0x000000501  The current thread has already been converted from a fiber.
0x000000502  The system has detected a stack-based buffer overflow in this application. This overflow could potentially allow a malicious user to take control of this application.
0x000000503  There is more data in one of the parameters than the function can handle.
0x00000504  An attempt to perform an operation on a debug object failed because the object is being deleted.
0x00000505  An attempt to delay load a DLL file or get a function address in a delay loaded DLL file failed.
0x000000507  There is insufficient information to identify the cause of the error.
0x00000508  The parameter passed to a C runtime function is incorrect.
0x000000509  The operation has exceeded the valid data length of the file.
0x00000050A  Service startup failed because at least one service in the same process has an incompatible service SID type setting. A service with a restricted service SID type can only coexist in the same process with other services with a restricted SID type. If the service SID type has just been configured for this service, the hosting process must be restarted to start this service.
0x000000050B  The process hosting the driver for this device has ended.
0x00000050C  An operation attempted to exceed an implementation-defined limit.
0x0000050D 1293 Either the target process or the process containing the target thread is a protected process.
0x0000050E 1294 The service notification client is too far behind the current state of services on the computer.
0x000000050F  To free up disk space, move files to another location or delete unnecessary files. Receive further information from your system administrator.
0x00000510  The requested file operation failed because the storage policy blocks this file type. Receive further information from your system administrator.
0x00000511  You can use the Microsoft Management Console (MMC) Services snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view the service configuration and account configuration.
0x00000512  A thread involved in this operation appears to be unresponsive.
0x000000513  Indicates that a particular security ID may not have been assigned as an object's label.
0x000000514  Not all privileges or groups referenced are assigned to the caller.
0x00000515  Some mappings between account names and security IDs were not performed.
0x00000516  No system quota limits have been set for this account.
0x00000517  No encryption key is available. A known encryption key was returned.
0x00000518  The password is too complex to convert to a LAN Manager password. The LAN Manager password returned is a NULL string.
0x000000519  The revision level is unknown.
0x000000051A  Indicates two revision levels are incompatible.
0x00000051B  This security ID cannot be assigned as the owner of this object.
0x00000051C  This security ID cannot be assigned as the primary group of an object.
0x00000051D  An attempt was made to work with an impersonation token from a thread that is not currently impersonating a client.
0x00000051E  The group must not be deactivated.
0x000000051F  No login servers are currently available to process the login request.
0x00000520  A specified login session does not exist. It may have already been cancelled.
0x00000521  A specified privilege does not exist.
0x00000522  The client does not have a required permission.
0x00000523  The name provided is not a properly formed account name.
0x00000524  The specified account already exists.
0x00000525  The specified account does not exist.
0x00000526  The specified group already exists.
0x00000527  The specified group does not exist.
0x00000528  Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member.
0x00000529  The specified user account is not a member of the specified group account.
0x00000052A  The last remaining administrator account cannot be deactivated or deleted.
0x00000052B  The password could not be updated. The value specified as the current password is incorrect.
0x00000052C  The password cannot be updated. The value provided for the new password contains values that are not allowed in passwords.
0x00000052D  The password cannot be updated. The value provided for the new password does not meet the length, complexity, or history requirements of the domain.
0x00000052E  Login Error: Unknown username or bad password.
0x00000052F  Login error: Restriction of user account. Possible reasons are invalid blank passwords, login time limitations, or a policy restriction was enforced.
0x00000530  Logon error: violating the account logon time limit.
0x00000531  Logon Error: User is not allowed to log on to this computer.
0x00000532  Login failure: The specified account password has expired.
0x00000533  Login Error: Account currently disabled.
0x000000534  No mapping between account names and security IDs was made.
0x00000535  Too many local user IDs (LUIDs) were requested at the same time.
0x000000536  No more local user IDs (LUIDs) available.
0x00000537  The sub-authority portion of a security ID is invalid for this specific use.
0x00000538  The access control list (ACL) structure is invalid.
0x00000539  The security ID structure is invalid.
0x00000053A  The security descriptor structure is invalid.
0x00000053C  The inherited access control list (ACL) or access control entry (ACE) could not be created.
0x00000053D  The server is currently disabled.
0x00000053E  The server is currently activated.
0x00000053F  The value specified was an invalid value for an ID authority.
0x000000540  There is no more storage available for security information updates.
0x00000541  The specified attributes are invalid or incompatible with the attributes for the group as a whole.
0x000000542  Either a required impersonation level was not provided or the provided impersonation level is invalid.
0x00000543  An anonymous security token cannot be opened.
0x00000544  The requested validation information class was invalid.
0x000000545  The token type is inappropriate for the attempted use.
0x00000546  Unable to perform a security operation on an object that has no associated security.
0x00000547  Configuration information could not be read from the domain controller, either because the computer is unavailable or access was denied.
0x00000548  The Security Account Manager (SAM) or Local Security Authority (LSA) server was in the wrong state to perform the security operation.
0x00000549  The domain was in the wrong state to perform the security operation.
0x00000054A  This operation is only allowed on the domain's primary domain controller.
0x00000054B  The specified domain either does not exist or could not be contacted.
0x00000054C  The specified domain already exists.
0x00000054D  An attempt was made to exceed the limit for the number of domains per server.
0x00000054E  The requested operation could not be completed due to a fatal media error or data structure corruption on the hard drive.
0x0000054F 1359 An internal error has occurred.
0x00000550  Generic access types were contained in an access mask that should already be mapped to non-generic types.
0x00000551  A security descriptor is not in the correct format (absolute or self-referential).
0x000000552  The requested action may only be used by login processes. The calling process has not registered as a login process.
0x000000553  Unable to start a new login session with an ID already in use.
0x00000554  A specified authentication package is unknown.
0x000000555  The login session is not in a state that matches the requested operation.
0x00000556  The login session ID is already in use.
0x00000557  A login request contained an invalid value for the login type.
0x00000558  Impersonation with a named pipe is not possible until data has been read from that pipe.
0x00000559  The transaction status of a registry subtree is incompatible with the requested operation.
0x00000055A  Internal security database corruption was detected.
0x00000055B  This operation cannot be performed on built-in accounts.
0x00000055C  This operation cannot be performed on this built-in special group.
0x00000055D  This operation cannot be performed for this built-in special user.
0x00000055E  The user cannot be removed from a group because the group is currently the user's primary group.
0x000000055F  The token is already in use as the primary token.
0x00000560  The specified local group does not exist.
0x00000561  The specified account name is not a member of the group.
0x00000562  The specified account name is already a member of the group.
0x00000563  The specified local group already exists.
0x00000564  Logon Error: The user was not granted the requested logon type on this computer.
0x000000565  The maximum number of secrets that can be stored on a single system has been exceeded.
0x00000566  The length of a secret exceeds the maximum length allowed.
0x00000567  The Local Security Authority database contains an internal inconsistency.
0x00000568  During a login attempt, the user's security context accumulated too many security IDs.
0x00000569  Logon Error: The user was not granted the requested logon type on this computer.
0x00000056A  A cross-encrypted password is required to change a user's password.
0x00000056B  A member could not be added or removed from the local group because the member does not exist.
0x00000056C  A new member could not be added to a local group because the member has the wrong account type.
0x00000056D  Too many security IDs were specified.
0x0000056E  A cross-encrypted password is required to change this user password.
0x0000056F 1391 Indicates that an ACL does not contain any inheritable components.
0x000000570  The file or directory is corrupt and unreadable.
0x00000571  The volume structure is corrupt and unreadable.
0x00000572  There is no user session key for the specified login session.
0x000000573  The service being accessed is licensed for a specific number of connections. At this point, no more connections can be made to the service because there are already as many connections as the service can accept.
0x00000574  Login error: The target account name is incorrect.
0x00000575  Mutual authentication failed. The server's password is out of date on the domain controller.
0x00000576  There is a time and/or date difference between client and server.
0x00000577  This operation cannot be performed in the current domain.
0x00000578  Invalid window handle.
0x00000579  Invalid menu handle.
0x00000057A  Invalid cursor handle.
0x00000057B  Invalid accelerator table handle.
0x00000057C  Invalid hook handle.
0x00000057D  Invalid handle to a multi-window location structure.
0x00000057E 1406] Cannot create a top-level child window.
0x00000057F  Cannot find the window class.
0x00000580 1408 Invalid window; that belongs in another thread.
0x000000581  Hotkey is already registered.
0x00000582  Class already exists.
0x00000583  Class does not exist.
0x000000584 1412 Class still has open windows.
0x00000585  Invalid index.
0x00000586  Invalid symbol handle.
0x00000587  Using private DIALOG window words.
0x00000588  The list box identifier was not found.
0x00000589 1417 No placeholders were found.
0x00000058A  Thread does not have an open clipboard.
0x000000058B  Hotkey is not registered.
0x00000058C  The window is not a valid dialog window.
0x0000058D  Control ID not found.
0x00000058E  Invalid message for a combo box because it has no edit control.
0x00000058F  The window is not a combo box.
0x00000590  Height must be less than 256.
0x00000591  Invalid device context (DC) handle.
0x00000592  Invalid hook procedure type.
$000593 1427 Invalid hook procedure.
0x00000594  Cannot set a non-local hook without a module handle.
0x00000595 1429 This hook procedure can only be set globally.
0x00000596  The journal hook procedure is already installed.
0x00000597  The hook procedure is not installed.
0x00000598  Invalid message for single-selection list box.
0x00000599 1433 LB_SETCOUNT sent to non-delayed listbox.
0x00000059A  This list box does not support tabs.
0x00000059B  Cannot destroy object created by another thread.
0x00000059C  Child windows cannot have menus.
0x00000059D  The window has no system menu.
0x0000059E  Invalid message field style.
0x0000059F 1439 Invalid system-wide (SPI_*) parameter.
0x000005A0 1440 Screen already locked.
0x000005A1  All handles to windows in a multi-window location structure must have the same parent.
0x00005A2  The window is not a child window.
0x000005A3  Invalid GW_* command.
0x00005A4  Invalid thread ID.
0x00005A5  A message from a window that is not an MDI (Multiple Document Interface) window cannot be processed.
0x000005A6  Popup menu already active.
0x000005A7  The window has no scroll bars.
0x000005A8 1448 The area of the scrollbar cannot be greater than MAXLONG.
0x00005A9  The window cannot be displayed or removed as specified.
0x000005AA 1450 There are not enough system resources to perform the requested service.
0x000005AB 1451 There are not enough system resources to run the requested service.
0x000005AC  There are not enough system resources to perform the requested service.
0x000005AD 1453 Insufficient quota to complete the requested service.
0x000005AE 1454 Insufficient quota to complete the requested service.
0x000005AF  The paging file is too small to complete this operation.
0x000005B0  A menu item was not found.
0x00005B1  Invalid keyboard layout handle.
0x000005B2  Hook type not allowed.
0x00005B3  This operation requires an interactive window station.
0x000005B4 1460 This operation returned because the timeout period expired.
0x00005B5  Invalid monitor handle.
0x00005B6  Wrong size argument.
0x00005B7  The symbolic link cannot be followed because its type is disabled.
0x000005B8  This application does not support the current operation on symbolic links.
0x000005B9  Windows could not parse the requested XML data.
0x000005BA  An error occurred while processing an XML digital signature.
0x000005BB  This application needs to be restarted.
0x000005BC 1468 The caller made the connection request in the wrong routing shelf.
0x000005BD  An AuthIP error occurred while attempting to connect to the remote host.
0x000005BE 1470 There are not enough NVRAM resources to run the requested service. A reboot may be required.
0x000005DC  The event log file is corrupt.
0x000005DD  An event log file could not be opened, therefore the event logging service did not start.
0x000005DE  The event log file is full.
0x000005DF  The event log file has changed between reads.
0x00000060E  The specified task name is invalid.
0x000000060F  The specified task index is invalid.
0x000000610  The specified thread is already participating in a task.
0x000000641  The Windows Installer service could not be accessed. This can occur if the Windows Installer is not installed correctly. Contact your support staff for assistance.
0x00000642  The user canceled the installation.
0x00000643  Fatal error during installation.
0x00000644  Installation stopped, incomplete.
0x000000645  This promotion only applies to currently installed products.
0x00000646  Feature ID not registered.
0x00000647  Component ID not registered.
0x00000648  Unknown property.
0x00000649  Handle is in an invalid state.
0x00000064A  The configuration data for this product is corrupt. Contact your support.
0x00000064B  Component identifier does not exist.
0x00000064C  The installation source for this product is not available. Make sure the source exists and you can access it.
0x000000064D  This installation package cannot be installed by the Windows Installer service. You must install a Windows Service Pack that includes a newer version of the Windows Installer service.
0x00000064E  The product has been uninstalled.
0x00000064F  SQL query syntax invalid or unsupported.
0x000000650  Record field does not exist.
0x000000651  The device was removed.
0x000000652  Another installation is already in progress. Complete this installation before proceeding with this installation.
0x000000653  This installation package could not be opened. Make sure the package exists and you can access it, or contact the application vendor to verify that it is a valid Windows Installer package.
0x000000654  This installation package could not be opened. Contact the application manufacturer to verify that this is a valid Windows Installer package.
0x000000655  An error occurred while starting the Windows Installer service user interface. Contact your support.
0x00000656  Error opening installation log file. Ensure that the specified log file location exists and is writable.
0x000000657  The language of this installation package is not supported by your system.
0x00000658  Error applying transforms. Ensure that the specified transformation paths are valid.
0x000000659  This installation is prohibited by system policy. Consult your system administrator.
0x0000065A  Function could not be executed.
0x0000065B 1627 Function failed during execution.
0x0000065C  Invalid or unknown table specified.
0x00000065D  The data supplied is of the wrong type.
0x00000065E  Data of this type is not supported.
0x00000065F  The Windows Installer service failed to start. Contact your support.
0x000000660  The Temp folder is on a drive that is full or inaccessible. Free up disk space or make sure you have write permissions for the Temp folder.
0x000000661  This installation package is not supported on this processor type. Contact your product provider.
0x000000662  Component is not used on this computer.
0x00000663  This update package could not be opened. Verify that the update package is present and accessible, or contact the application vendor to verify that the Windows Installer update package is valid.
0x000000664  This update package could not be opened. Contact the application vendor to verify that this is a valid Windows Installer update package.
0x000000665  This update package cannot be processed by the Windows Installer service. You must install a Windows Service Pack that includes a newer version of the Windows Installer service.
0x000000666  Another version of this product is already installed. The installation of this version cannot continue. To configure or remove the existing version of this product, use Add/Remove Programs in Control Panel.
0x00000667  Invalid command line argument. For detailed command-line help, see the Windows Installer SDK.
0x00000668  Only administrators have permission to add, remove, or configure server software during a remote Terminal Services session. If you want to install or configure software on the server, contact your network administrator.
0x00000669  The requested operation completed successfully. The system will reboot for the changes to take effect.
0x000000066A  The Windows Installer service cannot install the upgrade because the program to be upgraded may be missing or the upgrade may upgrade a different version of the program. Make sure you have the program to be updated on your computer and that you have the correct upgrade.
0x00000066B  The update package is not allowed by the software restriction policy.
0x00000066C  One or more customizations are not allowed by the software restriction policy.
0x00000066D  The Windows Installer does not allow installation via a remote desktop connection.
0x00000066E  Uninstalling the update package is not supported.
0x00000066F  The update is not applied to this product.
0x000000670  A valid sequence for the set of updates could not be found.
0x000000671  The policy disallowed the removal of the update.
0x00000672  The XML update data is invalid.
0x000000673  Windows Installer does not allow updating managed advertised products. At least one feature of the product must be installed before the update is applied.
0x000000674  Windows Installer service cannot be accessed in safe mode. Please try again if your computer is not in safe mode, or use system restore to restore your computer to a previous good state.
0x000000675  A fail fast exception occurred. Exception handlers are not invoked and the process terminates immediately.
0x000006A4  The string binding is invalid.
0x00006A5  The bind handle is not the correct type.
0x00006A6  The binding handle is invalid.
0x00006A7  The RPC protocol sequence is not supported.
0x00006A8  The RPC protocol sequence is invalid.
0x00006A9  The string's universally unique identifier (UUID) is invalid.
0x000006AA  The endpoint format is invalid.
0x000006AB 1707 The network address is invalid.
0x000006AC 1708 No endpoint was found.
0x000006AD  The timeout value is invalid.
0x000006AE  The universally unique object identifier (UUID) was not found.
0x000006AF  The object universally unique identifier (UUID) has already been registered.
0x000006B0  The Universal Unique Identifier (UUID) type has already been registered.
0x000006B1  The RPC server is already listening.
0x000006B2 1714 No log sequences were registered.
0x00006B3  The RPC server is not listening.
0x00006B4  The manager type is unknown.
0x00006B5  The interface is unknown.
0x000006B6 1718 There are no bindings.
0x000006B7 1719 There are no log sequences.
0x00006B8  The endpoint cannot be created.
0x00006B9  Not enough resources are available to complete this operation.
0x000006BA  The RPC server is not available.
0x000006BB  The RPC server is too busy to complete this operation.
0x000006BC  The network options are invalid.
0x000006BD  There are no active remote procedure calls on this thread.
0x000006BE  The remote procedure call failed.
0x000006BF  The remote procedure call failed and was not executed.
0x000006C0  A remote procedure call (RPC) protocol error has occurred.
0x000006C1  Access to the HTTP proxy was denied.
0x000006C2  The transfer syntax is not supported by the RPC server.
0x00006C4  The Universal Unique Identifier (UUID) type is not supported.
0x000006C5 1733 The tag is invalid.
0x00006C6  The array bounds are invalid.
0x00006C7  The binding does not contain an entry name.
0x00006C8  The name syntax is invalid.
0x00006C9  The name syntax is not supported.
0x000006CB  No network address available to create a universally unique identifier (UUID).
0x000006CC  The endpoint is a duplicate.
0x000006CD  The authentication type is unknown.
0x000006CE 1742 The maximum number of calls is too low.
0x000006CF 1743 The string is too long.
0x000006D0  The RPC protocol sequence was not found.
0x000006D1 1745 The procedure number is out of range.
0x00006D2  The binding does not contain authentication information.
0x00006D3  The authentication service is unknown.
0x00006D4  The authentication level is unknown.
0x00006D5  The security context is invalid.
0x00006D6  The authorization service is unknown.
0x000006D7 1751 The entry is invalid.
0x00006D8  The server endpoint cannot perform the operation.
0x000006D9  No more endpoints are available from the endpoint mapper.
0x000006DA  No interfaces were exported.
0x00006DB  The entry name is incomplete.
0x000006DC  The version option is invalid.
0x000006DD  There are no more members.
0x000006DE  There is nothing to undo the export.
0x000006DF  The interface was not found.
0x000006E0 1760 The entry already exists.
0x000006E1 1761 The entry was not found.
0x00006E2  The name service is not available.
0x00006E3  The network address family is invalid.
0x00006E4  The requested operation is not supported.
0x000006E5  No security context is available to allow impersonation.
0x00006E6  An internal error occurred during a remote procedure call (RPC).
0x000006E7 1767 The RPC server attempted to divide an integer by zero.
0x00006E8  An addressing error occurred in the RPC server.
0x000006E9  A floating point operation on the RPC server caused a divide by zero.
0x000006EA  A floating point underflow has occurred on the RPC server.
0x000006EB 1771 A floating point overflow has occurred on the RPC server.
0x000006EC  The list of available RPC servers for binding autohandles is exhausted.
0x000006ED  The character translation table file could not be opened.
0x000006EE  The character translation table file is less than 512 bytes.
0x000006EF  A null context handle was passed from the client to the host during a remote procedure call.
0x000006F1  The context handle has changed during a remote procedure call.
0x00006F2  The binding handles passed to a remote procedure call do not match.
0x000006F3  The stub cannot get the remote procedure call handle.
0x000006F4 1780 A null reference pointer was passed to the stub.
0x00006F5  The enumeration value is out of range.
0x000006F6  The number of bytes is too small.
0x000006F7 1783 The stub received bad data.
0x000006F8 1784 The provided user buffer is not valid for the requested operation.
0x00006F9  The disk is not recognized. It must not be formatted.
0x000006FA  The workstation does not have a trust secret.
0x00006FB  The security database on the server does not have a computer account for this workstation trust.
0x000006FC  The trust relationship between the primary domain and the trusted domain failed.
0x000006FD  The trust relationship between this workstation and the primary domain failed.
0x000006FE  The network logon failed.
0x000006FF  A remote procedure call is already in progress for this thread.
0x000000700  An attempt was made to log on but the network logon service did not start.
0x000000701  The user's account has expired.
0x000000702  The redirector is in use and cannot be unloaded.
0x000000703  The specified printer driver is already installed.
0x000000704  The specified port is unknown.
0x000000705  The printer driver is unknown.
0x000000706  The print processor is unknown.
0x000000707  The specified delimiter file is invalid.
0x000000708  The specified priority is invalid.
0x000000709  The printer name is invalid.
0x0000070A 1802 The printer already exists.
0x000000070B  The printer command is invalid.
0x0000070C 1804 The specified data type is invalid.
0x00000070D  The specified environment is invalid.
0x0000070E  There are no more bindings.
0x000000070F  The account used is a cross-domain trust account. Use your global user account or your local user account to access this server.
0x000000710  The account used is a computer account. Use your global user account or your local user account to access this server.
0x000000711  The account used is a server trust account. Use your global user account or your local user account to access this server.
0x000000712  The name or security identifier (SID) of the specified domain does not match the trust information for that domain.
0x000000713  The server is in use and cannot be unloaded.
0x000000714  The specified image file did not contain a resource section.
0x000000715  The specified resource type cannot be found in the image file.
0x000000716  The specified resource name cannot be found in the image file.
0x000000717  The specified resource language ID cannot be found in the image file.
0x000000718  Not enough quota available to process this command.
0x000000719  No interfaces were registered.
0x00000071A  The remote procedure call was canceled.
0x00000071B  The binding handle does not contain all the required information.
0x00000071C  A communication error occurred during a remote procedure call.
0x00000071D  The requested authentication level is not supported.
0x00000071E  No principal name registered.
0x00000071F  The specified error is not a valid Windows RPC error code.
0x000000720  A UUID valid only on this computer was assigned.
0x000000721 1825 A security package specific error has occurred.
0x000000722  Thread was not aborted.
0x00000723  Invalid operation on encode/decode handle.
0x000000724  Incompatible version of serialization package.
$0000725 1829 Inkompatible Version des RPC-Stubs.
0x00000726  The RPC pipe object is invalid or corrupt.
0x00000727  An illegal operation was attempted on an RPC pipe object.
0x00000728  Unsupported RPC pipe version.
0x000000729  The HTTP proxy server rejected the connection because cookie authentication failed.
0x000000076A  The group member was not found.
0x00000076B  The endpoint mapper database entry could not be created.
0x0000076C 1900 Der Object Universal Unique Identifier (UUID) ist die Null-UUID.
0x000000076D  The specified time is invalid.
0x000000076E  The specified form name is invalid.
0x000000076F  The specified form size is invalid.
0x000000770  Already waiting for the specified printer handle
0x000000771  The specified printer has been deleted.
0x000000772  The status of the printer is invalid.
0x000000773  User's password must be changed before first login.
0x000000774  The domain controller for this domain could not be found.
0x000000775  The referenced account is currently locked out and may not be logged in.
0x000000776  The specified object exporter was not found.
0x000000777  The specified object was not found.
0x00000778  The specified object resolution set was not found.
0x000000779  Some data still needs to be sent in the request buffer.
0x00000077A  Invalid handle for asynchronous remote procedure calls.
0x00000077B  Invalid asynchronous RPC call handle for this operation.
0x00000077C  The RPC pipe object has already been closed.
0x0000077D 1917 The RPC call completed before all pipes were processed.
0x0000077E  There is no more data available from the RPC pipe.
0x000000077F  No site name is available for this computer.
0x000000780  The system cannot access the file.
0x000000781  The system cannot resolve the name of the file.
0x000000782  The entry is not of the expected type.
0x000000783  Failed to export all object UUIDs to the specified entry.
0x000000784  Failed to export interface to the specified entry.
0x000000785  The specified profile entry could not be added.
0x000000786  The specified profile item could not be added.
0x000000787  The specified profile item could not be removed.
0x000000788  The group item could not be added.
0x000000789  The group item could not be removed.
0x000000078A  The printer driver is not compatible with a policy that is enabled on your computer that blocks NT 4.0 drivers.
0x0000078B 1931 The context has expired and can no longer be used.
0x00000078C  The current user's delegated trust creation quota has been exceeded.
0x0000078D  The total quota for creating delegated trusts has been exceeded.
0x00000078E  The current user's delegated trust delete quota has been exceeded.
0x0000078F  Logon Error: The computer you are logging on to is protected by an authentication firewall. The specified account must not authenticate to the machine.
0x00000790  Remote connections to the print spooler are blocked by a policy set on your computer.
0x000000791  Login Error: Authentication failed because NTLM authentication has been disabled.
0x000007D0  The pixel format is invalid.
0x000007D1  The specified driver is invalid.
0x000007D2  The window style or class attribute is invalid for this operation.
0x000007D3  The requested metafile operation is not supported.
0x000007D4  The requested transform operation is not supported.
0x000007D5  The requested clipping operation is not supported.
0x000007DA  The specified color management engine is invalid.
0x000007DB  The specified color profile is invalid.
0x000007DC  The specified tag was not found.
0x000007DD  A required tag does not exist.
0x000007DE  The specified tag already exists.
0x000007DF  The specified color profile is not associated with the specified device.
0x000007E0  The specified color profile was not found.
0x000007E1  The specified color space is invalid.
0x000007E2  Image color management is not enabled.
0x000007E3  An error occurred while deleting the color transformation.
0x000007E4  The specified color transformation is invalid.
0x000007E5  The specified transformation does not match the color space of the bitmap.
0x000007E6  The specified named color index does not exist in the profile.
0x000007E7  The specified profile is intended for a device of a different type than the specified device.
0x000000836  The workstation driver is not installed.
0x000000837  The server could not be found.
0x000000838  An internal error has occurred. The network cannot access a shared memory segment.
0x000000839  A lack of network resources has occurred.
0x00000083A  This operation is not supported on workstations.
0x0000083B 2107 The device is not connected.
0x00000842  The server service did not start.
0x000000843  The queue is empty.
0x00000844  The device or directory does not exist.
0x00000845  The operation is invalid on a redirected resource.
0x000000846  The name has already been shared.
0x000000847  The server does not currently have the requested resource.
0x000000849  The requested addition of items exceeds the maximum allowed.
0x000000084A  The peer service only supports two concurrent users.
0x000000084B  The API return buffer is too small.
0x0000084F 2127 A remote API error has occurred.
0x000000853  An error occurred while opening or reading the configuration file.
0x00000858  A general network error has occurred.
0x000000859  The workstation service is in an inconsistent state. Restart the computer before restarting the workstation service.
0x00000085A  The workstation service did not start.
0x000000085B  The requested information is not available.
0x000000085C  An internal Windows error has occurred.
0x00000085D  The server is not configured for transactions.
0x000000085E  The requested API is not supported on the remote server.
0x00000085F  The event name is invalid.
0x000000860  The computer name already exists on the network. Change it and restart the computer.
0x000000862  The specified component could not be found in the configuration information.
0x000000863  The specified parameter could not be found in the configuration information.
0x000000865  A line in the configuration file is too long.
0x000000866  The printer does not exist.
0x00000867  The print job does not exist.
0x000000868  The printer destination cannot be found.
0x00000869  The printer destination already exists.
0x00000086A  The print queue already exists.
0x000000086B  No more printers can be added.
0x000000086C  No more print jobs can be added.
0x000000086D  No more printer targets can be added.
0x0000086E 2158 This printer target is idle and cannot accept control operations.
0x000000086F  This printer target request contains an invalid control function.
0x000000870  The print processor is not responding.
0x000000871  The spooler is not running.
0x000000872  This operation cannot be performed on the print target in its current state.
0x000000873  This operation cannot be performed on the print queue in its current state.
0x000000874  This operation cannot be performed on the print job in its current state.
0x00000875  A spooler memory allocation error has occurred.
0x000000876  The device driver does not exist.
0x00000877 2167 The data type is not supported by the print processor.
0x000000878  The print processor is not installed.
0x00000884  The service database is locked.
0x000000885  The service table is full.
0x000000886  The requested service has already started.
0x000000887  The service does not respond to control actions.
0x00000888  The service did not start.
0x000000889  The service name is invalid.
0x000000088A  The service is not responding to the control function.
0x00000088B  The service control is busy.
0x00000088C  The configuration file contains an invalid utility name.
0x00000088D  The service could not be controlled in its current state.
0x0000088E 2190 The service terminated abnormally.
0x00000088F  The requested stop, continue, or stop is not valid for this service.
0x00000890  The service control dispatcher could not find the service name in the dispatch table.
0x00000891  Reading the service control dispatcher pipe failed.
0x00000892  A thread for the new service could not be created.
0x000000898  This workstation is already logged on to the local network.
0x000000899  The workstation is not logged on to the local network.
0x00000089A  The username or group name parameter is invalid.
0x0000089B 2203 The password parameter is invalid.
0x00000089C  The login processor did not add the message alias.
0x00000089D  The login processor did not add the message alias.
0x00000089E  The logout processor did not delete the message alias.
0x00000089F  The logout processor did not delete the message alias.
0x000008A1  Network logons suspended.
0x000008A2  A centralized login server conflict has occurred.
0x000008A3  The server is configured without a valid user path.
0x000008A4  An error occurred while loading or running the login script.
0x000008A6  The logon server was not specified. Your computer will be logged on as STANDALONE.
0x000008A7  The login server could not be found.
0x000008A8  A logon domain already exists for this computer.
0x000008A9  The login server could not validate the login.
0x000008AB  The security database could not be found.
0x000008AC  The group name could not be found.
0x000008AD  The username could not be found.
0x000008AE  The resource name could not be found.
0x000008AF 2223 The group already exists.
0x000008B0 2224 The account already exists.
0x000008B1  The resource permission list already exists.
0x000008B2  This operation is only allowed on the domain's primary domain controller.
0x000008B3  The security database was not started.
0x000008B4  There are too many names in the user accounts database.
0x000008B5  A disk I/O error has occurred.
0x000008B6  The limit of 64 entries per resource has been exceeded.
0x000008B7  Deleting a user with a session is not allowed.
0x000008B8  The parent directory could not be found.
0x000008B9  The security database session cache segment could not be added.
0x000008BA  This operation is not allowed for this specific group.
0x000008BB  This user is not cached in the user accounts database session cache.
0x000008BC  The user already belongs to this group.
0x000008BD  The user does not belong to this group.
0x000008BE  This user account is not defined.
0x000008BF  This user account has expired.
0x000008C0  The user is not allowed to log on from this workstation.
0x000008C1  The user is currently not allowed to log on.
0x000008C2 2242 This user's password has expired.
0x000008C3  This user's password cannot be changed.
0x000008C4  This password cannot be used now.
0x000008C5  The password does not meet the requirements of the password policy. Review minimum password length requirements, password complexity, and password history.
0x00008C6  This user's password is too new to change.
0x00008C7  The security database is corrupt.
0x000008C8 2248] No updates are required for this replicating network/local security database.
0x000008C9  This replicant database is outdated; synchronization required.
0x000008CA  The network connection could not be found.
0x000008CB  This asg_type is invalid.
0x000008CC  This device is currently being shared.
0x000008CD  The user name may not be the same as the computer name.
0x000008DE  The computer name could not be added as a message alias. The name may already exist on the network.
0x000008DF 2271 Messenger service has already started.
0x000008E0 2272 The messenger service could not be started.
0x000008E1  The message alias could not be found on the network.
0x000008E2 2274 This message alias has already been forwarded.
0x000008E3  This message alias was added but is still being forwarded.
0x000008E4  This message alias already exists locally.
0x000008E5  The maximum number of added message aliases was exceeded.
0x000008E6  The computer name could not be deleted.000000008E7  Messages cannot be sent back to the same workstation.
0x000008E8 2280 An error occurred in the domain message processor.
0x000008E9  The message was sent, but the recipient stopped the messenger service.
0x000008EA  The message was sent but not received.
0x000008EB 2283 The message alias is currently in use. Try again later.
0x000008EC 2284 The messenger service did not start.
0x000008ED  The name is not on the local computer.
0x000008EE  The forwarded message alias could not be found on the network.
0x000008EF 2287 The message alias table on the remote station is full.
0x000008F0  Messages for this alias will not be forwarded at this time.
0x000008F1  The broadcast message was truncated.
0x000008F6  This is an invalid device name.
0x000008F7  A write error occurred.
0x00008F9  A duplicate message alias exists on the network.
0x000008FA  This message alias will be deleted later.
0x000008FB  The message alias was not successfully deleted from all networks.
0x000008FC  This operation is not supported on computers with multiple networks.
0x000000906  This shared resource does not exist.
0x000000907  This device will not be shared.
0x000000908  No session with this computer name exists.
0x000000090A  There is no open file with this identification number.
0x000000090B  An error occurred while executing a remote administration command.
0x000000090C  An error occurred while opening a remote temporary file.
0x000000090D  The data returned from a remote administration command was truncated to 64K.
0x000000090E  This device cannot be shared as both a spooled and unspooled resource.
0x000000090F  The information in the server list may be incorrect.
0x000000910  The computer is not active in this domain.
0x000000911  The share must be removed from the distributed file system before it can be deleted.
0x00000091B  The operation is invalid for this device.
0x000000091C  This device cannot be shared.
0x00000091D  This device was not open.
0x00000091E  This device name list is invalid.
0x00000091F  The queue priority is invalid.
0x000000921  There are no shared communication devices.
0x000000922  The specified queue does not exist.
0x00000924  This device list is invalid.
0x000000925  The requested device is invalid.
0x000000926  This device is already in use by the spooler.
0x000000927  This device is already in use as a communication device.
0x00000092F  This computer name is invalid.
0x000000932  The specified string and prefix are too long.
0x00000934  This path component is invalid.
0x000000935  The input type could not be determined.
0x000000093A  Type buffer is not large enough.
0x000000942  Profile files cannot exceed 64 KB.
0x000000943  The start offset is out of range.
0x000000944  The system cannot delete current connections to network resources.
0x000000945  The system could not parse the command line in this file.
0x000000946  An error occurred while loading the profile file.
0x000000947  Errors occurred while saving the profile file. The profile has been partially saved.
0x000000949  Log file *** is full.
0x000000094A  This log file has changed between reads.
0x000000094B  Log file *** is corrupt.
0x000000094C  The source path cannot be a directory.
0x00000094D  The source path is invalid.
0x00000094E  The destination path is invalid.
0x00000094F  The source and destination paths are on different servers.
0x000000951  The requested run server has stopped.
0x000000955  An error occurred while communicating with a run server.
0x000000957  An error occurred starting a background process.
0x000000958  The shared resource you are connected to could not be found.
0x000000960  The LAN adapter number is invalid.
0x000000961  There are open files on the connection.
0x000000962  Active connections still exist.
0x000000963  This share name or password is invalid.
0x000000964  The device is being accessed by a running process.
0x000000965  The drive letter is used locally.
0x000000097E  The specified client is already registered for the specified event.
0x000000097F  The warning table is full.
0x000000980  An invalid or nonexistent alert name was raised.
0x00000981  The alert recipient is invalid.
0x00000982  because the user's login times are no longer valid.
0x000000988  The log file does not contain the requested record number.
0x000000992  The user accounts database is not configured correctly.
0x000000993  This operation is not allowed when the Netlogon service is running.
0x000000994  This operation is not allowed on the last administrator account.
0x000000995  Could not find domain controller for this domain.
0x000000996  Could not set credentials for this user.
0x000000997  The Netlogon service did not start.
0x000000998  Unable to add to user accounts database.
0x000000999  This server's clock is not synchronized with the primary domain controller's clock.
0x000000099A  A password conflict was detected.
0x000000099C  The server identification does not specify a valid server.
0x00000099D  The session identifier does not indicate a valid session.
0x0000099E 2462 The connection identifier does not indicate a valid connection.
0x000000099F  There is no space for another entry in the available servers table.
0x000009A0 2464 The server has reached the maximum supported number of sessions.
0x000009A1  The server has reached the maximum number of connections it supports.
0x000009A2  The server cannot open any more files because it has reached its maximum number.
0x000009A3  There are no alternate servers registered on this server.
0x000009A6  Try a lower version (Remote Admin Protocol) of the API instead.
0x0000009B0  The UPS service could not access the UPS driver.
0x000009B1  The UPS service is not configured correctly.
0x000009B2  The UPS service could not access the specified comm port.
0x000009B3 2483 The UPS has indicated a line failure or low battery. Service not started.
0x000009B4  The UPS service was unable to shut down the system.
0x000009C4  The following program returned an MS-DOS error code:
0x000009C5  The following program requires more memory:
0x000009C6  The following program called an unsupported MS-DOS function:
0x000009C7  The workstation failed to start.
0x000009C8  The following file is corrupt.
0x000009C9  No loader is specified in the boot block definition file.
0x000009CA  NetBIOS returned an error: The NCB and SMB are printed above.
0x000009CB 2507 A disk I/O error has occurred.
0x000009CC 2508 Image parameter replacement failed.
0x000009CD 2509 Too many image parameters exceed hard disk sector boundaries.
0x000009CE  The image was not generated from an MS-DOS disk formatted with /S.
0x000009CF  Remote Boot will restart later.
0x0000009D0  The call to the remote boot server failed.
0x000009D1  Unable to connect to remoteboot server.
0x000009D2  The image file cannot be opened on the remote boot server.
0x000009D3  Connecting to remoteboot server...
0x000009D4  Connecting to remoteboot server...
0x000009D5 2517 The remote boot service has stopped; Check the error log for the cause of the problem.
0x000009D6  Remote boot startup failed; Check the error log for the cause of the problem.
0x000009D7  A second connection to a remote boot resource is not allowed.
0x000009F6 2550 The browser service was configured with MaintainServerList=No.
0x00000A32  The service could not be started because none of the network adapters with this service were started.
0x00000A33  The service failed to start due to incorrect startup information in the registry.
0x00000A34  The service failed to start because its database is missing or corrupt.
0x00000A35  The service failed to start because the RPLFILES share is missing.
0x00000A36  The service failed to start because the RPLUSER group is missing.
0x00000A37  Cannot enumerate service records.
0x00000A38 2616 Workstation record information has been corrupted.
0x00000A39  Workstation entry not found.
0x00000A3A  Workstation name is in use by another workstation.
0x00000A3B  Profile record information has been corrupted.
0x00000A3C  Profile record not found.
0x00000A3D  The profile name is being used by another profile.
0x00000A3E  There are workstations using this profile.
0x00000A3F 2623 Configuration record information has been corrupted.
0x00000A40  Configuration record not found.
0x00000A41  Adapter ID entry information has been corrupted.
0x00000A42  An internal service error has occurred.
0x00000A43 2627 Vendor ID record information has been corrupted.
0x00000A44 2628 Boot block record information has been corrupted.
0x00000A45  The user account for this workstation entry is missing.
0x00000A46  The local RPLUSER group could not be found.
0x00000A47 2631 Boot block entry not found.
0x00000A48  Selected profile is incompatible with this workstation.
0x00000A49  The selected network adapter ID is in use by another workstation.
0x000000A4A  There are profiles using this configuration.
0x00000A4B  There are workstations, profiles, or configurations using this boot block.
0x00000A4C  The service failed to back up the remote boot database.
0x00000A4D  Adapter record not found.
0x00000A4E  Vendor record not found.
0x00000A4F 2639 The provider name is being used by another provider record.
0x00000A50  (boot name, vendor ID) is in use by another boot block entry.
0x000000A51  The configuration name is being used by another configuration.
0x00000A64  The internal database managed by the DFS service is corrupt
0x00000A65  One of the records in the internal DFS database is corrupt
0x00000A66 2662 There is no DFS name whose entry path matches the entered entry path
0x00000A67 2663 A root or link with the specified name already exists
0x00000A68  The specified server share is already shared in DFS
0x00000A69  The specified server share does not support the specified DFS namespace
0x00000A6A  The operation is invalid for this part of the namespace
0x00000A6B  The operation is invalid for this part of the namespace
0x00000A6C 2668 The operation is ambiguous because the connection has multiple servers
0x00000A6D 2669 A link could not be created
0x00000A6E 2670 The server is not DFS aware
0x00000A6F  The specified rename target path is invalid
0x00000A70  The specified DFS link is offline
0x00000A71  The specified server is not a server for this link
0x00000A72  A cycle in the DFS name was detected
0x00000A73  The operation is not supported on a server-based DFS
0x00000A74  This link is already supported by the specified server share
0x000000A75  The last server share supporting this root or link cannot be removed
0x00000A76  The operation is not supported for an inter-DFS connection
0x00000A77  The internal state of the DFS service has become inconsistent
0x00000A78  The DFS service was installed on the specified server
0x00000A79  The matched DFS data are identical
0x00000A7A 2682 Unable to delete DFS root - Uninstall DFS if necessary
0x00000A7B  A child or parent of the share is already in a DFS
0x00000A82  Internal DFS error
0x00000A83  This computer is already joined to a domain.
0x000000A84  This computer is not currently joined to a domain.
0x000000A85  This computer is a domain controller and cannot be removed from a domain.
0x000000A86  The destination domain controller does not support creating computer accounts in organizational units.
0x00000A87  The specified workgroup name is invalid.
0x00000A88  The specified computer name is incompatible with the default language used on the domain controller.
0x00000A89  The specified computer account could not be found. Contact an administrator to verify that the account is in the domain. If the account was deleted, disconnect, restart, and rejoin the domain.
0x00000A8A  This version of Windows cannot join a domain.
0x00000A8B  An attempt to resolve the DNS name of a domain controller in the domain being joined failed. Please verify that this client is configured to reach a DNS server that can resolve DNS names in the target domain. For network troubleshooting information, see Windows Help.
0x00000A8D 2701 Password must be changed at next login
0x00000A8E 2702 Account is locked
0x00000A8F  Password is too long
0x00000A90 2704 Password does not meet complexity policy
0x00000A91  Password does not meet the requirements of the filter DLLs
0x00000A95  Offline join completion information was not found.
0x00000A96  The offline join completion information was incorrect.
0x00000A97  Unable to create offline join information. Please make sure you have access to the specified path and have permission to change its content. Running as an elevated administrator may be required.
0x000000A98  The stored domain join information was incomplete or corrupt.
0x00000A99  Offline join operation completed successfully but requires a reboot.
0x00000A9A 2714 There was no offline join operation pending.
0x00000A9B  One or more requested computer or domain names cannot be set on the local computer.
0x00000A9C  The hostname of the current computer could not be compared to the value stored in the join completion information.
0x00000A9D  The specified offline registry hive could not be loaded. Please make sure you have access to the specified path and have permission to change its content. Running as an elevated administrator may be required.
0x00000A9E 2718 The minimum session security requirements for this operation were not met.
0x00000A9F  The provisioning blob version for computer accounts is not supported.
0x00000BB7  This is the last error in the NERR area.
0x000000BB8  The specified print monitor is unknown.
0x000000BB9  The specified printer driver is currently in use.
0x00000BBA  The spool file was not found.
0x00000BBB  A StartDocPrinter call was not issued.
0x00000BBC  An AddJob call was not issued.
0x00000BBD  The specified print processor has already been installed.
0x00000BBE  The specified print monitor has already been installed.
0x00000BBF  The specified print monitor does not have the required capabilities.
0x00000BC0  The specified print monitor is currently in use.
0x00000BC1  The requested operation is not allowed when there are jobs in the printer's queue.
0x00000BC2  The requested operation was successful. Changes will not take effect until the system is restarted.
- Affected Microsoft Windows operating systems.
- Hardware issues leading to various I/O errors/application failures or other events.
- Network issues causing disconnects, latency, or application issues.
- Optimizing or patching the operating system that lead to various errors or conditions.
While the following list doesn't guarantee a problem outside of an application, it's a good place to start, and assuming an external problem is generally the safest bet and most likely outcome.
This list is intended more as a warning to the supporter or customer that the error found is actually an operating system error, which in turn generally (though not always) reflects environmental problems.
Therefore, if you are looking for an error message and find this knowledgebase article, you should first start looking for environment errors unless there is compelling evidence that the error is due to critical application misbehavior, which is very rare .
- Environmental issue such as power outage, cable damage, or known hardware malfunction.
- Changes to hardware in the environment, including firmware, drivers, or even connection changes.
- Adding or removing hardware components to the environment or affected hosts.
- Changes to transport or hardware configurations.
- Updates to operating system patches or configurations.
- Increased load or operating window.
This list represents the complete list of Windows operating system net helpmsg entries from 0-15028. For the most part, the errors themselves are fairly explicit and clear in meaning.
In many areas there are numerous and large gaps, so that not all figures are represented. This list is compiled by Windows 7, but the messages themselves are generally global to the Windows family.
For more clarification on specific error messages, consult Microsoft or their online resources.
0x00000000  The operation completed successfully.
0x00000001  Incorrect function.
0x00000002  The system cannot find the specified file.
0x00000003  The system cannot find the specified path.
0x00000004  The system cannot open the file.
0x00000005  Access denied.
0x00000006  The handle is invalid.
0x00000007  The memory control blocks were destroyed.
0x00000008  Not enough memory available to process this command.
0x00000009  The memory control block address is invalid.
0x0000000A  The environment is incorrect.
0x0000000B  An attempt was made to load a program with an incorrect format.
0x0000000C  The access code is invalid.
0x0000000D  The data is invalid.
0x0000000E  There is not enough disk space to complete this operation.
0x0000000F  The system cannot find the specified drive.
0x00000010  The directory cannot be removed.
0x00000011  The system cannot move the file to another drive.
0x00000012  There are no more files.
0x00000013  The media is write-protected.
0x00000014  The system cannot find the specified device.
0x00000015  The device is not ready.
0x00000016  The device does not recognize the command.
0x00000017  Datenfehler (Cyclic Redundancy Check).
0x00000018  The program issued a command, but the command length is incorrect.
0x00000019  The drive cannot find a specific area or track on the disk.
0x0000001A  The specified hard drive or floppy disk cannot be accessed.
0x0000001B  The drive cannot find the requested sector.
0x0000001C  The printer is out of paper.
0x0000001D  The system cannot write to the specified device.
0x0000001E  The system cannot read from the specified device.
0x0000001F  A device attached to the system is not working.
0x00000020  The process cannot access the file because it is being used by another process.
0x00000021  The process cannot access the file because another process has locked part of the file.
0x00000024  Too many files open to share.
0x00000026  End of file reached.
0x00000027  The disk is full.
0x00000032  The request is not supported.
0x00000033  Windows cannot find the network path. Make sure the network path is correct and the target computer is not busy or powered off. If Windows still cannot find the network path, contact your network administrator.
0x00000034  You were not connected because a duplicate name exists on the network. If you are joining a domain, go to System in Control Panel to change the computer name and try again. If you are joining a workgroup, choose a different workgroup name.
0x00000035  The network path was not found.
0x00000036  The network is busy.
0x00000037  The specified network resource or device is no longer available.
0x00000038  The network BIOS command limit was reached.
0x00000039  A network adapter hardware error has occurred.
0x000003A  The specified server cannot perform the requested operation.
0x0000003B  An unexpected network error occurred.
0x0000003C  The remote adapter is not compatible.
0x0000003D  The print queue is full.
0x0000003E  Disk space to store the file to be printed is not available on the server.
0x0000003F  Your file to print has been deleted.
0x00000040  The specified network name is no longer available.
0x00000041  Network access denied.
0x00000042  The network resource type is incorrect.
0x00000043  The network name cannot be found.
0x000000044  The local computer network adapter card name limit was exceeded.
0x00000045  The network BIOS session limit was exceeded.
0x00000046  The remote server has stopped or is in the process of starting.
0x00000047  No more connections can be made to this remote computer at this time because there are already as many connections as the computer can accept.
0x00000048  The specified printer or disk device has been paused.
0x00000050  The file exists.
0x00000052  The directory or file cannot be created.
0x00000053  Error at INT 24.
0x000000054  Memory is not available to process this request.
0x00000055  The local device name is already in use.
0x00000056  The specified network password is incorrect.
0x00000057  The parameter is incorrect.
0x00000058  A write error occurred on the network.
0x00000059  The system is currently unable to start another process.
0x00000064  Cannot create another system semaphore.
0x00000065  The exclusive semaphore is owned by another process.
0x00000066  The semaphore is set and cannot be closed.
0x00000067  The semaphore cannot be set again.
0x00000068  Unable to request exclusive semaphores at interrupt time.
0x00000069  Previous ownership of this semaphore has ended.
0x0000006B  The program stopped because no alternate disk was inserted.
0x0000006C  The disk is in use by another process or is locked.
0x0000006D  The pipe has ended.
0x0000006E  The system cannot open the specified device or file.
0x0000006F  The file name is too long.
0x00000070  There is not enough space on the hard disk.
0x00000071  No more internal file identifiers available.
0x000000072  The target internal file identifier is incorrect.
0x00000075  The application program's IOCTL call is incorrect.
0x00000076  The parameter value of the "Verify-on-Write" switch is not correct.
0x00000077  The system does not support the requested command.
0x00000078  This feature is not supported on this system.
0x00000079  The semaphore timeout has expired.
0x0000007A  The data area passed to a system call is too small.
0x000007B  The filename, directory name, or volume label syntax is incorrect.
0x0000007C  The system call level is incorrect.
0x0000007D  The volume has no volume label.
0x0000007E  The specified module could not be found.
0x0000007F  The specified procedure could not be found.
0x00000080  There are no child processes to wait for.
0x000000082  Attempt to use a file handle to an open disk partition for an operation other than raw disk I/O.
0x00000083  An attempt was made to move the file pointer before the beginning of the file.
0x00000084  The file pointer cannot be set to the specified device or file.
0x00000085  A JOIN or SUBST command cannot be used on a drive that contains previously joined drives.
0x000000086  An attempt was made to use a JOIN or SUBST command on a drive that is already connected.
0x00000087  An attempt was made to use a JOIN or SUBST command on a drive that has already been replaced.
0x00000088  The system attempted to delete the JOIN of an unconnected drive.
0x00000089  The system attempted to delete the replacement of an unreplaced drive.
0x000008A  The system attempted to map a drive to a directory on a mapped drive.
0x0000008B  The system attempted to replace a drive with a directory on a replaced drive.
0x0000008C  The system attempted to map a drive to a directory on a spare drive.
0x0000008D  The system attempted to SUBST a drive to a directory on a connected drive.
0x0000008E  The system cannot currently perform a JOIN or SUBST.
0x0000008F  The system cannot add or replace a drive to a directory on the same drive.
0x00000090  The directory is not a subdirectory of the root directory.
0x00000091  The directory is not empty.
0x00000092  The specified path will be used as a substitute.
0x000000093  Not enough resources are available to process this command.
0x00000094  The specified path cannot be used at this time.
0x000000095  An attempt was made to join or replace a drive for which a directory on the drive is the target of a previous replacement.
0x000000096  System trace information was not specified in your CONFIG.SYS file or tracing is not allowed.
0x00000097  The number of specified semaphore events for DosMuxSemWait is incorrect.
0x00000098  DosMuxSemWait was not executed; Too many traffic lights have already been set.
0x00000099  The DosMuxSemWait list is incorrect.
0x0000009A  The volume label you entered exceeds the character limit for the target file system label.
0x0000009B  Cannot create another thread.
0x0000009C  The receiver process rejected the signal.
0x0000009D  The segment has already been discarded and cannot be locked.
0x0000009E  The segment is already unlocked.
0x0000009F  The address for the thread ID is incorrect.
0x000000A0  One or more arguments are incorrect.
0x000000A1  The specified path is invalid.
0x000000A2  A signal is already present.
0x000000A4  No more threads can be created in the system.
0x000000A7  A region of a file cannot be locked.
0x000000AA  The requested resource is in use.
0x000000AD  There was no pending lock request for the specified abort area.
0x000000AE  The file system does not support atomic lock type changes.
0x000000B4  The system detected an incorrect segment number.
0x000000B7  Cannot create a file if that file already exists.
0x000000BA  The passed flag is not correct.
0x000000BB  The specified system semaphore name was not found.
0x000000C4  The operating system cannot run this application program.
0x000000C5  The operating system is not currently configured to run this application.
0x000000C7  The operating system cannot run this application program.
0x000000C8  The code segment cannot be greater than or equal to 64 KB.
0x000000CB  The system could not find the environment option entered.
0x000000CD  No process in the command subtree has a signal handler.
0x000000CE  The file name or extension is too long.
0x000000CF  Ring 2's stack is in use.
0x000000D0  The global filename characters, * or ?, were entered incorrectly, or too many global filename characters were specified.
0x000000D1  The signal sent is not correct.
0x000000D2  The signal handler cannot be set.
0x000000D4  The segment is locked and cannot be reallocated.
0x00000D6  Too many dynamic-link modules are attached to this program or dynamic-link module.
0x000000D7  Calls to LoadModule cannot be nested.
0x000000DC  This file is checked out or locked for editing by another user.
0x000000DD  The file must be checked out before saving changes.
0x000000DE  The file type being saved or retrieved was blocked.
0x000000DF  The file size exceeds the allowed limit and cannot be saved.
0x000000E0  Access denied. Before opening files in this location, you must first add the site to your Trusted Sites list, navigate to the site, and select the option to sign in automatically.
0x000000E1  The operation did not complete successfully because the file contains a virus.
0x000000E2  This file contains a virus and cannot be opened. Due to the nature of this virus, the file has been removed from this location.
0x000000E5  The pipe is local.
0x000000E6  The pipe state is invalid.
0x000000E7  All pipe instances are busy.
0x000000E8  The pipe is being closed.
0x000000E9  There is no process on the other end of the pipe.
0x000000EA  More data is available.
0x000000F0  The session was terminated.
0x00000FE  The specified extended attribute name was invalid.
0x000000FF  The extended attributes are inconsistent.
0x000000102  The wait timed out.
0x00000103  No more data is available.
0x0000010A  The copy functions cannot be used.
0x00000010B  The directory name is invalid.
0x000000113  The extended attributes did not fit in the buffer.
0x000000114  The extended attributes file in the mounted file system is corrupt.
0x000000115  The extended attribute table file is full.
0x000000116  The specified extended attribute handle is invalid.
0x00000011A  The mounted file system does not support extended attributes.
0x00000120  Attempt to release mutex not owned by the caller.
0x0000012A  Too many posts were sent to a semaphore.
0x00000012B  Only part of a ReadProcessMemory or WriteProcessMemory request was completed.
0x0000012C  The oplock request is denied.
0x00000012D  An invalid oplock acknowledgment was received from the system.
0x0000012E  The volume is too fragmented to complete this operation.
0x0000012F  The file cannot be opened because it is being deleted.
0x000000130  Shortname settings may not be modifiable on this volume due to global registry setting.
0x000000131  Nicknames are not enabled on this volume.
0x000000132  Please run CHKDSK on the volume.
0x000000133  A requested file lock operation cannot be processed due to an invalid byte range.
0x000000134  The subsystem required to support the image type does not exist.
0x000000135  The specified file already has a notification GUID associated with it.
0x00000013E  The specified range was not found.
0x0000015E  No action was taken because a system restart is required.
0x00000015F  The shutdown operation failed.
0x000000160  The reboot operation failed.
0x000000161  The maximum number of sessions has been reached.
0x000000190  The thread is already in background processing mode.
0x000000191  The thread is not in background processing mode.
0x000000192  The process is already in background processing mode.
0x000000193  The process is not in background processing mode.
0x000001E7  Invalid address attempted to access.
0x000001F4  Unable to load user profile.
0x00000216  Arithmetic result exceeded 32 bits.
0x000000217  There is a process at the other end of the pipe.
0x000000218  Waiting for a process to open the other end of the pipe.
0x00000219  The application scan found an error in the current process.
0x00000021A  An error occurred in the ABIOS subsystem.
0x00000021B  A warning occurred in the WX86 subsystem.
0x00000021C  An error has occurred in the WX86 subsystem.
0x00000021D  An attempt was made to cancel or set a timer that has an associated APC and the thread in question is not the thread that originally set the timer with an associated APC routine.
0x0000021E 542 Unwind exception code.
0x00000021F  An invalid or misaligned stack was encountered during an unload operation.
0x000000220  An invalid unload target was encountered during an unload operation.
0x00000221  Invalid object attributes for NtCreatePort or invalid port attributes for NtConnectPort
0x00000222  The length of the message passed to NtRequestPort or NtRequestWaitReplyPort was longer than the maximum message allowed by the port.
0x00000223  An attempt was made to lower a quota limit below the current usage.
0x000000224  An attempt was made to connect to a device that was already connected to another device.
0x000000225  An attempt was made to execute an instruction at an unaligned address and the host system does not support unaligned command references.
0x00000226  Profile creation not started.
0x00000227  Profiling was not stopped.
0x00000228  The ACL passed did not contain the minimum required information.
0x00000229  The number of active profiling objects is maximum and no more may be started.
0x0000022A  Used to indicate that an operation cannot proceed without blocking I/O.
0x0000022B  Indicates that a thread attempted to terminate itself by default (called NtTerminateThread with NULL) and that it was the last thread in the current process.
0x0000022C  In this case, information is lost, but the filter handles the exception correctly.
0x0000022D  In this case, information is lost, but the filter handles the exception correctly.
0x0000022E  In this case, information is lost, but the filter handles the exception correctly.
0x00000022F  A faulty function table was detected during an unloading process.
0x000000230  This causes the protection attempt to fail, which can cause a file creation attempt to fail.
0x000000231  Indicates that an attempt was made to enlarge an LDT by setting its size, or that the size was not an even number of selectors.
0x000000233  Indicates that the starting value for the LDT information was not an integer multiple of the selector size.
0x000000234  Indicates that the user specified an invalid descriptor when attempting to set up ldt descriptors.
0x000000235  Indicates that a process has too many threads to perform the requested action. For example, the assignment of a primary token can only be done when a process is null or has one thread.
0x00000236  An attempt was made to edit a thread within a specific process, but the specified thread is not in the specified process.
0x00000237  Paging file quota exceeded.
0x00000238  The Netlogon service cannot start because another Netlogon service running in the domain conflicts with the specified role.
0x000000239  The SAM database on a Windows server is significantly out of sync with the copy on the domain controller. Full synchronization is required.
0x00000023A  The NtCreateFile API failed. This error should never be returned to an application, it is a placeholder for the Windows Lan Manager Redirector to use in its internal error mapping routines.
0x00000023B  The I/O permissions for the process could not be changed.
0x0000023C 572 The application was terminated as a result of CTRL+C.
0x00000023D  The required system file hs is corrupt or missing.
0x0000023E  The exception s (0x
0x00000023F  The application failed to start correctly (0xlx). Click OK to close the application.
0x000000240  Failed to create paging file hs (lx). The requested size was ld.
0x00000241  Windows cannot verify the digital signature for this file. A recent hardware or software change may have installed a file that is incorrectly signed, corrupted, or may be malicious software from an unknown source.
0x00000242  No paging file was specified in the system configuration.
0x00000243  A real-mode application issued a floating-point instruction and floating-point hardware is not present.
0x00000244  An event pair synchronization operation was performed using the thread-specific client/server event pair object, but no event pair object was associated with the thread.
0x00000245  A Windows server has an incorrect configuration.
0x000000246  Invalid character found. For a multibyte character set, this includes a lead byte with no trailing byte. For the Unicode character set, this includes the characters 0xFFFF and 0xFFFE.
0x000000247  The Unicode character is not defined in the Unicode character set installed on the system.
0x00000248  The paging file cannot be created on a floppy disk.
0x00000249  The system BIOS could not map a system interrupt to the device or bus to which the device is connected.
0x00000024A  This operation is only allowed on the domain's primary domain controller.
0x0000024B  An attempt was made to acquire a mutant in a way that exceeded its maximum number.
0x00000024C  A volume was accessed that requires a file system driver that has not yet been loaded.
0x0000024D 589 It is corrupt, missing, or not writable.
0x00000024E  An unexpected error occurred while processing a DebugActiveProcess API request. You can choose OK to exit or Cancel to ignore the error.
0x0000024F 591 The hs system process terminated unexpectedly with status 0x
0x000000250  The TDI client could not process the data received during a display.
0x00000251 593 NTVDM encountered a fatal error.
0x00000252  The driver could not complete a canceled I/O request in the allotted time.
0x00000253  An attempt was made to reply to an LPC message, but the thread identified by the client ID in the message was not waiting for this message.
0x000000254  This error can be caused by a fault in your computer hardware or network connection. Please try saving this file somewhere else.
0x00000255  The parameters passed to the server in the Client/Server Shared Memory window were invalid. Too much data may have been placed in the shared memory window.
0x00000256  The stream is not a tiny stream.
0x00000257  The request needs to be processed by the stack overflow code.
0x00000258  OFS internal status codes indicating how a mapping operation is handled. Either it tries again after moving the containing onode, or the extent stream is converted to one large stream.
0x00000259  An attempt to find the object found an object matching the ID on the volume, but it is out of the scope of the handle used for the operation.
0x0000025A 602 The bucket array needs to be expanded. Then try the transaction again.
0x00000025B  The user/kernel marshaling buffer overflowed.
0x0000025C 604 The variant structure supplied contains invalid data.
0x00000025D  The specified buffer contains malformed data.
0x00000025E  An attempt to generate a security audit failed.
0x0000025F  The timer resolution was not previously set by the current process.
0x00000260  There is not enough account information to log you in.
0x000000261  The entry point should be declared as WINAPI or STDCALL. Select YES to fail loading the DLL. Select NO to continue execution. Selecting NO may result in the application not functioning properly.
0x000000262  The callback entry point should be declared as WINAPI or STDCALL. If you select OK, the service will continue. However, the service process may not function properly.
0x000000263  There is an IP address conflict with another system on the network
0x000000264  There is an IP address conflict with another system on the network
0x000000265  The system has reached the maximum size allowed for the system part of the registry. Additional memory requests are ignored.
0x000000266  A callback return system service cannot be executed if no callback is active.
0x00000267  Please choose a longer password.
0x00000268  If you think your password has been compromised, please contact your administrator immediately to have a new password assigned.
0x000000269  Your user account policy does not allow this. Please choose a password that you have not used before.
0x00000026A  The specified compression format is not supported.
0x00000026B  The specified hardware profile configuration is invalid.
0x00000026C  The specified Plug and Play registration device path is invalid.
0x00000026D  The specified quota list does not match its descriptor internally.
0x00000026E  The evaluation period for this installation of Windows has expired. This system will shut down in 1 hour. To restore access to this installation of Windows, please update this installation with a licensed distribution of this product.
0x0000026F 623 The move occurred because the DLL hs occupied an address space reserved for Windows system DLLs. For a new DLL, contact the vendor who provides the DLL.
0x00000270  The application could not be initialized because the window station is shutting down.
0x000000271  The validation process must proceed to the next step.
0x000000272  There are no more matches for the current index enumeration.
0x00000273  The space could not be added to the space list due to a conflict.
0x000000274  The server process is running under a different SID than the one required by the client.
0x00000275  A group marked as use only for denial cannot be activated.
0x00000276  Multiple floating point errors.
0x00000277  Multiple floating point traps.
0x00000278  The requested interface is not supported.
0x000000279  The hs driver does not support standby mode. Updating this driver may cause the system to go into sleep mode.
0x000000027B  During this process, memory requests for some applications may be denied. For more information, see Help.
0x00000027C  A device has been removed, so the enumeration must be restarted.
0x0000027D 637 The system has shut down.
0x0000027E  Device will not boot without reboot.
0x0000027F 639 There is insufficient power to complete the requested operation.
0x00000280 640 ERROR_MULTIPLE_FAULT_VIOLATION
0x00000281  The system is in the process of shutting down.
0x00000282  An attempt was made to remove the DebugPort of a process, but no port was assigned to the process yet.
0x000000283  This version of Windows is incompatible with the behavior version of directory forest, domain, or domain controller.
0x000000284  The specified scope could not be found in the scope list.
0x00000286  The driver was not loaded because the system boots in safe mode.
0x00000287  The driver was not loaded because the initialization call failed.
0x000000288  This can be caused by a hardware failure or a bad connection.
0x00000289  The create operation failed because the name contained one or more mount points that resolve to a volume to which the specified device object is not mounted.
0x00000028A  The device object parameter is either not a valid device object or is not mounted on the volume specified by the filename.
0x0000028B 651 A machine check error has occurred. See the system event log for more information.
0x0000028D 653 The system tree size has exceeded its limit.
0x00000028E  The driver could not be loaded because a previous version of the driver is still in memory.
0x000000028F  Please wait while Volume Shadow Copy Service prepares volume hs for hibernation.
0x000000290  The system could not be hibernated (the error code is hs). Hibernation will be disabled until the system is rebooted.
0x00000299  The requested operation could not be completed due to a file system limitation
0x0000029C 668 An assertion failure has occurred.
0x00000029D  An error occurred in the ACPI subsystem.
$00029E 670 WOW-Assertionsfehler.
0x0000029F  Contact your system vendor for a system BIOS update.
0x000002A0  A translator could not translate resources.
0x000002A1  An IRQ translator could not translate resources.
0x000002A3  The system debugger was woken up by an interrupt.
0x000002A4  Handles to objects were automatically closed as a result of the requested operation.
0x00002A5  The specified access control list (ACL) contained more information than expected.
0x000002A6 678 The commit was NOT completed, but neither was it rolled back (so it can still be committed if desired).
0x00002A7  The medium may have changed.
0x000002A8  A surrogate prefix was used that does not compromise system security. However, this may provide more restrictive access than intended.
0x000002A9 681 The build process stopped after a symbolic link was reached
0x000002AA  A long jump was performed.
0x000002AB  The Plug and Play query operation was unsuccessful.
0x000002AC 684 A frame consolidation was performed.
0x000002AD  was corrupted and recovered. Some data may have been lost.
0x000002AE  The application is attempting to run executable code from the hs module. This can be unsafe. An alternative, hs, is available. Should the application use the hs secure module?
0x000002AF  The application loads executable code from the hs module. This is safe but may not be compatible with previous versions of the operating system. An alternative, hs, is available. Should the application use the hs secure module?
0x000002B0 688 Debugger did not handle the exception.
0x000002B1  Debugger responds later.
0x000002B2  Debugger cannot provide handle.
$0002B3 691 Debugger beendete Thread.
0x000002B4  Debugger terminated process.
0x000002B5  Debugger got control C.
0x000002B6 694 Debugger printed an exception on Control C.
0x000002B7  Debugger caught RIP exception.
0x000002B8  The debugger received a control interrupt.
0x000002B9  Debugger command communication exception.
0x000002BA  An attempt was made to create an object and the object name already existed.
0x000002BB  A thread termination occurred while the thread was suspended. Thread resumed and termination continued.
0x000002BC  An image file could not be mapped to the address specified in the image file. Local corrections must be made to this image.
0x000002BD  This information level status indicates that a particular transaction status of a registry subtree did not yet exist and needed to be created.
0x000002BE  An exception is thrown to allow a debugger to load, unload, or trace symbols and breakpoints within these 16-bit segments.
0x000002BF  Choose OK to set the current directory to hs or choose CANCEL to exit.
0x0000002C0  This happened because the file system encountered a failure on a member of the fault tolerant volume but was unable to reallocate the failed portion of the device.
0x000002C1  This happened because the file system encountered an error on a member of the fault tolerant volume, but was unable to reallocate the failed portion of the device.
0x000002C2  The image file hs is valid, but for a different machine type than the current machine. Select OK to continue or CANCEL to have the DLL loading fail.
0x000002C3  The network transport returned partial data to its client. The rest of the data will be sent later.
0x000002C4  The network transport returned data to its client that the remote system marked as expedited.
0x000002C5  The network transport returned partial data to its client and this data was marked as expedited by the remote system. The rest of the data will be sent later.
0x000002C6 710 The TDI display completed successfully.
0x000002C7 711 The TDI display has entered the waiting state.
0x000002C8  Checking the file system for wZ
0x000002C9  Std
0x000002CA  The specified registry key is referenced by a predefined handle.
0x000002CB  The page protection of a locked page was changed to No Access and the page was unlocked from memory and the process.
0x000002CC  Std
0x000002CD  One of the pages to be blocked was already blocked.
0x000002CF  ERROR_ALREADY_WIN32
0x000002D0 720 The hs image file is valid, but for a different machine type than the current machine.
0x000002D1  A yield execution was performed and no thread was available to execute.
0x000002D2  The continue flag for a timer API was ignored.
0x000002D3 723 The arbiter has deferred arbitration of these resources to its parent
0x000002D4  The inserted CardBus device cannot start due to a configuration error on 'hs'.
0x000002D5 725 The CPUs in this multiprocessor system do not all have the same revision level. In order to use all processors, the operating system is limited to the properties of the least powerful processor in the system. If you experience problems with this system, contact the CPU manufacturer to see if this mix of processors is supported.
0x000002D6  The system has hibernated.
0x000002D7 727 The system resumed from hibernation.
0x000002D9  A device driver leaks locked I/O pages, causing the system to be compromised. The system automatically activated a tracking code to try to catch the culprit.
0x000002DA  The system woke up
0x000002DB  ERROR_WAIT_1
0x000002DC  ERROR_WAIT_2
0x000002DD  ERROR_WAIT_3
0x000002DE  ERROR_WAIT_63
0x000002DF  ERROR_ABANDONED_WAIT_0
0x000002E0  ERROR_ABANDONED_WAIT_63
0x000002E1  ERROR_USER_APC
0x000002E2  ERROR_KERNEL_APC
0x000002E3  ERROR_ALERTED
0x000002E4 740 The requested operation requires an increase.
0x000002E5  An analysis should be performed by the object manager because the name of the file resulted in a symbolic link.
0x000002E6 742 An open/create operation completed while an oplock break is in progress.
0x000002E7  A new volume was mounted from a file system.
0x000002E8  The commit has now completed.
0x000002E9  This indicates that a change notification request was completed because the handle that made the change notification request was closed.
0x000002EA  The computer WAS able to connect over a secondary transport.
0x000002EB 747 Page fault was a transition error.
0x000002EC 748 Page fault was a request null error.
0x000002ED 749 Page fault was a request null error.
0x000002EE 750 Page fault was a request null error.
0x000002EF 751 page fault was fixed by reading from a secondary storage device.
0x000002F0 752 The cached page was locked during operation.
0x000002F1  Crash dump exists in paging file.
0x000002F2  The specified buffer contains all zeros.
0x000002F3  An analysis should be performed by the object manager because the name of the file led to a symbolic link.
0x000002F4  The device successfully completed a poll stop and its resource requirements have changed.
0x000002F5 757 The translator has translated these resources into global space and no further translations should be performed.
0x000002F6  A process that is terminating has no threads to terminate.
0x00002F7  The specified process is not part of a job.
0x000002F8 760 The specified process is part of a job.
0x000002F9  The system is now ready to hibernate.
0x000002FA  A file system or file system filter driver successfully completed an FsFilter operation.
0x000002FB  The specified interrupt vector has already been connected.
0x000002FC  The specified interrupt vector is still connected.
0x000002FD  An operation is blocked waiting for an oplock.
0x000002FE  Exception handled by the debugger
0x000002FF Debugger continued
0x000000300  A user-mode callback encountered an exception and the kernel callback frame should be removed.
0x00000301  Compression is disabled for this volume.
0x00000302  The data provider cannot reverse fetch a result set.
0x000000303  The data provider cannot scroll backward through a result set.
0x000000304  The data provider requires that previously retrieved data be released before requesting more data.
0x00000305  The data provider could not interpret the flags set for a column binding in an accessor.
0x00000306  One or more errors occurred while processing the request.
0x00000307  The implementation cannot complete the request.
0x00000308  A component's client requested an operation that is not valid given the state of the component instance.
0x00000309  A version number could not be parsed.
0x00000030A  The start position of the iterator is invalid.
0x00000030B  The hardware reported an uncorrectable memory error.
0x0000030C 780 The attempted operation required self-healing to be enabled.
0x00000030D  The desktop heap encountered an error allocating session memory. See the system event log for more information.
0x00000310  A thread is dispatched for MCA with MCA EXCEPTION.
0x00000313  A valid hibernation file has been invalidated and should be abandoned.
0x000000314  This error can be caused by problems with the network connection. Please try saving this file somewhere else.
0x000000315  This error was returned from the server where the file resides. Please try saving this file somewhere else.
0x000000316  This error can be caused if the device has been removed or the media is write-protected.
0x00000317  The resources required for this device conflict with the MCFG table.
0x000000320  The oplock that was associated with this handle is now associated with a different handle.
0x00000321  An oplock of the requested level cannot be granted. A lower level oplock may be available.
0x00000322  The operation did not complete successfully because it would cause an oplock to be broken. The caller has requested that existing oplocks not be broken.
0x00000323  The handle associated with this oplock has been closed. The oplock is broken now.
0x00000324  The specified access control entry (ACE) does not contain a condition.
0x00000325  The specified access control entry (ACE) contains an invalid condition.
0x000003E2  Access to the extended attribute was denied.
0x000003E3 995 The I/O operation was aborted due to a thread exit or an application request.
0x000003E4 996 Overlapped I/O event is not in a signaled state.
0x000003E5  Overlapped I/O operation in progress.
0x000003E6  Invalid access to memory location.
0x000003E7  Error executing swap-in operation.
0x000003E9  recursion too deep; the stack has overflowed.
0x000003EA  The window cannot respond to the sent message.
0x000003EB  This function cannot be completed.
0x000003EC  Invalid flags.
0x000003ED  Ensure that all required file system drivers are loaded and that the volume is not corrupt.
0x000003EE  The volume for a file was changed externally, making the open file no longer valid.
0x000003EF 1007 The requested operation cannot be performed in full screen mode.
0x000003F0 1008 An attempt was made to reference a token that does not exist.
0x000003F1  The configuration registry database is corrupt.
0x00003F2  The configuration registry key is invalid.
0x00003F3  The configuration registry key could not be opened.
0x00003F4  The configuration registry key could not be read.
0x00003F5  The configuration registry key could not be written.
0x000003F6  One of the files in the registry needed to be restored using a log or alternate copy. The restore was successful.
0x000003F7 1015 The registry is corrupt. The structure of one of the registry data files is corrupted, or the system memory dump of the file is corrupted, or the file could not be restored because the alternate copy or log was missing or corrupted.
0x000003F8 1016 A registry-initiated I/O operation failed unrecoverable. The registry could not read, write, or delete one of the files that contain the system image of the registry.
0x000003F9  The system attempted to load or restore a file to the registry, but the specified file is not in a registry file format.
0x000003FA  Illegal operation attempted on a registry key that has been marked for deletion.
0x000003FB  The system could not allocate required space in a registry log.
0x000003FC  Cannot create a symbolic link in a registry key that already contains subkeys or values.
0x000003FD  Unable to create a stable subkey under an ephemeral parent key.
0x000003FE  A change notification request is completing and the information is not returned in the caller's buffer. The caller now has to enumerate the files to find the changes.
0x00000041B  A stop control was sent to a service on which other running services depend.
0x00000041C  The requested control is not valid for this service.
0x00000041D  The service did not respond to the start or control request in a timely manner.
0x00000041E  A thread could not be created for the service.
0x0000041F 1055 The service database is locked.
0x00000420  An instance of the service is already running.
0x00000421  The account name is invalid or does not exist, or the password for the specified account name is invalid.
0x00000422  The service cannot be started, either because it is disabled or because it has no enabled devices associated with it.
0x00000423  Circular service dependency was specified.
0x00000424  The specified service does not exist as an installed service.
0x000000425  The service cannot accept control messages at this time.
0x000000426  The service did not start.
0x00000427  The service process could not connect to the service controller.
0x00000428  The service encountered an exception while processing the control request.
0x000000429  The specified database does not exist.
0x0000042A 1066 The service returned a service-specific error code.
0x00000042B  The process terminated unexpectedly.
0x00000042C  The dependency service or dependency group failed to start.
0x00000042D  The service failed to start due to a logon error.
0x0000042E 1070 After starting, the service was stuck in a pending start state.
0x00000042F  The specified service database lock is invalid.
0x000000430  The specified service has been marked for deletion.
0x00000431  The specified service already exists.
0x000000432  The system is currently running with the last known good configuration.
0x000000433  The dependency service does not exist or has been marked for deletion.
0x000000434  The current boot has already been accepted for use as the last known good control record.
0x000000435  No attempts have been made to start the service since the last boot.
0x000000436  The name is already in use as either a service name or a service display name.
0x000000437  The account specified for this service is different from the account specified for other services running in the same process.
0x000000438 1080 Error actions can only be set for Win32 services, not for drivers.
0x000000439  As a result, the Service Control Manager cannot take any action if this service's process exits unexpectedly.
0x00000043A  No recovery program has been configured for this service.
0x00000043B  The executable program for which this service is configured does not implement the service.
0x00000043C  This service cannot start in safe mode
0x0000044C  The physical end of the tape has been reached.
0x0000044D 1101 A tape access reached a filemark.
0x0000044E 1102 The beginning of the tape or a partition was found.
0x0000044F 1103 A tape access has reached the end of a series of files.
0x00000450 1104 There is no more data on the tape.
0x000000451  Tape could not be partitioned.
0x00000452  When accessing a new tape of a multivolume partition, the current block size is incorrect.
0x000000453  Unable to find tape partition information when loading a tape.
0x000000454  The media ejection mechanism cannot be locked.
0x000000455  The medium cannot be unloaded.
0x000000456  The media in the drive may have changed.
0x000000457  The I/O bus was reset.
0x00000458  No media in drive.
0x000000459  There is no mapping for the Unicode character in the target multibyte code page.
0x00000045A  A dynamic link library (DLL) initialization routine failed.
0x0000045B 1115 A system shutdown is in progress.
0x0000045C 1116 The system shutdown cannot be canceled because no shutdown was in progress.
0x00000045D  The request could not be completed due to an I/O device error.
0x00000045E  No serial device initialized successfully. The serial driver is unloaded.
0x00000045F  A device that shared an interrupt request (IRQ) with other devices could not be opened. At least one other device using this IRQ has already been opened.
0x00000460  (The IOCTL_SERIAL_XOFF_COUNTER has reached zero.)
0x00000461  (The IOCTL_SERIAL_XOFF_COUNTER did not reach zero.)
0x000000462  No ID address tag was found on the floppy disk.
0x000000463  Mismatch between the disk sector ID field and the disk controller track address.
0x00000464  The floppy disk controller reported an error that is not recognized by the floppy disk driver.
0x000000465  The floppy disk controller returned inconsistent results in its registers.
0x000000466  When attempting to access the hard drive, a recalibration failed, even after repeated attempts.
0x00000467  When accessing the hard disk, a disk operation failed even after retries.
0x000000468  Accessing the hard drive required a hard drive controller reset, but even that failed.
0x00000469  Physical end of tape detected.
0x00000046A 1130] Not enough server memory is available to process this command.
0x0000046B 1131 A potential deadlock condition was detected.
0x00000046C  The specified base address or file offset is not in the correct alignment.
0x00000474  An attempt to change the system power state was rejected by another application or driver.
0x000000475  The system BIOS failed when attempting to change the system power state.
0x000000476  An attempt was made to create more links for a file than the file system supports.
0x00000047E  The specified program requires a newer version of Windows.
0x00000047F  The specified program is not a Windows or MS-DOS program.
0x000000480  Cannot start more than one instance of the specified program.
0x00000481  The specified program was written for an earlier version of Windows.
0x000000482  One of the library files required to run this application is corrupt.
0x00000483  The specified file does not have an associated application for this operation.
0x00000484  An error occurred while sending the command to the application.
0x00000485  One of the library files required to run this application cannot be found.
0x000000486  The current process has consumed all the system-allowed handles to Window Manager objects.
0x00000487 1159 The message can only be used with synchronous operations.
0x000000488  The specified source item has no media.
0x000000489  The specified target item already contains media.
0x0000048A  The specified item does not exist.
0x0000048B  The specified item is part of a magazine that does not exist.
0x00000048C  The specified device needs to be reinitialized due to hardware errors.
0x0000048D 1165 The device indicated that cleaning is required before further operations are attempted.
0x0000048E  The device indicated that its door is open.
0x0000048F  The device is not connected.
0x00000490  Item not found.
0x000000491  There was no match for the specified key in the index.
0x00000492  The specified property set does not exist on the object.
0x00000493  The point passed to GetMouseMovePoints is not in the buffer.
0x00000494  The tracking service (workstation) is not running.
0x00000495  The volume ID could not be found.
0x000000497  The file to be replaced could not be removed.
0x000000498  The replacement file could not be moved to the file to be replaced. The file to be replaced kept its original name.
0x000000499  The replacement file could not be moved to the file to be replaced. The file to be replaced has been renamed with the backup name.
0x000000049A  Clearing volume change journal.
0x000000049B  The volume change journal is not active.
0x000000049C  A file was found, but it may not be the correct file.
0x00000049D  The journal entry was deleted from the journal.
0x000004A6 1190 A system shutdown has already been scheduled.
0x000004A7  The system shutdown cannot be initiated because other users are logged on to the computer.
0x000004B0  The specified device name is invalid.
0x000004B1 1201 The device is not currently connected, but it is a saved connection.
0x000004B2  The local device name has a saved connection to another network resource.
0x000004B3  The network path was either entered incorrectly, does not exist, or the network provider is not currently available. Please try entering the path again or contact your network administrator.
0x00004B4  The specified network provider name is invalid.
0x000004B5  The network connection profile could not be opened.
0x000004B6  The network connection profile is corrupt.
0x00004B7  Cannot list a non-container.
0x000004B8  An extended error has occurred.
0x00004B9  The format of the specified group name is invalid.
0x000004BA  The format of the specified computer name is invalid.
0x000004BB  The format of the specified event name is invalid.
0x000004BC  The format of the specified domain name is invalid.
0x000004BD  The format of the specified service name is invalid.
0x000004BE  The format of the specified network name is invalid.
0x000004BF  The format of the specified share name is invalid.
0x000004C0  The format of the specified password is invalid.
0x00004C1  The format of the specified message name is invalid.
0x00004C2  The format of the specified message destination is invalid.
0x000004C3  Multiple connections to a server or shared resource by the same user with more than one username are not allowed. Disconnect any previous connections to the server or shared resource and try again.
0x000004C4  An attempt was made to establish a session with a network server, but too many sessions have already been established with this server.
0x00004C5  The workgroup or domain name is already in use by another computer on the network.
0x000004C6 1222 The network does not exist or is not started.
0x000004C7 1223 The operation was canceled by the user.
0x00004C8  The requested operation cannot be performed on a file that has a user-assigned section open.
0x00004C9  The remote computer refused the network connection.
0x000004CA  The network connection was closed properly.
0x000004CB  An address is already assigned to the network transport endpoint.
0x000004CC 1228 The network endpoint has not yet been assigned an address.
0x000004CD 1229 An attempt was made to perform an operation with a nonexistent network connection.
0x000004CE 1230 An illegal operation was attempted with an active network connection.
0x000004CF  The network location cannot be reached. For network troubleshooting information, see Windows Help.
0x000004D0 1232 The network location cannot be reached. For network troubleshooting information, see Windows Help.
0x00004D1  The network location cannot be reached. For network troubleshooting information, see Windows Help.
0x00004D2  There is no service running on the target network endpoint on the remote system.
0x000004D3  The request was aborted.
0x000004D4 1236 The network connection was terminated by the local system.
0x00004D5  The operation could not be completed. A repeat attempt should be made.
0x00004D6  A connection to the server could not be established because the limit on the number of concurrent connections for this account has been reached.
0x00004D7  Attempt to log in to this account at an unauthorized time of day.
0x000004D8  The account does not have permission to log in from this station.
0x00004D9  The network address could not be used for the requested operation.
0x000004DA  The service is already registered.
0x000004DB  The specified service does not exist.
0x000004DC  The requested operation was not performed because the user was not authenticated.
0x000004DD  The requested operation was not performed because the user was not logged on to the network. The specified service does not exist.
0x000004DE  Continue work in progress.
0x000004DF  An attempt was made to perform an initialization operation when the initialization has already been completed.
0x000004E0 1248 No more local devices.
0x00004E1  The specified site does not exist.
0x00004E2  A domain controller with the specified name already exists.
0x000004E3  This operation is only supported when you are connected to the server.
0x000004E4  The Group Policy framework should call the extension even if no changes were made.
0x000004E5  The specified user does not have a valid profile.
0x000004E6  This operation is not supported on a computer running Windows Server 2003 for Small Business Server
0x000004E7  The server computer is shutting down.
0x000004E8  The remote system is not available. For network troubleshooting information, see Windows Help.
0x00004E9  The security identifier provided is not from an account domain.
0x000004EA  The security ID provided does not have a domain component.
0x000004EB 1259 The AppHelp dialog was canceled, which prevented the application from starting.
0x000004EC  This program is blocked by Group Policy. Receive further information from your system administrator.
0x000004ED 1261 A program is trying to use an invalid register value. Usually caused by an uninitialized register. This error is Itanium specific.
0x000004EE 1262 The share is currently offline or does not exist.
0x000004EF  The Kerberos protocol encountered an error while validating the KDC certificate during smart card logon. See the system event log for more information.
0x000004F0  The Kerberos protocol encountered an error while attempting to use the smart card subsystem.
0x000004F1  The system has detected a possible attempt to compromise security. Please make sure you can contact the server that authenticated you.
0x000004F7  The machine is locked and cannot be shut down without the force option.
0x00004F9  An application-defined callback returned invalid data when called.
0x000004FA  The Group Policy framework should call the extension in the foreground synchronous policy update.
0x000004FB  Loading of this driver was blocked
0x000004FC  A dynamic-link library (DLL) referenced a module that was neither a DLL nor the executable image of the process.
0x000004FD  Windows cannot open this program because it has been disabled.
0x000004FE  Windows cannot open this program because the license enforcement system has been tampered with or corrupted.
0x000004FF 1279 A transaction recovery failed.
0x00000500 1280 The current thread has already been converted to a fiber.
0x00000BC3  The requested operation was successful. Changes will not take effect until the service is restarted.
0x00000BC4  No printers were found.
0x00000BC5  The printer driver is known to be unreliable.
0x00000BC6  The printer driver is known to corrupt the system.
0x00000BC7  The specified printer driver package is currently in use.
0x00000BC8  Unable to find a core driver package required by the printer driver package.
0x00000BC9  The requested operation failed. A system restart is required to undo any changes made.
0x00000BCA 3018 The requested operation failed. A system reboot was initiated to undo the changes made.
0x00000BCB  The specified printer driver was not found on the system and needs to be downloaded.
0x00000BCC  The requested print job could not be printed. A printing system update requires the job to be resubmitted.
0x00000BCD  Power was restored at ***. The server is no longer stopped.
0x00000BCE  The UPS service will shut down at *** due to low battery.
0x00000BCF  Shutdown command file. The UPS service started anyway.
0x00000BD1 3025 The hotfix occurred while processing a remote request.
0x00000BD2  The error occurred while processing a remote request.
0x00000BD3  Any updates made to the database after this time will be lost.
0x00000BD4  Any updates made to the database after this time will be lost.
0x00000BD5  THE SYSTEM IS NOT SECURE.
0x00000BD6  It is exported from another server.
0x00000BD7  on *** due to error ***.
0x00000BD8  time.
0x00000BD9  User *** has exceeded account limit *** on server ***.
0x00000BDA  The primary domain controller for domain *** failed.
0x00000BDB  domain ***.
0x00000BDC  The replicator attempted to login to *** as *** and failed.
0x00000BDD  @I *LOGON DURING
0x00000BDE  on *** due to system error ***.
0x00000BDF 3039 Replicator limit for files in a directory has been exceeded.
0x00000BE0 3040 Tree depth replicator limit exceeded.
0x00000BE1  and is the current directory for some processes.
0x00000BE2  Network error *** occurred.
0x00000BE5  System error *** occurred.
0x00000BE6  is set to NO.
0x00000BE7  IMPORT path *** cannot be found.
0x00000BE8  EXPORT path *** cannot be found.
0x00000BE9  Replicated data changed in directory ***.
0x00000BEA  *** Systemfehler.
0x00000BEB  Value for "***".
0x00000BEC line or in the configuration file.
0x00000BED  LAN Manager does not recognize "***" as a valid option.
0x00000BEE  A resource request could not be satisfied.
0x00000BEF  There is a problem with the system configuration.
0x00000BF0  A system error has occurred.
0x00000BF1  An internal consistency error has occurred.
0x00000BF2  The configuration file or command line contains an ambiguous option.
0x00000BF3  The configuration file or command line has a duplicate parameter.
0x00000BF4  the DosKillProc function.
0x00000BF5  An error occurred while attempting to run the service program.
0x00000BF6 3062 The subservice could not be started.
0x00000BF7  There is a conflict in the value or usage of these options: ***.
0x00000BF8  There is a problem with the file.
0x00000BFE  Memory
0x00000BFF  disk space
0x00000C00  Thread
0x00000C01  Process
0x000000C02  Security error.
0x000000C03  Bad or missing LAN Manager root directory.
0x000000C04  The network software is not installed.
0x00000C05  The server did not start.
0x00000C06  The server cannot access the user accounts database (NET.ACC).
0x00000C07  Incompatible files were installed in the LANMAN structure.
0x00000C08  The LANMAN\LOGS directory is invalid.
0x00000C09  The specified domain could not be used.
0x00000C0A  The computer name is being used as a message alias on another computer.
0x00000C0B  Failed to announce server name.
0x000000C0C  The user accounts database is not configured correctly.
0x00000C0D 3085 The server is not running with user-level security.
0x00000C0F 3087 The workstation is not configured correctly.
0x00000C10  See error log for details.
0x000000C11  Cannot write to this file.
0x00000C12  and reapply all ADDPAKs.
0x000000C13  The LM386 server cannot start because CACHE.EXE is not running.
0x00000C14  There is no account for this computer in the security database.
0x00000C15  This computer is not a member of the SERVER group.
0x000000C16  The SERVER group does not exist in the local security database.
0x00000C17  Configuration.
0x000000C18  The primary domain controller for this domain could not be found.
0x00000C19  NET HELP LOCALGROUP describes the options for this command.
0x00000C1A  The service failed to authenticate with the primary domain controller.
0x00000C1B  There is a problem with the security database creation date or serial number.
0x00000C1C 3100 The operation failed because a network software error occurred.
0x00000C1D  [\\Computername] [/DELETE] [/LIST]
0x00000C1E  Segment for network control blocks (NCBs). The error code is the data.
0x00000C1F  Segment for network control blocks (NCBs). The error code is the data.
0x00000C20  sharename \\computername /DELETE
0x000000C22  An unexpected network control block (NCB) was received. The NCB is the data.
0x00000C23  The network did not start.
0x00000C24  WORD ioctl or fsctl number
0x00000C25  This command has no options.
$0000C26 3110 NET START CLIPBOOK
0x00000C27  The error code is the data.
0x000000C28  The SMB is the data.
0x00000C29 3113 NET START EVENT LOG
0x00000C2A  Overflow.
0x00000C30  as line buffer are dimensioned in such a way that too much memory is required.
0x000000C31  The server cannot increase the size of a memory segment.
$0000C32 3122 NET RPCLOCATOR STARTEN
0x00000C34  Parameters must be zero or all three must be non-zero.
$0000C35 3125 NET START RPCSS
0x00000C37  This command has no options.
$0000C38 3128 NET START TIME SCHEDULE
0x00000C39  is corrupted.
0x00000C3A 3130 NetIMakeLM filename. The error code is the data.
0x00000C3B 3131 NET-START-SERVER
0x00000C3C  Check the swap disk free space and reboot the system to start the server.
0x00000C44  in raw data.
0x00000C45 3141 Message server shared data segment.
0x00000C4F  The error code is the data.
0x00000C50 3152 An invalid server message block (SMB) was received. The SMB is the data.
0x00000C58  The size follows in DWORD format:
0x000000C59  The workstation could not get the computer name number.
0x00000C5A  The error code is the data.
0x00000C5B  The error code is the data.
0x00000C5C 3164 The workstation host table is full.
0x00000C5D 3165 An invalid mailslot server message block (SMB) was received. The SMB is the data.
0x00000C5E  The error code is the data.
0x00000C5F  The function code and error codes are the data.
0x00000C62  Alert recipient. The error code is ***.
0x00000C63  Splitting the group into two or more smaller groups.
0x00000C64  Different types of names used by Windows. It's not a NET command.
0x000000C65  For more information about tools, see the command line reference in the online help.
0x000000C66  The server could not read the AT schedule file.
0x000000C67  The server found an invalid AT schedule entry.
0x000000C68  The server could not find an AT schedule file, so it created one.
0x000000C69  The server could not access the *** network using NetBiosOpen.
0x00000C6A 3178 The AT command processor could not run ***.
0x00000C6C  contains some corrupted data. The cache is stopped.
0x00000C6D 3181 The hotfix occurred while processing a remote request.
0x00000C6E  The error occurred while processing a remote request.
0x00000C6F 3183 Any updates made to the database after this time will be lost.
0x000000C70  Any updates made to the database after this time will be lost.
0x00000C71  THE SYSTEM IS NOT SECURE.
0x00000C72  THE SYSTEM IS NOT SECURE.
0x00000C76  ***
0x000000C77  The redirector ran out of resources: ***.
0x000000C78  The SMB header is the data.
0x00000C79  The command and return code of the network control block (NCB) is the data.
0x00000C7A  Hang up a stuck session on ***.
0x00000C7B 3195 The NCB is the data.
0x00000C7C  Data may have been lost.
0x00000C7D 3197 The NCB is the data.
0x00000C7E as the maximum. The maximum amount has been allocated.
0x000000C84  The THREADS parameter in the CONFIG.SYS file should be increased.
0x00000C85  The file is probably corrupt.
0x00000C86  and is the current directory for some processes.
0x00000C87 3207 It was exported from another server.
0x00000C88  on *** due to error ***.
0x00000C89  time.
0x00000C8A  Administrator.
0x00000C8B 3211 The replicator tried to login to *** as *** and failed.
0x00000C8C  Network error *** occurred.
0x00000C8D  Replicator limit for files in a directory exceeded.
0x00000C8E 3214 Tree depth replicator limit exceeded.
0x00000C8F  Unknown message received in mailslot.
0x00000C90  System error *** occurred.
0x00000C91  is set to NO.
0x000000C92  Cannot find IMPORT path ***.
0x00000C93  Cannot find EXPORT path ***.
0x00000C94  *** Systemfehler.
0x00000C95  ***
0x00000C96  on *** due to system error ***.
0x000000C97  The primary domain controller for domain *** appears to have failed.
0x00000C98  ***
0x000000C99  An error occurred while updating the login or logout information for ***.
0x00000C9A  An error occurred synchronizing with the primary domain controller ***
0x00000C9B  Registry entry on this computer to 0.
0x00000C9E  A power failure was detected on the server.
0x00000C9F  The UPS service completed the server shutdown.
0x00000CA0  Custom shutdown command file.
0x00000CA1  the data.
0x00000CA2  Power has been restored.
0x00000CA3  Shutdown command file.
0x00000CA4  command file ***. The error code is the data.
0x00000CB2  Parameter in configuration file ***.
0x00000CB3  Configuration file ***. The invalid row is the data.
0x00000CB4  File ***.
0x00000CB5 3253 The boot block load was temporarily aborted.
0x00000CB6  of files.
0x00000CB7  Library *** returned an incorrect version number.
0x00000CB8  Service link library.
0x00000CB9  The error code is the data.
0x00000CBA is more than 64 KB.
0x00000CBB  System crashed while editing the error log.
0x00000CBC  This computer was successfully joined to domain ***.
0x00000CBD  This computer was successfully added to the workgroup "***".
0x00000CE3  *** *** *** *** *** *** *** *** ***.
0x00000CE5  Remote-IPC
$00CE6 3302 Remote-Admin
0x00000CE7  Logon server release
0x00000CE8  A network error has occurred.
0x00000D48  There is not enough memory to start the workstation service.
0x00000D49 3401 There was an error reading the NETWORKS entry in the LANMAN.INI file.
0x00000D4A  This is an invalid argument: ***.
0x00000D4B  Syntax error and will be ignored.
0x00000D4C 3404 There are too many NETWORKS entries in the LANMAN.INI file.
0x00000D4E  Device driver *** = ***.
0x00000D4F  Device driver *** sent a bad BiosLinkage response.
0x00000D50 3408 The program cannot be used with this operating system.
0x00000D51  The redirector is already installed.
0x00000D52  Installing NETWKSTA.SYS version ***.***.***(***)
0x00000D53  Press Enter to continue.
0x0000D54  Problem with resolver linkage.
0x000000D55  Please clean and log off.
0x00000D56  You will be automatically disconnected at ***.
0x00000D57 3415 Your login time at *** has expired.
0x00000D58 3416 Your login time at *** ended at ***.
0x00000D59  open can lose data.
0x00000D5A  Two minutes to log out or you will be disconnected.
0x00000D5B  Disconnection may result in data loss.
0x00000D5C  Default release for internal use
0x00000D5D  Message service
0x00000DAC  The command completed successfully.
0x00000DAD  You used an invalid option.
0x00000DAE  System error *** has occurred.
0x00000DAF  The command contains an invalid number of arguments.
0x00000DB0 3504 The command completed with one or more errors.
0x00000DB1  You used an option with an invalid value.
0x00000DB2 3506 The *** option is unknown.
0x00000DB3  Option *** is ambiguous.
0x00000DB6  A command was used with conflicting switches.
0x00000DB7  Subprogram *** could not be found.
0x00000DB8  System.
0x0000DB9  There is more data available than Windows can return.
0x00000DBA  More help is available by typing NET HELPMSG ***.
0x00000DBB  This command can only be used on a Windows domain controller.
0x000000DBC  This command cannot be used on a Windows domain controller.
0x00000DC0  These Windows services are starting:
0x0000DC1  The *** service was not started.
0x00000DC2 3522 The *** service is starting
0x00000DC3  The *** service failed to start.
0x00000DC4  The *** service started successfully.
0x00000DC5  Stopping the workstation service also stops the server service.
0x00000DC6  The workstation has open files.
0x0000DC7  The *** service is being terminated
0x0000DC8  The *** service could not be stopped.
0x0000DC9  The *** service ended successfully.
0x00000DCA  Stopping the *** service will also stop these services.
0x00000DCD  The service is starting or stopping. Please try again later.
0x000000DCE  The service did not report any error.
0x00000DCF  An error occurred while controlling the device.
0x00000DD0  The *** service resumed successfully.
0x00000DD1  The *** service was stopped successfully.
0x00000DD2  The *** service could not be continued.
0x00000DD3  The *** service could not be stopped.
0x00000DD4  *** Service Resume is pending
0x00000DD5  The *** break is pending
0x00000DD6  *** continued successfully.
0x00000DD7  *** was stopped successfully.
0x00000DD8 3544 The *** service was started by another process and is pending.
0x00000DDB  A service-specific error occurred: ***.
0x00000E4C  These workstations have sessions on this server:
0x00000E4D  These workstations have sessions with open files on this server:
0x00000E52  The message alias is forwarded.
0x00000E56  You have these remote connections:
0x00000E57  Proceeding breaks the connections.
0x00000E5B  ***'s session has open files.
0x00000E5C  Saving new connections.
0x00000E5D  New connections are not saved.
0x00000E5E  An error occurred while saving your profile: Access is denied. The status of your saved connections has not changed.
0x00000E5F  There was an error reading your profile.
0x00000E60  There was an error reconnecting to ***.
0x00000E62 3682 No network services were started.
0x00000E63  There are no entries in the list.
0x00000E68  Users have open files on ***. Continuing will force the files to close.
0x00000E69  The Workstation service is already running. Windows ignores workstation command options.
0x00000E6B  Open files and/or incomplete directory searches are waiting for connection to ***.
0x00000E6D  The request is being processed on a domain controller for domain ***.
0x00000E6E  The shared queue cannot be deleted while a print job is spooling to the queue.
0x00000E6F  *** has a remembered connection to ***.
0x000000E7E  There was an error opening the help file.
0x00000E7F  The help file is empty.
0x00000E80  The help file is corrupt.
0x000000E81  Could not find a domain controller for domain ***.
0x00000E82  The version there Software.
0x000000E84  The device type is unknown.
0x000000E85  The log file has been corrupted.
0x00000E86  Program file names must end with .EXE.
0x00000E87  A matching share could not be found, so nothing was deleted.
0x00000E88 3720 There is an invalid value in the units per week field of the user record.
0x00000E89  The password is invalid for ***.
0x00000E8A  An error occurred while sending a message to ***.
0x00000E8B  The password or username is invalid for ***.
0x00000E8D  An error occurred while deleting the share.
0x00000E8E 3726 The username is invalid.
0x00000E8F  The password is invalid.
0x000000E90  The passwords do not match.
0x000000E91  Your persistent connections were not all restored.
0x00000E92  This is not a valid computer name or domain name.
0x00000E94  Unable to set default permissions for this resource.
0x00000E96 3734 No valid password was entered.
0x00000E97 3735 A valid name was not entered.
0x00000E98  The named resource cannot be released.
0x00000E99  The permission string contains invalid permissions.
0x00000E9A  You can only perform this operation on printers and communication devices.
0x00000E9E  *** is an invalid user or group name.
0x00000E9F  The server is not configured for remote administration.
0x00000EA8  No users have sessions with this server.
0x00000EA9  User *** is not a member of group ***.
0x00000EAA  User *** is already a member of group ***.
0x00000EAB  There is no such user: ***.
0x00000EAC  This is an invalid response.
0x00000EAD  A valid response was not provided.
0x000000EAE  The destination list provided does not match the print queue destination list.
0x00000EAF  Your password cannot be changed until ***.
0x00000EB0  *** is not a recognized day of the week.
0x00000EB1 3761 The specified time range ends before it begins.
0x00000EB2  *** is not a recognized hour.
0x00000EB3  *** is not a valid specification for minutes.
0x00000EB4  The time specified is not accurate to the hour.
0x00000EB5  Do not mix 12 and 24 hour time formats.
0x00000EB6  *** is not a valid 12-hour suffix.
0x00000EB7 3767 An invalid date format was specified.
0x00000EB8 3768 An invalid day range was specified.
0x00000EB9  An illegal time range was specified.
0x00000EBA  Length and/or arguments supplied.
0x00000EBB  The ENABLESCRIPT value must be YES.
0x00000EBD  An invalid country code was specified.
0x00000EBE  to the local USERS group.
0x00000EBF  The specified user context is invalid.
0x00000EC0  encountered trying to use it.
0x00000EC1  Sending files is no longer supported.
0x00000EC2  You are not allowed to specify paths for ADMIN$ and IPC$ shares.
0x0000EC3  User or group *** is already a member of local group ***.
0x00000EC4  There is no such user or group: ***.
0x00000EC5  There is no such computer: ***.
0x0000EC6  Computer *** already exists.
0x00000EC7  There is no such global user or group: ***.
0x00000EC8 3784 Only disk shares can be marked as cacheable
0x00000ECE  The system could not find the message: ***.
0x000000EDA  This schedule date is invalid.
0x000000EDB  The LANMAN root directory is not available.
0x00000EDC  The SCHED.LOG file could not be opened.
0x00000EDD  The server service did not start.
0x00000EDE 3806 The AT job ID does not exist.
0x000000EDF  The AT schedule file is corrupt.
0x00000EE0  The delete operation failed due to a problem with the AT schedule file.
0x00000EE1  The command line cannot exceed 259 characters.
0x00000EE2  The AT schedule file could not be updated because the disk is full.
0x00000EE4  The AT schedule file is invalid. Please delete the file and create a new one.
0x00000EE5  The AT schedule file has been deleted.
0x00000EE6  You can specify the time in 24-hour HH:MM format.
0x00000EE7  Please try again later.
0x00000EE8  as the maximum password age.
0x00000EE9  on servers with inferior software. Please enter a lower value.
0x00000F1E  *** is not a valid computer name.
0x00000F1F  *** is not a valid Windows network message number.
0x00000F3C  Message from *** to *** on ***
0x00000F3D  ****
0x00000F3E  **** Unexpected end of message ****
0x00000F41  Press ESC to exit
0x00000F42  ...
0x00000F46  Current time at *** is ***
0x00000F47  Time at ***? ***:
0x00000F48  Could not find a time server.
0x000000F49  The domain controller for domain *** could not be found.
0x00000F4A  local time (GMT***) at *** is ***
0x00000F4B  The user's home directory could not be determined.
0x00000F4C  The user's home directory was not specified.
0x0000F4D  The name specified for the user's home directory (***) is not a Universal Naming Convention (UNC) name.
0x00000F4E  Drive *** is now connected to ***. Your home directory is ***\***.
0x00000F4F  Drive *** is now connected to ***.
0x000000F50  There are no more available drive letters.
0x00000F5C *** is not a valid domain or workgroup name.
0x00000F5F  The current SNTP value is: ***
0x00000F60  This computer is not currently configured to use a specific SNTP server.
0x00000F61  This current auto-configured SNTP value is: ***
0x00000F6E 3950 Reissue the specified operation as a cached IO operation
0x00000F6F  You specified too many values for the *** option.
0x00000F70  You entered an invalid value for the *** option.
0x00000F71  The syntax is incorrect.
0x00000F78  You specified an invalid file number.
0x00000F79  You specified an invalid print job number.
0x0000F7B  The specified user or group account cannot be found.
0x00000F7D  Services for NetWare.
0x00000F7E  File and Print Services for NetWare are not installed.
0x00000F7F  Unable to set user properties for File and Print Services for NetWare.
0x00000F80  Password for *** is: ***
0x000000F81  NetWare compatible login
0x00000FA0  WINS encountered an error while processing the command.
0x00000FA1  The local WINS cannot be deleted.
0x00000FA2  Import from file failed.
0x00000FA3  The backup failed. Was a full backup performed beforehand?
0x00000FA4  The backup failed. Check the directory where you are backing up the database.
0x00000FA5  The name does not exist in the WINS database.
0x00000FA6  Replication with an unconfigured partner is not allowed.
0x00000FD2  The version of the provided content information is not supported.
0x00000FD3 4051 The content information provided is incorrect.
0x00000FD4  The requested data cannot be found in local or peer caches.
0x00000FD5  No more data is available or required.
0x00000FD6  The provided object was not initialized.
0x00000FD7  The returned object has already been initialized.
0x00000FD8  A shutdown operation is already in progress.
0x00000FD9  The provided object has already been invalidated.
0x00000FDA  An item already exists and has not been replaced.
0x00000FDB  The requested operation cannot be canceled because it has already completed.
0x00000FDC  The requested operation cannot be performed because it has already been performed.
0x00000FDD  An operation accessed data outside the bounds of valid data.
0x00000FDE  The requested version is not supported.
0x00000FDF  A configuration value is invalid.
0x00000FE0  The SKU is not licensed.
0x00000FE1  The PeerDist service is still initializing and will be available shortly.
0x00001004  The DHCP client obtained an IP address that is already in use on the network. The local interface is disabled until the DHCP client can obtain a new address.
0x00001068  The supplied GUID was not recognized as valid by a WMI data provider.
0x00001069  The instance name passed was not recognized as valid by a WMI data provider.
0x00000106A  The passed data item ID was not recognized as valid by a WMI data provider.
0x00000106B  The WMI request could not be completed and should be retried.
0x00000106C  The WMI data provider could not be found.
0x0000106D  The WMI data provider references an instance set that has not been registered.
0x00000106E  The WMI data block or event notification has already been enabled.
0x00000106F  The WMI data block is no longer available.
0x00001070  The WMI data service is not available.
0x00001071  The WMI data provider could not complete the request.
0x00001072  The WMI MOF information is invalid.
0x00001073  The WMI registry information is invalid.
0x00001074  The WMI data block or event notification has already been disabled.
0x00001075  The WMI data item or data block is read-only.
0x00001076  The WMI data item or data block could not be modified.
0x00000010CC  The media identifier does not represent a valid medium.
0x00000010CD  The library ID does not represent a valid library.
0x00000010CE  The media pool identifier does not represent a valid media pool.
0x00000010CF  Drive and media are incompatible or exist in different libraries.
0x0000010D0  The media currently exists in an offline library and must be online to perform this operation.
0x0000010D1  The operation cannot be performed on an offline library.
0x0000010D2  The library, drive, or media pool is empty.
0x0000010D3  The library, drive, or media pool must be empty to perform this operation.
0x0000010D4  There are currently no media available in this media pool or library.
0x0000010D5  A resource required for this operation is disabled.
0x0000010D6  The media ID does not represent a valid cleaner.
0x0000010D7  The drive cannot be cleaned or does not support cleaning.
0x0000010D8  The object identifier does not represent a valid object.
0x0000010D9  Unable to read or write to the database.
0x00000010DA  The database is full.
0x00000010DB  The media is not compatible with the device or media pool.
0x0000010DC  The resource required for this operation does not exist.
0x0000010DD  The operation ID is invalid.
0x000010DE  The media is not mounted or ready for use.
0x000010DF  The device is not operational.
0x000010E0  The operator or administrator denied the request.
0x0000010E1  The drive identifier does not represent a valid drive.
0x0000010E2  Library is full. There is no slot available.
0x0000010E3  The transport cannot access the medium.
0x0000010E4  The medium cannot be loaded into the drive.
0x0000010E5  Unable to get drive status.
0x0000010E6  Unable to get slot status.
0x0000010E7  Failed to get transport status.
0x0000010E8  The transport cannot be used because it is already in use.
0x0000010E9  The inject/eject port cannot be opened or closed.
0x00000010EA  The medium cannot be ejected because it is in a drive.
0x000010EB 4331 A cleaner slot is already reserved.
0x0000010EC  A cleaner slot is not reserved.
0x00000010ED  The cleaning cartridge has performed the maximum number of drive cleanings.
0x0000010EE  Unexpected identifier on media.
0x00000010EF  The last remaining item in this group or resource cannot be deleted.
0x0000010F0  The message provided exceeds the maximum size allowed for this parameter.
0x0000010F1  The volume contains system or swap files.
0x00000010F2  The media type cannot be removed from this library because at least one drive in the library reports that it can support this media type.
0x0000010F3  This offline media cannot be mounted on this system because there are no mounted drives to use.
0x0000010F4  A cleaning cartridge is present in the tape library.
0x0000010F5  The inject/eject port cannot be used because it is not empty.
0x000010F6  Error
0x000010F7  OK
0x000010F8  J
0x000010F9  N
0x000010FA  Any
0x000010FB  A
0x000010FC  S
0x000010FD (not found)
0x00000010FE  This file cannot currently be used on this computer.
0x00000010FF  The remote storage service is not operational at this time.
0x00001100  The remote storage service encountered a media error.
0x00001101  The reading
0x00001102  Change
0x00001103  Full
0x00001104  Please enter the password:
0x00001105  Enter the password for ***:
0x00001106  Please enter a password for the user:
0x00001107  Please enter the password for the shared resource:
0x00001108  Enter your password:
0x00001109  Please re-enter the password for confirmation:
0x00000110A  Enter the user's old password:
0x00000110B  Enter the user's new password:
0x0000110C  Enter your new password:
0x00000110D  Please enter the password for the replicator service:
0x0000110E  Enter your username or press Enter if it is ***:
0x0000110F  press ENTER if this is domain ***:
0x00001110  Enter your username:
0x00001111  Network statistics for \\***
0x00001112  Print options for ***
0x00001113  Communication device queues accessing ***
0x00001114  Details of the print job
0x00001115 [4373 Communication device queues at \\***
0x00001116  printer at ***
0x00001117  Printer accessing ***
0x00001118  Print jobs at ***:
0x00001119 4377 Shared resources at ***
0x0000111A  The following running services can be controlled:
0x00000111B  Statistics are available for the following running services:
0x0000111C  User accounts for \\***
0x0000111D  The syntax of this command is:
0x0000111E  The options of this command are:
0x0000111F  Please enter the primary domain controller name:
0x00001120  is ***, please re-enter.
0x00001121  Sunday
0x00001122  Montag
0x00001123  Tuesday
0x00001124  Wednesday
0x00001125  Thursday
0x00001126  The file or directory is not a reparse point.
0x00001127  The reparse point attribute cannot be set because it conflicts with an existing attribute.
0x00001128  The data present in the reparse point buffer is invalid.
0x00001129  The tag present in the reparse point buffer is invalid.
0x00000112A  There is a mismatch between the tag specified in the request and the tag present in the reparse point.
0x0000112B  W
0x0000112C  Th
0x0000112D  F
0x0000112E  S
0x0000112F  At
0x00001130  Group accounts for \\***
0x00001131  Group name
0x00001132  Comment
0x00001133  members
0x00001135  aliases for \\***
$001136 4406 Aliasname
0x00001137  Comment
0x00001138  members
0x0000113A  User accounts for \\***
0x0000113B  Username
0x0000113C  Full name
0x0000113D  Comment
0x0000113E  User comment
0x0000113F  Parameter
0x00001140  country code
0x00001141  Permission level
0x00001142  Operator privileges
$001143 4419 Account active
0x00001144  Account expires
0x00001145  Password last set
0x00001146  Password expires
0x00001147  Password changeable
0x00001148  Workstations allowed
0x00001149  Maximum disk space
0x0000114A  Unlimited
0x0000114B  Local group memberships
0x0000114C  Domain controller
$00114D 4429 Review script
0x0000114E  Last login
0x0000114F  Global group memberships
0x00001150 4432 login hours allowed
0x00001151  All
0x00001152  None
0x00001153  Daily *** - ***
0x00001154  Home directory
0x00001155  Password required
0x00001156  User is allowed to change password
0x00001157  User profile
0x00001158  Locked
$001162 4450 Computername
0x00001163  Username
0x00001164  Softwareversion
$001165 4453 Workstation aktiv an
0x00001166  Windows NT root directory
0x00001167  Workstation domain
0x00001168  Login domain
0x00001169 4457 Other domain(s)
0x0000116A  COM offen Timeout (Sek.)
0x0000116B  COM Send Count (bytes)
0x0000116C  COM send timeout (ms)
0x0000116D  DOS session print timeout (sec)
0x00000116E  Maximum error log size (KB)
0x0000116F 4463 Maximum Cache Memory (KB)
0x00001170 4464 Number of network buffers
0x00001171 4465 Number of character buffers
0x00001172  Size of network buffers
0x00001173  Character buffer size
0x00001174  Full computer name
0x00001175  DNS name of workstation domain
0x00001176  Windows 2002
$001181  Servername
$01182 4482 Server Comment
0x00001183  Send admin notifications to
0x00001184  Softwareversion
$001185 4485 Peerserver
$001186  Windows NT
$001187 4487 Serverebene
$001188 4488 Windows NT-Server
0x00001189  Server is active on
$00118C 4492 Server hidden
0x00001194 4500 Single Instance Storage is not available on this volume.
0x00000119A  Maximum logged in users
0x00000119B  Maximum number of concurrent administrators
0x0000119C  Maximum shared resources
0x0000119D  Maximum connections to resources
0x00000119E  Maximum number of open files on the server
0x00000119F  Maximum open files per session
0x0000011A0  Maximum file locks
0x0000011A8  Idle session time (min)
0x000011AE  Release level
0x000011AF  User level
0x000011B2 4530 Unlimited server
0x000011DA  Force user logoff how long after time expires?:
0x000011DB  Lock account after how many wrong passwords?:
0x000011DC  Minimum password age (days):
0x000011DD  Maximum password age (days):
0x000011DE  Minimum password length:
0x00000011DF  Length of saved password history:
0x000011E0  Computerrolle:
0x0000011E1  Primary domain controller for workstation domain:
0x000011E2  Blocking threshold:
0x000011E3  Lock Duration (minutes):
0x000011E4 4580 Lock Observation Window (Minutes):
0x000011F8  Statistics since
0x0000011F9  Sessions accepted
0x0000011FA  Sessions timed out
0x00000011FB 4603 Sessions failed
0x000011FC  Kilobytes sent
0x000011FD  Kilobytes received
0x000011FE  Mean Response Time (ms)
0x0000011FF  Network error
0x00001200  Access to files
0x00001201  Print jobs spooled
0x00001202  System error
0x00001203  Password violations
0x00001204  Permission violations
0x00001205  Access to communication devices
0x00001206 4614 sessions started
0x00001207  Sessions reconnected
0x00001208  Failed to start session
0x00001209  Sessions disconnected
0x0000120A 4618 network I/Os performed
0x00000120B  Access to files and pipes
0x00000120C  times Buffer exhausted
0x0000120D  Large buffers
0x0000120E 4622 request buffer
0x0000120F  Workstation statistics for \\***
0x00001210 4624 server statistics for \\***
0x00001211  Statistics since ***
0x00001212  Connections established
0x00001213  Connections failed
0x00001216  Bytes empfangen
0x00001217  Server Message Blocks (SMBs) received
0x00001218  bytes transferred
0x0001219  Server Message Blocks (SMBs) were transferred
0x0000121A  Reads
0x00000121B  writes
0x00000121C  Raw reads denied
0x00000121D  Raw writes denied
0x00000121E  Network error
0x0000121F  Connections established
0x00001220 4640 reconnects made
0x00001221  Server disconnects
0x00001222 4642 sessions started
0x00001223  Hanging sessions
0x00001224  Failed sessions
0x00001225  Failed operations
0x00001226 Use 4646 count
0x00001227  Failed usage count
0x0000122A  *** was deleted successfully.
0x0000122B  *** was used successfully.
0x00000122C  The message was successfully sent to ***.
0x00000122D  The message name *** was forwarded successfully.
0x0000122E  The message name *** was added successfully.
0x00000122F  The forwarding of the message name was canceled successfully.
0x00001230  *** was shared successfully.
0x00001231  The server *** successfully registered you as ***.
0x00001232  *** successfully logged out.
0x00001233  beim Start.
0x00001235  The password was successfully changed.
0x00001236  *** File(s) copied.
0x00001237  *** File(s) moved.
0x00001238  The message was successfully sent to all users on the network.
0x00001239  The message was successfully sent to domain ***.
0x00000123A  The message was successfully sent to all users of this server.
0x00000123B  The message was successfully sent to group ****.
0x00001257  Microsoft LAN Manager-Version ***
$001258  Windows NT-Server
$001259  Windows NT-Workstation
0x00000125A  Advanced MS-DOS workstation
0x0000125B  Created at ***
$00125C  ServernameBemerkung
0x0000125D  Cannot list servers in a non-default compartment.
0x0000125E  (UNC)
0x0000125F  ...
0x00001260 4704 domain
0x00001261 4705 resources on ***
0x00001262  Invalid network provider. Available networks are:
0x00001266  Hard disk
0x00001267  Print
$001268  Comm
0x00001269  IPC
0x00000126A  Remote local network status
0x0000126B  OK
0x0000126C  Idle
0x0000126D  Paused
0x0000126E  Disconnected
0x0000126F  Error
0x00001270  Connecting
0x00001271  Reconnecting
0x00001272  State
$001273 4723 Premises Name
$001274 4724 Remote-Name
0x00001275  Resource type
0x00001276  # Opens
0x00001277  # Connections
0x00001278  Not available
0x0000127A  ResourceRemark share name
0x0000127B  Share name
0x0000127C  Resource
0x0000127D  Flushed
0x0000127E  Permission
0x0000127F 4735 Maximum number of users
0x00001280  No limit
0x00001281  User
0x00001282  Are you sure you want to use this share name? ***:
$001283 4739 Caching
0x00001284  id path username# Locked
0x00001285 4741 Datei-ID
0x00001286  Lock
0x00001287  Permissions
0x00001288  Share name
0x00001289  Typ
0x0000128A  Used as
0x0000128B  Comment
0x0000128E 4750 Computer User Name Client Type Opens idle time
0x0000128F  Computer
0x00001290  Session time
0x00001291  Idle time
0x00001292  Share name type # Opens
$001293 4755 Client-Typ
0x00001294  Guest login
0x0000012A2  Manual caching of documents
0x0000012A3  Automatic caching of documents
0x0000012A4  Automatic caching of programs and documents
0x0000012A5  Manually caching documents with BranchCache enabled
0x0000012A6  Caching disabled
0x000012A7  Automatic
0x000012A8  manual
0x000012A9  Documents
0x000012AA  Programme
0x000012AB 4779 BranchCache
0x000012AC  None
0x000012C0  Name
0x000012C1  Forwarded to
0x000012C2  Forwarded to you by
0x0000012C3  Users of this server
0x000012C4 4804 Net send was interrupted by user ctrl+pause.
0x000012CA 4810 Name Job #SizeStatus
0x000012CB  Jobs
0x000012CD  Name
0x000012CE  Job-Nr.
0x000012D0  state
$00012D1 4817 Train file
0x000012D2  Comment
0x000012D3 4819 priority
0x000012D4  Print to
0x000012D5  Print to
0x000012D6 4822 print processor
0x000012D7  Additional information
0x000012D8  Parameter
0x0000012D9  Printing devices
0x0000012DA  Printer active
0x000012DB  Printer held
0x000012DC  Printer error
0x00000012DD  Printer will be deleted
0x00000012DE  Printer status unknown
0x000012E8  held until ***
0x000012E9  Job-Nr.
0x0000012EA  Submitting user
0x000012EB  Notify
0x000012EC 4844 order data type
0x000012ED  Job parameters
0x000012EE  Waiting
0x000012EF 4847 Held in queue
$00012F0 4848 Spoolen
0x000012F1  Paused
$00012F2  Offline
0x000012F3  Error
0x000012F4  Out of paper
0x000012F5  Intervention required
0x0000012F6  Printing
0x000012F7  an
0x000012F8  Stopped at ***
0x000012F9  Offline am ***
0x000012FA  Error at***
0x000012FB  Out of paper at ***
0x000012FC  Check printer for ***
0x000012FD  Printing on ***
0x000012FE  driver
0x00001342  UsernameType Date
0x00001343  Lockout
$001344  Service
$001345  Server
0x00001346  Server started
0x00001347  Server stopped
0x00001348  Server resumed
0x00001349  The server has stopped
0x00000134A  Session
0x00000134B  Login guest
0x00000134C  Login user
$00134D 4941 Review Manager
0x00000134E  Normal logout
0x00000134F  Login
0x00001350  Logout error
0x00001351  Disconnect automatic logout
0x00001352  Administrator logout - disconnect
0x00001353  Forced logout due to login restrictions
$001354  Service
0x00001355  *** Installed
0x00001356  *** Install pending
0x00001357  *** Paused
0x00001358  *** Pause pending
0x00001359  *** Continued
0x0000135A  *** Pending to continue
0x0000135B  *** Stopped
0x0000135C  *** Pending stop
0x0000135D  Account
0x00000135E  User account *** has been changed.
0x00000135F  Group account *** has been changed.
0x00001360  User account *** has been deleted
0x00001361  Group account *** has been deleted
0x00001362  User account *** has been added
0x00001363  Added group account ***
0x00001364  Account system settings have been changed
0x00001365  Login restriction
0x0001366  Limit exceeded: UNKNOWN
0x00001367  Limit exceeded: login hours
0x00001368  Limit exceeded: Account expired
0x0001369  Limit exceeded: Invalid workstation ID
0x00000136A  Limit exceeded: Account disabled
0x00000136B  Limit exceeded: Account deleted
0x0000136C  shares
0x0000136D  Use ***
0x0000136E  Unused ***
0x0000136F  User session disconnected ***
0x00001370  The administrator has stopped sharing resources ***
0x00001371  User has reached limit for ***
0x00001372  Invalid password
0x00001373  Administrator rights required
0x00001374  Access
0x00001375  *** Permissions added
0x00001376  *** Permissions changed
0x00001377  *** Permissions cleared
0x00001378  Access denied
0x00001379  Unknown
0x0000137A  Other
0x0000137B  Duration:
0x0000137C  Duration: Not available
0x0000137D  Duration: Less than one second
0x0000137E  (none)
0x0000137F  Closed ***
0x00001380  Closed *** (disconnected)
0x00001381  Administrator closed ***
0x00001382  Access terminated
0x00001383  Log on to the network
0x00001384  Login denied
0x00001385  Program message time
0x00001386  Account locked due to *** incorrect passwords
0x00001387  Account unlocked by administrator
0x00001388  Deregister network
0x00001389  The operation cannot be completed because other resources depend on this resource.
0x00000138A  The cluster resource dependency cannot be found.
0x00000138B  The cluster resource cannot be made dependent on the specified resource because it is already dependent.
0x00000138C  The cluster resource is not online.
0x00000138D  A cluster node is not available for this operation.
0x00000138E  The cluster resource is not available.
0x00000138F  The cluster resource could not be found.
0x00001390  The cluster is shutting down.
0x00001391  A cluster node cannot be removed from the cluster unless the node has failed or it is the last node.
0x00001392  The object already exists.
0x00001393  The object is already in the list.
0x00001394  The cluster group is not available for any new requests.
0x00001395  The cluster group could not be found.
0x00001396  The operation could not be completed because the cluster group is not online.
0x00001397  The operation failed because either the specified cluster node is not the owner of the resource or the node is not a possible owner of the resource.
0x00001398  The operation failed because either the specified cluster node is not the owner of the group or the node is not a possible owner of the group.
0x00001399  The cluster resource could not be created in the specified resource monitor.
0x00000139A  The resource monitor could not bring the cluster resource online.
0x00000139B  The operation could not be completed because the cluster resource is online.
0x00000139C  The cluster resource could not be deleted or taken offline because it is the quorum resource.
0x00000139D  The cluster could not make the specified resource a quorum resource because it cannot be a quorum resource.
0x00000139E  The cluster software is shutting down.
0x00000139F  The group or resource is not in the right state to perform the requested operation.
0x0000013A0  The properties have been saved, but not all changes will take effect until the next time the resource is brought online.
0x0000013A1  The cluster could not make the specified resource a quorum resource because it does not belong to a shared storage class.
0x0000013A2  The cluster resource could not be deleted because it is a core resource.
0x0000013A3  The quorum resource could not be brought online.
0x0000013A4  The quorum log could not be created or mounted successfully.
0x0000013A5  The cluster log is corrupt.
0x0000013A6  The record could not be written to the cluster log because it exceeds the maximum size.
0x0000013A7  The cluster log exceeds its maximum size.
0x0000013A8  No checkpoint entry was found in the cluster log.
0x0000013A9  The minimum disk space required for logging is not available.
0x0000013AA  The cluster node could not take control of the quorum resource because the resource is owned by another active node.
0x0000013AB  A cluster network is not available for this operation.
0x0000013AC  A cluster node is not available for this operation.
0x00000013AD  All cluster nodes must be running to perform this operation.
0x0000013AE  A cluster resource failed.
0x0000013AF  The cluster node is invalid.
0x0000013B0  The cluster node already exists.
0x0000013B1  A node is about to join the cluster.
0x0000013B2  The cluster node was not found.
0x0000013B3  The cluster local node information was not found.
0x0000013B4  The cluster network already exists.
0x0000013B5  The cluster network was not found.
0x0000013B6  The cluster network interface already exists.
0x0000013B7  The cluster network interface was not found.
0x0000013B8  The cluster request is not valid for this object.
0x0000013B9  The cluster network provider is invalid.
0x0000013BA  The cluster node has failed.
0x000013BB 5051 The cluster node is unreachable.
0x0000013BC  The cluster node is not a member of the cluster.
0x0000013BD  No cluster join operation is performed.
0x0000013BE  The cluster network is invalid.
0x000013BF  Mar
0x0000013C0  The cluster node is active.
0x0000013C1  The cluster IP address is already in use.
0x0000013C2  The cluster node was not stopped.
0x0000013C3  No cluster security context is available.
0x0000013C4  The cluster network is not configured for internal cluster communication.
0x0000013C5  The cluster node is already active.
0x000013C6 5062 The cluster node has already failed.
0x0000013C7  The cluster network is already online.
0x0000013C8  The cluster network is already offline.
0x0000013C9  The cluster node is already a member of the cluster.
0x00000013CA  The cluster network is the only one configured for intra-cluster communication between two or more active cluster nodes. The internal communication capability cannot be removed from the network.
0x0000013CB  One or more cluster resources depend on the network to provide service to clients. The Client Access feature cannot be removed from the network.
0x00000013CC  This operation cannot be performed on the cluster resource because it is the quorum resource. You may not take the quorum resource offline or change its list of possible owners.
0x00000013CD  The cluster quorum resource cannot have any dependencies.
0x000013CE 5070 The cluster node has stopped.
0x00000013CF  The cluster resource cannot be brought online. The owner node cannot run this resource.
0x0000013D0  The cluster node is not ready to perform the requested operation.
0x0000013D1  The cluster node is shutting down.
0x0000013D2  The cluster join operation was canceled.
0x0000013D3  The cluster join operation failed due to incompatible software versions between the joining node and its sponsor.
0x0000013D4  This resource cannot be created because the cluster has reached the limit on the number of resources it can monitor.
0x0000013D5  The system configuration changed during cluster join or form operation. The join or form operation was canceled.
0x0000013D6  The specified resource type was not found.
0x0000013D7  The specified node does not support a resource of this type. This may be due to version inconsistencies or the absence of the resource DLL on that node.
0x0000013D8  The specified resource name is not supported by this resource DLL. This may be due to an invalid (or changed) name assigned to the resource DLL.
0x0000013D9  An authentication package could not be registered with the RPC server.
0x0000013DA  You cannot bring the group online because the group owner is not in the preferred list for the group. To change the owner node for the group, move the group.
0x000013DB 5083 The join operation failed because the cluster database sequence number has changed or is incompatible with the locker node. This can happen during a join operation if the cluster database has changed during the join.
0x0000013DC  The resource monitor does not allow the error operation to run while the resource is in its current state. This can happen when the resource is in a pending state.
0x00000013DD  A non-lock code received a request to reserve the lock for global updates.
0x00000013DE  The cluster service could not find the quorum disk.
0x0000013DF  The backed up cluster database may be corrupt.
0x0000013E0  A DFS root already exists in this cluster node.
0x0000013E1  An attempt to change a resource property failed because it conflicts with another existing property.
0x000013E2  Spain
0x000013E3  Denmark
0x000013E4  Sweden
0x000013E5  Norway
0x000013E6  Germany
0x000013E7  Australia
0x000013E8  Japan
0x000013E9  Korea
0x000013EA  China (VR China)
0x000013EB  Taiwan
0x000013EC  Asia
0x000013ED  Portugal
0x000013EE  Finland
0x000013EF  Arabic
0x000013F0  Hebrew
0x0000141E  A power failure has occurred at ***. Please stop all activity with this server.
0x0000141F  Power restored at ***. Normal operations have resumed.
0x00001420  The UPS service will shut down from ***.
0x00001421  The UPS service is in the process of shutting down permanently.
0x00001432  The workstation must be started with the NET START command.
0x00001437 5175 Remote-IPC
$001438 5176 Remote-Admin
0x00001439  Default release
0x00000143A  User profiles
0x000014A0  this account. Do you want to continue this process? ***:
0x000014A1  Do you want to overwrite the saved connection? ***:
0x000014A2  causes the error to be ignored. ***:
0x0000014A4  Do you want to continue with this operation? ***:
0x000014A5  Would you like to add this? ***:
0x0000014A6  Do you want to continue with this operation? ***:
0x000014A7  Can I start it? ***:
0x0000014A8  Do you want to start the workstation service? ***:
0x000014A9  Is it ok to continue the disconnect and force close? ***:
0x0000014AA  The printer does not exist. Do you want to create it? ***:
0x000014AB  No
0x000014AC  No
0x000014AD  No
0x000014AF  NET.HLP
0x000014B0  NET.HLP
0x000014B1  Deny
0x0000014B4  The NCB is the data.
0x0000014B5  The NCB is the data.
0x000014B6  Invalid. The NCB is the data.
0x0000014B7  The NCB is the data.
0x000014B8  Invalid. The NCB is the data.
0x000014B9  ended abnormally. The NCB contains the data.
0x0000014BA  The NCB is the data.
0x0000014BB  The NCB is the data.
0x000014BC 5308 The NCB is the data.
0x0000014BD  The network control block (NCB) request was denied. The NCB is the data.
0x000014BE  The NCB is the data.
0x000014BF 5311 The NCB is the data.
0x000014C0  illogical. The NCB is the data.
0x0000014C1  The network control block (NCB) request was denied. The NCB is the data.
0x0000014C2  The network control block (NCB) request was denied. The NCB is the data.
0x0000014C3  The network control block (NCB) command has completed. The NCB is the data.
0x0000014C4  The NCB is the data.
0x0000014C5  The NCB is the data.
0x000014C6  on the remote computer. The NCB is the data.
0x0000014C7  The NCB is the data.
0x000014C8  did not respond. The NCB is the data.
0x000014C9  00h in the NCB name. The NCB is the data.
0x000014CA 5322 The NCB is the data.
0x000014CB 5323 The NCB is the data.
0x000014CC 5324 The NCB is the data.
0x000014CD  Names on the network. The network control block (NCB) is the data.
0x000014CE  Incompatible remote device. The network control block (NCB) contains the data.
0x0000014D5  The network control block (NCB) request was denied. The NCB is the data.
0x0000014D6  The NCB request was denied. The NCB is the data.
0x0000014D7  The NCB is the data.
0x000014D8 5336 The NCB is the data.
0x0000014D9  The NCB is the data.
0x000014DA 5338 The NCB is the data.
0x0000014E7  The NCB request was denied. The NCB is the data.
0x000014E8  the data.
0x0000014EA  The network control block (NCB) request was denied. The NCB is the data.
0x0000014EC  The network control block (NCB) request was denied. The NCB is the data.
0x0000014F4  The network control block (NCB) request was denied. The NCB is the data.
0x0000014F5  The network control block (NCB) request was denied. The NCB is the data.
0x0000014F6  The network control block (NCB) request was denied. The NCB is the data.
0x0000014F7  The network control block (NCB) request was denied. The NCB is the data.
0x0000014F8  The network control block (NCB) request was denied. The NCB is the data.
0x0000014F9  The network control block (NCB) request was denied. The NCB is the data.
0x0000014FA  The NCB is the data.
0x00001504  The network control block (NCB) request was denied. The NCB is the data.
0x00001505  The NCB is the data.
0x0000157C  Domain Controller *** is not getting the updates.
0x0000157D  gets the updates.
0x0000157E  exceeds the maximum allowed skew of *** seconds.
0x0000157F  due to *** invalid password attempts.
0x00001580  The *** log file cannot be opened.
0x00001581  The *** log file is corrupt and will be deleted.
0x00001582  Standardprotokolldatei.
0x00001583  If this dialog box appears again, contact your helpdesk or system administrator.
0x00001584  Server initiated full synchronization of security database ***.
0x00001585  A previous working configuration was used instead.
0x0001586  Exception 0x*** occurred in application *** at location 0x***.
0x00001587  (SID).
0x00001588  demoted or removed from the domain.
0x00001589  Relationship.
0x00000158A  A full dump was not saved.
0x00000158B  A dump was saved to: ***.
0x0000158C  (SID). NT should be reinstalled on either *** or ***.
0x0000158D  The trusted domain name should be changed to a valid name.
0x000015E0 5600 The user or script path could not be shared.
0x000015E1  Database.
0x000015E2  Local or network security database.
0x00001644  ***
0x00001645  ***
0x00001646  ***
0x00001647  ***
0x00001648  ***
0x00001649  the change log.
0x0000164A  ***
0x0000164B  The child login request for user *** of *** failed.
0x0000164C  The child logout request for user *** from *** failed.
0x0000164D  failed.
0x0000164E  failed.
0x0000164F  Caller.
0x00001650  ***
0x00001651  the caller.
0x00001652  ***
0x00001653  applied to the database.
0x00001654  ***
0x00001655  Primary domain controller *** completed successfully.
0x00001656  ***
0x00001657  in the specified domain.
0x00001658  Error because computer *** does not have a local security database account.
0x00001659  Otherwise, the account is a cross-domain trust account with the specified domain.
0x0000165A  ***
0x00000165B  If *** is not a domain controller, it should be disassociated from the domain.
0x00000165C  Failed to register control handlers with service controller ***.
0x00000165D  Could not set service status with service controller ***.
0x00000165E  The computer name could not be found ***.
0x00000165F  *** Device driver could not be loaded.
0x00001660  Could not load a transport.
0x00001661  ***
0x00001662  ***
0x00001663  ***
0x00001664  ***
0x00001665  ***
0x00001666  ***
0x00001667  ***
0x00001668  ***
0x00001669  ***
0x0000166A 5738 SERVER global group. It can't be both.
0x0000166B 5739 BDCs from the domain.
0x0000166C  ***
0x0000166D  ***
0x00000166E  The service could not retrieve messages required to boot remote boot clients.
0x0000166F  für 3Com 3Start Remote-Boot-Clients.
0x00001670  The service has encountered a fatal system error and is shutting down.
0x00001671  Start data. The remote boot of this client did not complete.
0x00001672  File ***.
0x00001673  File ***.
0x00001674  on the remote boot server.
0x00001675  because checksum for file *** could not be calculated.
0x00001676  File ***.
0x00001677  line and/or loader line.
0x00001678  File ***.
0x00001679  Service internal error.
0x0000167A  Invalid boot header.
0x00000167B  Client with computer name *** did not start due to a network error.
0x0000167C  Client with adapter ID *** failed to start due to lack of resources.
0x0000167D  The service encountered an error copying the file or directory ***.
0x0000167E  The service encountered an error deleting the file or directory ***.
0x00000167F  The service encountered an error setting permissions on a file or directory ***.
0x00001680  The service encountered an error parsing RPL configurations.
0x00001681  The service encountered an error creating RPL profiles for all configurations.
0x00001682  The service encountered an error accessing the registry.
0x00001683  The service encountered an error replacing the possibly obsolete RPLDISK.SYS.
0x00001684  and the user accounts for each RPL workstation.
0x00001685  The service could not back up its database.
0x00001686  from backup.
0x00001687  will not start.
0x0001688  The service successfully restored its database from backup.
0x00001689  will not start.
0x0000168A  Use the Active Directory Users and Computers tool or Server Manager to remove the BDC account for ***.
0x0000168B  writes to application event log upon completion.
0x00000168C  Lan Manager BDCs are not allowed in NT domains.
0x0000168D  Entries from the SystemRoot\System32\Config\Netlogon.dns file in the DNS database.
0x0000168E  Error value: ***
0x0000168F  Error value: ***
0x00001690  ***
0x00001691  ***
0x00001692  the IP address. Consider adding a subnet object for this IP address.
0x00001693  Rename the site to a valid name.
0x0001694  Correct the name of the subnet object.
0x00001695  controller or by restarting the Net Logon service on the domain controller.
0x00001696  ***
0x00001697  not responding. The current Netlogon RPC call to \\*** to *** was aborted.
0x00001698 5784 Directory server replication cost.
0x00001699  This domain controller no longer automatically covers site *** for domain ***.
0x0000169A 5786 Directory server replication cost.
0x00000169B  This global catalog server no longer automatically covers site '***' for forest '***'.
0x0000169C  ***
0x0000169D  ***
0x0000169E  ***
0x0000169F  ***
0x000016A0 5792 Directory server replication cost.
0x000016A1  This LDAP server no longer automatically covers site '***' for non-domain NC '***'.
0x000016A2 5794 Directory server replication cost.
0x000016A3  Domain "***" because this site was manually configured in the registry.
0x000016A4 5796 Directory server replication cost.
0x000016A5  Forest "***" because this site was manually configured in the registry.
0x000016A6  Configured directory server replication cost.
0x000016A7  Non-domain NC "***" because this site was manually configured in the registry.
0x000016A8  Collision.
0x000016A9  DsCrackNames-Status = 0x***, Crack-Fehler = 0x***.
0x000016AA  to the selected location object.
0x000016AB  ***
0x000016AC  This parameter was assigned the value 0x***.
0x000016AD  ***
0x000016AE  Entries from the file "SystemRoot\System32\Config\Netlogon.dns" in the DNS database.
0x000016AF  maximum size in bytes.
0x000016B0  "SystemRoot\System32\Config\Netlogon.dns" from the DNS database.
0x000016B1  service on this computer and verify that you no longer see this event log.
$00016B2  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Netlogon\Parameters\LogFileMaxSize
0x000016B3  Error value: ***
0x000016B4  Error value: ***
0x000016B5  registered in DNS. If the problem persists, please contact your domain administrator.
0x000016B6  Server not hosted.
0x000016B7  persists, please contact your domain administrator.
0x00001702  An attempt was made to perform an operation that is incompatible with the node's current membership status.
0x00001703  The quorum resource does not contain a quorum log.
0x00001704  The membership engine has requested a shutdown of the cluster service on this node.
0x00001705  The join operation failed because the cluster instance ID of the joining node does not match the cluster instance ID of the sponsor node.
0x00001706  A matching cluster network for the specified IP address could not be found.
0x0001707  The actual data type of the property does not match the expected data type of the property.
0x00001708  The cluster node was successfully removed from the cluster, but the node was not cleaned up. To determine which cleanup steps failed and how to recover, use the Event Viewer to view the failover clustering application event log.
0x0001709  Two or more parameter values specified for a resource's properties conflict.
0x00000170A  This computer cannot join a cluster.
0x00000170B  This computer cannot join a cluster because it does not have the correct version of Windows installed.
0x00000170C  A cluster cannot be created with the specified cluster name because that cluster name is already in use. Provide a different name for the cluster.
0x0000170D  The cluster configuration action has already been committed.
0x00000170E  The cluster configuration action could not be undone.
0x00000170F  The drive letter assigned to a system disk on one node conflicts with the drive letter assigned to a disk on another node.
0x00001710  One or more nodes in the cluster are running a version of Windows that does not support this operation.
0x00001711  The name of the corresponding computer account does not match the network name for this resource.
0x00001712  No network adapters available.
0x00001713  The cluster node has been poisoned.
0x00001714  The group cannot accept the request because it is migrating to another node.
0x00001715  The resource type cannot accept the request because it is too busy to perform another operation.
0x0001716  Timed out calling cluster resource dll.
0x00001717  The address is not valid for an IPv6 address resource. A global IPv6 address is required and must match a cluster network. Compatibility addresses are not allowed.
0x00001718  An internal cluster error has occurred. An attempt was made to call an invalid function.
0x00001719  A parameter value is outside of the acceptable range.
0x00000171A  A network error occurred while sending data to another node in the cluster. The number of bytes transferred was less than required.
0x0000171B  An invalid cluster registration operation was attempted.
0x00000171C  An input string was not properly terminated.
0x00000171D  An input string is not in a valid format for the data it represents.
0x00000171E  An internal cluster error has occurred. A cluster database transaction was attempted while a transaction was already in progress.
0x00000171F  An internal cluster error has occurred. An attempt was made to commit a cluster database transaction while no transaction was in progress.
0x00001720  An internal cluster error has occurred. Data was not properly initialized.
0x00001721  An error occurred while reading from a data stream. An unexpected number of bytes were returned.
0x00001722  An error occurred while writing to a data stream. The required number of bytes could not be written.
0x00001723  An error occurred while deserializing a stream of cluster data.
0x00001724  One or more property values for this resource conflict with one or more property values associated with the dependent resource(s).
0x00001725  A quorum of cluster nodes did not exist to form a cluster.
0x00001726  The cluster network is invalid for an IPv6 address resource or does not match the configured address.
0x00001727  The cluster network is not valid for an IPv6 tunnel resource. Check the configuration of the IP address resource on which the IPv6 tunnel resource depends.
0x00001728  Quorum resource cannot be in group 'Available Storage'.
0x00001729  The dependencies for this resource are nested too deeply.
0x00000172A  The call to the resource DLL threw an unhandled exception.
0x00000172B  The RHS process could not be initialized.
0x00000172C  The failover clustering feature is not installed on this node.
0x0000172D  The resources must be online on the same node for this operation
0x0000172E  A new node cannot be added because this cluster has already reached the maximum number of nodes.
0x00000172F  This cluster cannot be created because the specified number of nodes exceeds the maximum limit.
0x0001730  The attempt to use the specified cluster name failed because an enabled computer object with the specified name already exists in the domain.
0x00001731  This cluster cannot be destroyed. It has non-core application sets that must be deleted before the cluster can be destroyed.
0x00001732  The file share associated with the file share witness resource cannot be hosted by this cluster or any of its nodes.
0x00001733  If this is the last node in the cluster, the Destroy Cluster command should be used.
0x00001734  Only one instance of this resource type is allowed in the cluster.
0x00001735  Only one instance of this resource type is allowed per resource group.
0x00001736  The resource could not be brought online due to the failure of one or more provider resources.
0x00001737  The resource indicated that it cannot come online on any node.
0x00001738  The current operation cannot be performed on this group at this time.
0x00001739  The directory or file is not on a Cluster Shared Volume.
0x00000173A  The security descriptor does not meet the requirements for a cluster.
0x00000173B  These resources must be moved to available memory for the operation to succeed.
0x00000173C  Use Shared Volume APIs to perform the requested operation.
0x00000173D  Backup in progress. Please wait for the backup to complete before attempting this operation again.
0x00000173E  The path does not belong to a cluster shared volume.
0x00000173F  The Cluster Shared Volume is not locally mounted on this node.
0x00001740  Terminating the cluster watchdog.
0x00001770  The specified file could not be encrypted.
0x00001771  The specified file could not be decrypted.
0x00001772  The specified file is encrypted and the user cannot decrypt it.
0x00001773  There is no valid encryption recovery policy configured for this system.
0x00001774  The required encryption driver is not loaded for this system.
0x00001775  The file was encrypted with a different encryption driver than is currently loaded.
0x00001776  No EFS keys are defined for the user.
0x00001777  The specified file is not encrypted.
0x00001778  The specified file does not have the defined EFS export format.
0x00001779  The specified file is read-only.
0x00000177A  The directory has been disabled for encryption.
0x00000177B  The server is not trusted for the remote encryption process.
0x00000177C  The recovery policy configured for this system contains an invalid recovery certificate.
0x00000177D  The encryption algorithm used for the source file requires a larger key buffer than that for the target file.
$000177E  Die Festplattenpartition unterstützt keine Dateiverschlüsselung.
0x00000177F  This computer is disabled for file encryption.
0x00001780  A newer system is required to decrypt this encrypted file.
0x00001781  The remote server sent an invalid response for a file opened with Client Side Encryption.
0x00001782  The remote server does not support client-side encryption, even though it claims to support it.
0x00001783  The file is encrypted and should be opened in client-side encryption mode.
0x00001784  A new encrypted file will be created and a $EFS must be provided.
0x00001785  The SMB client requested a CSE FSCTL for a non-CSE file.
0x00001786  The requested operation was blocked by policy. Receive further information from your system administrator.
0x0000017E6  The list of servers for this workgroup is not available at this time
0x00001838  The Task Scheduler service must be configured to run under the System account to function properly. Individual tasks can be configured to run in other accounts.
0x0000019C8  The log service encountered an invalid log sector.
0x0000019C9  The log service encountered a log sector with invalid block parity.
0x00000019CA  The log service encountered a reallocated log sector.
0x000019CB 6603 The log service encountered a partial or incomplete log block.
0x00000019CC  The log service detected an attempt to access data outside of the active log range.
0x00000019CD  The protocol service user's marshaling buffers are exhausted.
0x00000019CE  The log service encountered a read attempt from a marshaling region with an invalid read context.
0x00000019CF  The log service encountered an invalid log restart range.
0x00000019D0  The log service encountered an invalid log block version.
0x0000019D1  The log service encountered an invalid log block.
0x0000019D2  The log service encountered an attempt to read the log with an invalid read mode.
0x0000019D3  The log service encountered a log stream with no restart range.
0x0000019D4  The logging service encountered a corrupt metadata file.
0x0000019D5  The log service encountered a metadata file that the log file system could not create.
0x0000019D6  The logging service encountered a metadata file with inconsistent data.
0x0000019D7  The log service encountered an attempt to erroneously allocate or deallocate reserved space.
0x0000019D8  The log service cannot delete the log file or file system container.
0x0000019D9  The log service has reached the maximum number of containers allocated to a log file.
0x00000019DA  The log service attempted to read or write backwards past the beginning of the log.
0x00000019DB  The log policy could not be installed because a policy of the same type already exists.
0x0000019DC  The log policy in question was not installed at the time of the request.
0x0000019DD  The installed policy set in the log is invalid.
0x000019DE  A policy for the protocol in question prevented the operation from completing.
0x00000019DF  Unable to reclaim log space because log is stuck by end of archive.
0x000019E0 6624 The log record is not a record in the log file.
0x000019E1  Number of reserved log records or adjustment of number of reserved log records is invalid.
0x000019E2  Reserved log space or log space adjustment is invalid.
0x0000019E3  A new or existing archive part or base of the active log is invalid.
0x0000019E4  Log space is full.
0x0000019E5  The log could not be set to the requested size.
0x000019E6 6630 The log is multiplexed, no direct writes to the physical log are allowed.
0x0000019E7  The operation failed because the log is a dedicated log.
0x0000019E8  The operation requires an archive context.
0x0000019E9  Log archiving in progress.
0x0000019EA  The operation requires a non-ephemeral log, but the log is ephemeral.
0x00000019EB  The log must contain at least two containers before it can be read or written to.
0x00000019EC  A protocol client has already registered with the stream.
0x00000019ED  A protocol client was not registered with the stream.
0x0000019EE  A request has already been made to handle the log full condition.
0x00000019EF  The log service encountered an error while attempting to read from a log container.
0x00000019F0  The log service encountered an error when attempting to write to a log container.
0x0000019F1  The log service encountered an error while attempting to open a log container.
0x0000019F2  The log service encountered an invalid container state while attempting a requested action.
0x0000019F3  The log service is not in the right state to perform a requested action.
0x0000019F4  Log space cannot be reclaimed because the log is frozen.
0x0000019F5  Failed to clear log metadata.
0x0000019F6  The security of the log and its containers is inconsistent.
0x0000019F7  Records were appended to the log or reservation changes were made, but the log could not be cleared.
0x00000019F8  The log is pinned because the reservation is consuming most of the log space. Release some reserved records to free up disk space.
0x00001A2C  The transaction handle associated with this operation is invalid.
0x00001A2D 6701 The requested operation was performed in the context of a transaction that is no longer active.
0x00001A2E 6702 The requested operation is not valid on the transaction object in its current state.
0x00001A2F  The caller invoked a response API, but the response is not expected because the TM did not issue the appropriate request to the caller.
0x00001A30  It is too late to perform the requested operation because the transaction has already been aborted.
0x00001A31  It is too late to perform the requested operation because the transaction has already been committed.
0x000001A32  The transaction manager could not be initialized successfully. Transaction operations are not supported.
0x00001A33  The specified ResourceManager has not made any changes or updates to the resource under this transaction.
0x000001A34  The resource manager attempted to prepare a transaction which it did not join successfully.
0x000001A35  The transaction object already has a parent and the caller attempted an operation that would have created a new parent. Only one supervisor entry is permitted.
0x000001A36  The RM tried to register a protocol that already exists.
0x00001A37 6711 The attempt to propagate the transaction failed.
0x000001A38  The requested propagation log was not registered as a CRM.
0x00001A39  The buffer passed to PushTransaction or PullTransaction is not in a valid format.
0x000001A3A  The current transaction context associated with the thread is not a valid handle to a transaction object.
0x00001A3B  The specified transaction object could not be opened because it could not be found.
0x000001A3C  The specified ResourceManager object could not be opened because it could not be found.
0x000001A3D  The specified enlistment object could not be opened because it could not be found.
0x00001A3E  The specified TransactionManager object could not be opened because it could not be found.
0x000001A3F  The specified object could not be created or opened because the associated TransactionManager is not online. The TransactionManager must be brought fully online by calling RecoverTransactionManager to recover the end of its log file before objects in its Transaction or ResourceManager namespaces can be opened. Additionally, failure to write records to its log file can cause a TransactionManager to go offline.
0x000001A40  The specified TransactionManager could not create the objects contained in its log file in the Ob namespace. Therefore, the TransactionManager could not be restored.
0x000001A41  The call to create a parent enlistment for this transaction object could not be completed because the transaction object specified for the enlistment is a child of the transaction. Only the root of the transaction can be entered as a manager.
0x00001A42  Because the associated transaction manager or resource manager has been closed, the handle is no longer valid.
0x00001A43  The specified operation could not be performed on this parent item because the item was not created with the appropriate completion response in the NotificationMask.
0x00001A44  The specified operation could not be performed because the record to log was too long. This can occur due to two conditions: either there are too many entries for this transaction, or the combined recovery information logged for those entries is too long.
0x000001A45  Implicit transactions are not supported.
0x000001A46  The kernel transaction manager had to abort or forget the transaction because it was blocking progress.
0x000001A47  The provided TransactionManager identity did not match the identity recorded in the TransactionManager log file.
0x00001A48  This snapshot operation cannot continue because a transactional resource manager cannot be frozen in its current state. Please try again.
0x000001A49  The transaction cannot be enlisted with the specified EnlistmentMask because the transaction has already completed the PrePrepare phase. To ensure correctness, the resource manager must enter a write-through mode and stop caching data within this transaction. Registration because only subsequent transaction phases can still be successful.
0x000001A4A  The transaction has no parent record.
0x00001A4B 6731 The attempt to commit the transaction was completed, but it is possible that part of the transaction tree was not successfully committed due to heuristics. Therefore, it is possible that some data changed in the transaction may not have been committed, resulting in a transaction inconsistency. If possible, check the consistency of the associated data.
0x00001A90  The function attempted to use a name reserved for use by another transaction.
0x00001A91  Transaction support within the specified resource manager has not started or has shut down due to an error.
0x000001A92  The metadata of the RM has been corrupted. The RM doesn't work.
0x00001A93  The specified directory does not contain a resource manager.
0x00001A95  The remote server or share does not support transactional file operations.
0x00001A96  The requested log size is invalid.
0x00001A97  The object (file, stream, link) corresponding to the handle was deleted by a transaction savepoint rollback.
0x00001A98  The specified file mini version was not found for this open transaction file.
0x00001A99  The specified file mini version was found but invalidated. The most likely cause is a transaction savepoint rollback.
0x00001A9A  A mini version can only be opened in the context of the transaction that created it.
0x000001A9B  Unable to open mini version with edit access.
0x00001A9C  Unable to create more mini versions for this stream.
0x00001A9E  The remote server sent a mismatched version number or fid for a transactionally open file.
0x00001A9F  The handle was invalidated by a transaction. The most likely cause is the existence of a memory allocation for a file or an open handle when the transaction ended or rolled back to the savepoint.
0x000001AA0  There is no transaction metadata in the file.
0x000001AA1  The log data is corrupt.
0x000001AA2  The file cannot be restored because a handle to it is still open.
0x000001AA3  The transaction result is not available because the resource manager responsible for it has disconnected.
0x000001AA4  The request was denied because the entry in question is not a parent entry.
0x000001AA5  The transactional resource manager is already consistent. A recovery is not required.
0x000001AA6  The transactional resource manager has already started.
0x000001AA7  The file cannot be opened transactionally because its identity depends on the outcome of an unresolved transaction.
0x000001AA8  The operation cannot be performed because another transaction depends on this property not changing.
0x000001AA9  The operation would affect a single file with two transactional resource managers and is therefore not allowed.
0x00001AAA  The $Txf directory must be empty for this operation to succeed.
0x00001AAB  The operation would leave a transactional resource manager in an inconsistent state and is therefore not allowed.
0x000001AAC  The operation could not be completed because the transaction manager has no history.
0x000001AAD  A rollback could not be scheduled because a previously scheduled rollback has already run or is queued to run.
0x000001AAE  The transactional metadata attribute for the file or directory is corrupt and unreadable.
0x000001AAF  The encryption process could not be completed because a transaction is active.
0x000001AB0  This object may not be opened in a transaction.
0x000001AB1  An attempt to create space in the Transaction Resource Manager log failed. The error status was recorded in the event log.
0x00001AB2 6834 Memory allocation (creating an allocated section) of a remote file under a transaction is not supported.
0x000001AB3  Transaction metadata already exists in this file and cannot be replaced.
0x000001AB4  A transaction scope could not be entered because the scope handler was not initialized.
0x000001AB5  A promotion was required for the resource manager to log on, but the transaction was set to not allow it.
0x00001AB6 6838 This file is open for modification in an unresolved transaction and can only be opened for execution by a transaction reader.
0x000001AB7  The request to unfreeze frozen transactions was ignored because transactions were not previously frozen.
0x00001AB8 6840 Transactions cannot be frozen because a freeze is already in progress.
0x000001AB9  The target volume is not a snapshot volume. This operation is only valid on a snapshot mounted volume.
0x000001ABA  The savepoint operation failed because there are files open in the transaction. This is not allowed.
0x00001ABB  Windows detected corruption in a file and this file has since been repaired. Data loss may have occurred.
0x000001ABC  The sparse operation could not be completed because a transaction is active on the file.
0x00001ABD  The call to create a TransactionManager object failed because the Tm identity stored in the log file does not match the Tm identity passed as an argument.
0x00001ABE  I/O was attempted on a section object that was terminated as a result of a transaction. There is no valid data.
0x000001ABF  The transactional resource manager may fail due to a transient condition such as B. low resources do not currently accept transactional work.
0x000001AC0  The transactional resource manager had too many outstanding transactions that could not be canceled. The transactional resource manager has shut down.
0x000001AC1  The operation could not be completed due to bad clusters on the hard disk.
0x000001AC2  The compression process could not be completed because a transaction is active on the file.
0x000001AC3  The operation could not be completed because the volume is dirty. Please run chkdsk and try again.
0x000001AC4  The link tracking process could not be completed because a transaction is active.
0x00001AC5  This operation cannot be performed in a transaction.
0x000001AC6  The handle is no longer properly associated with its transaction. It may have been opened in a transactional resource manager, which was subsequently forced to restart. Please close the handle and open a new one.
0x00001AC7  The specified operation could not be performed because the resource manager is not enlisted in the transaction.
0x0000001B  The drive cannot find the requested sector.
0x00001B59  The specified session name is invalid.
0x000001B5A  The specified protocol driver is invalid.
0x00001B5B  The specified protocol driver was not found in the system path.
0x000001B5C  The specified terminal connection driver was not found in the system path.
0x000001B5D  A registry key for event logging could not be created for this session.
0x00001B5E  A service with the same name already exists on the system.
0x00001B5F 7007 A close is pending for the session.
0x000001B60  There are no free output buffers available.
0x00001B61  The MODEM.INF file was not found.
0x00001B62  The modem name was not found in MODEM.INF.
0x000001B63  The modem did not accept the sent command. Make sure the configured modem name matches the attached modem.
0x00001B64  The modem did not respond to the command sent. Make sure the modem is properly cabled and powered on.
0x00001B65 7013 Carrier detection failed or the carrier was dropped due to a connection loss.
0x00001B66  Dial tone was not detected within the required time. Make sure the phone cord is properly connected and working.
0x00001B67  Busy tone detected at remote site when calling back.
0x000001B68  Voice detected on remote site callback.
0x00001B69  Transport driver error
0x00001B6E  The specified session cannot be found.
0x00001B6F  The specified session name is already in use.
0x000001B70  The task you are trying to perform cannot be completed because Remote Desktop Services is currently busy. Please try again in a few minutes. Other users should still be able to log in.
0x00001B71  An attempt was made to connect to a session whose video mode is not supported by the current client.
0x000001B7B  The application attempted to enable DOS graphics mode. DOS graphics mode is not supported.
0x000001B7D  Your interactive logon privilege has been disabled. Please contact your administrator.
0x00001B7E  The requested operation can only be performed on the system console. This is most often the result of a driver or system DLL that requires direct console access.
0x00001B80  The client could not reply to the server connection message.
0x000001B81  Disconnecting the console session is not supported.
0x000001B82  Reconnecting a disconnected session to the console is not supported.
0x00001B84  The request to remotely control another session was denied.
0x00001B85  The requested session access was denied.
0x00001B89  The specified terminal connection driver is invalid.
0x00001B8A  This may be because the session has been disconnected or no user is currently logged in.
0x000001B8B  The requested session is not configured to allow remote control.
0x00001B8C  Your request to connect to this terminal server was denied. Your terminal server client license number is currently being used by another user. Please contact your system administrator for a unique license number.
0x00001B8D  Your request to connect to this terminal server was denied. Your terminal server client license number has not been entered for this copy of the terminal server client. Please contact your system administrator.
0x00001B8E  The number of connections to this computer is limited and all connections are currently in use. Try connecting later or contact your system administrator.
0x000001B8F  The client you are using is not licensed to use this system. Your sign-up request is denied.
0x000001B90  The system license has expired. Your sign-up request is denied.
0x00001B91  Remote control could not be terminated because the specified session is not currently being remote controlled.
0x000001B92  Remote control of the console has ended because the display mode has changed. Changing the display mode in a remote control session is not supported.
0x000001B93  Activation has already been reset as many times as possible for this installation. Your activation timer will not be deleted.
0x000001B94  Remote logins are currently disabled.
0x000001B95  You do not have the correct level of encryption to access this session.
0x00001B96  The user s\\s is currently logged on to this computer. Only the current user or an administrator can log on to this computer.
0x00001B97  The user s\\s is already logged on to this computer's console. You currently do not have permission to log in. To resolve this issue, contact s\\s and have them unsubscribe.
0x00001B98 7064 You cannot sign in due to an account restriction.
0x00001B9A  The client drive mapping service established a terminal connection.
0x00001B9B  Client Drive Mapping service disconnected on terminal connection.
0x00001B9C  The security layer of the terminal server detected an error in the log stream and disconnected the client.
0x00001B9D  The target session is incompatible with the current session.
0x000001B9E  Windows cannot connect to your session because there is a problem in the Windows video subsystem. Try connecting again later, or contact the server administrator for assistance.
0x00001F41  The File Replication Service API was incorrectly called.
0x00001F42  The file replication service cannot be started.
0x00001F43  The file replication service cannot be stopped.
0x000001F44  The File Replication Service API terminated the request. The event log may contain more information.
0x00001F45  The file replication service ended the request. The event log may contain more information.
0x00001F46  The file replication service cannot be contacted. The event log may contain more information.
0x00001F47  The file replication service cannot fulfill the request because the user does not have sufficient privileges. The event log may contain more information.
0x00001F48  File Replication Service cannot fulfill the request because authenticated RPC is not available. The event log may contain more information.
0x00001F49  The File Replication Service cannot fulfill the request because the user does not have sufficient permissions on the domain controller. The event log may contain more information.
0x000001F4A  File Replication Service cannot fulfill the request because authenticated RPC is not available on the domain controller. The event log may contain more information.
0x000001F4B  The file replication service cannot communicate with the file replication service on the domain controller. The event log may contain more information.
0x000001F4C  The file replication service on the domain controller cannot communicate with the file replication service on this computer. The event log may contain more information.
0x000001F4D  The file replication service cannot fill the system volume due to an internal error. The event log may contain more information.
0x000001F4E  File Replication Service cannot fill the system volume due to an internal timeout. The event log may contain more information.
0x000001F4F  The file replication service cannot process the request. The system disk is busy with a previous request.
0x000001F50  The file replication service cannot complete replication of the system volume due to an internal error. The event log may contain more information.
0x00001F51  The file replication service encountered an invalid parameter.
0x00002008  An error occurred installing the directory service. See the event log for more information.
0x00002009  The directory service evaluated group memberships locally.
0x0000200A  The specified directory service attribute or value does not exist.
0x00000200B  The attribute syntax specified for the directory service is invalid.
0x0000200C  The attribute type specified for the directory service is not defined.
0x00000200D  The specified directory service attribute or value already exists.
0x00000200E  The directory service is busy.
0x00000200F  The directory service is not available.
0x00002010  The directory service could not assign a relative ID.
0x00002011  The directory service has exhausted the pool of relative identifiers.
0x00002012  The requested operation could not be performed because the directory service is not the master for this type of operation.
0x00002013  The directory service could not initialize the subsystem that allocates relative identifiers.
0x00002014  The requested operation failed to satisfy one or more constraints associated with the object's class.
0x00002015  The directory service can only perform the requested operation on a leaf object.
0x00002016  The directory service cannot perform the requested operation on an object's RDN attribute.
0x00002017  The directory service detected an attempt to change the object class of an object.
0x00002018  The requested cross-domain move operation could not be performed.
0x00002019  The global catalog server cannot be contacted.
0x00000201A  The policy object is released and can only be modified at the root.
0x0000201B  The policy object does not exist.
0x00000201C  The requested policy information is only in the directory service.
0x0000201D  A domain controller promotion is currently active.
0x00000201E  A domain controller promotion is not currently active
0x00002020  An operational error has occurred.
0x00002021  A protocol error has occurred.
0x00002022  This request has timed out.
0x00002023  The size limit for this request has been exceeded.
0x00002024  The administrative limit for this request has been exceeded.
0x00002025  The comparison response was incorrect.
0x00002026  The comparison response was true.
0x00002027  The requested authentication method is not supported by the server.
0x00002028  This server requires a more secure authentication method.
0x00002029  Improper authentication.
0x0000202A  The authentication mechanism is unknown.
0x00000202B  A recommendation was returned from the server.
0x00000202C  The server does not support the requested critical extension.
0x00000202D  This request requires a secure connection.
0x0000202E  Improper matching.
0x0000202F 8239 A constraint violation has occurred.
0x00002030  There is no such object on the server.
0x00002031  There is an alias problem.
0x00002032  Invalid DNS syntax was specified.
0x00002033  The object is a leaf object.
0x00002034  There is an alias dereference issue.
0x00002035  The server is not ready to process the request.
0x00002036  A loop was detected.
0x00002037  There is a name violation.
0x00002038  The result set is too large.
0x00002039  The operation affects multiple DSAs
0x00000203A  The server is not operational.
0x00000203B  A local error has occurred.
0x00000203C  An encoding error has occurred.
0x00000203D  A decoding error has occurred.
0x00000203E  The search filter cannot be recognized.
0x00000203F  One or more parameters are invalid.
0x00002040  The specified method is not supported.
0x00002041  No results were returned.
0x0002042  The specified control is not supported by the server.
0x00002043  A referral loop was detected by the client.
0x00002044  The default referral limit has been exceeded.
0x00002045  Search requires a SORT control.
0x00002046  The search results exceed the specified offset range.
0x0000206D  The base object must be the head of a naming context. The root object cannot have an instantiated parent object.
0x0000206E  The operation to add a replica cannot be performed. The naming context must be writable to create the replica.
0x0000206F  A reference to an attribute not defined in the schema occurred.
0x00002070  The maximum size of an object has been exceeded.
0x0002071  An attempt was made to add an object to the directory with a name that is already in use.
0x00002072  An attempt was made to add an object to a class that has no RDN defined in the schema.
0x00002073  An attempt was made to add an object with an RDN that is not the RDN defined in the schema.
0x00002074  None of the requested attributes were found on the objects.
0x00002075  The user buffer is too small.
0x00002076  The attribute specified in the operation does not exist on the object.
0x00002077  Illegal modify operation. Some aspects of modification are not allowed.
0x00002078  The specified object is too large.
0x0002079  The specified instance type is invalid.
0x00000207A  The operation must be performed on a master DSA.
0x0000207B  The object class attribute must be specified.
0x0000207C  A required attribute is missing.
0x0000207D  An attempt was made to modify an object so that it contains an attribute that is not allowed for its class.
0x0000207E  The specified attribute already exists in the object.
0x00002080  The specified attribute does not exist or has no values.
0x00002081  Multiple values were specified for an attribute that can only have one value.
0x00002082  A value for the attribute was not within the acceptable range of values.
0x00002083  The specified value already exists.
0x00002084  The attribute cannot be removed because it does not exist on the object.
0x00002085  The attribute value cannot be removed because it does not exist on the object.
0x00002086  The specified base object cannot be a sub-reference.
0x00002087 8327 Concatenation is not allowed.
0x00002088  Chained evaluation is not allowed.
0x0002089  The operation could not be performed because the object's parent was either not instantiated or deleted.
0x00000208A  A parent that is an alias is not allowed. Aliases are leaf objects.
0x0000208B  The object and parent must be of the same type, either both masters or both replicas.
0x0000208C  The operation cannot be performed because there are child objects. This operation can only be performed on a leaf object.
0x0000208D  Directory object not found.
0x0000208E  The alias object is missing.
0x00000208F  The object name has an incorrect syntax.
0x00002090  An alias is not allowed to refer to another alias.
0x00002091  The alias cannot be dereferenced.
0x00002092  The operation is out of scope.
0x00002093  The operation cannot continue because the object is being removed.
0x00002094  The DSA object cannot be deleted.
0x00002095  A directory service error has occurred.
0x00002096  The operation can only be performed on an internal master DSA object.
0x00002097  The object must belong to the DSA class.
0x00002098  Insufficient privileges to perform the operation.
0x00002099  The object cannot be added because the parent object is not on the list of possible parents.
0x0000209A  Access to the attribute is not allowed because the attribute is owned by the Security Accounts Manager (SAM).
0x00000209B  The name has too many parts.
0x0000209C  The name is too long.
0x0000209D  The name value is too long.
0x0000209E  The directory service encountered an error parsing a name.
0x0000209F  The directory service cannot get the attribute type for a name.
0x000020A0  The name does not identify an object; the name identifies a phantom.
0x0000020A1  The security descriptor is too short.
0x0000020A2  The security descriptor is invalid.
0x0000020A3  Error creating name for deleted object.
0x0000020A4  The parent of a new child reference must exist.
0x0000020A5  The object must be a naming context.
0x000020A6  It is not allowed to add an attribute owned by the system.
0x0000020A7  The object's class must be structural; You cannot instantiate an abstract class.
0x0000020A8  The schema object could not be found.
0x0000020A9  A local object with this GUID (dead or alive) already exists.
0x0000020AA  The operation cannot be performed on a backlink.
0x0000020AB  The cross reference for the specified naming context could not be found.
0x0000020AC  The operation could not be performed because the directory service is shutting down.
0x0000020AD  The directory service request is invalid.
0x0000020AE  The role owner attribute could not be read.
0x0000020AF  The requested FSMO operation failed. The current FSMO holder could not be contacted.
0x000020B0 8368 Changing a DN via a naming context is not allowed.
0x0000020B1  The attribute cannot be changed because it is owned by the system.
0x0000020B2  Only the replicator can perform this function.
0x0000020B3  The specified class is not defined.
0x0000020B4  The specified class is not a subclass.
0x0000020B5  The name reference is invalid.
0x000020B6  A cross reference already exists.
0x000020B7  It is not allowed to delete a master cross reference.
0x000020B8 8376 Subtree notifications are only supported on NC heads.
0x0000020B9  Notification filter is too complex.
0x00000020BA  Schema update failed: duplicate RDN.
0x00000020BB  Schema update failed: duplicate OID.
0x0000020BC  Schema update failed: duplicate MAPI ID.
0x0000020BD  Schema update failed: duplicate schema id guid.
0x00000020BE  Schema update failed: duplicate LDAP display name.
0x000020BF  Schema update failed: lower range smaller than upper range.
0x0000020C0  Schema update failed: syntax conflict.
0x0000020C1  Schema deletion failed: Attribute used in must contain
0x0000020C2  Schema deletion failed: attribute is used in may container
0x0000020C3  Schema update failed: attribute in may-contain does not exist.
0x0000020C4  Schema update failed: attribute in must-contain does not exist.
0x0000020C5  Schema update failed: class in helper class list does not exist or is not a helper class.
0x0000020C6  Schema update failed: class in Poss-Superiors does not exist.
0x0000020C7  Schema update failed: Class in subclass list does not exist or does not meet hierarchy rules.
0x0000020C8  Schema update failed: Rdn-Att-Id has incorrect syntax.
0x0000020C9  Failed to delete schema: class is used as helper class.
0x000020CA Failed to delete schema: Class is used as a subclass.
0x000020CB  Failed to delete schema: Class is used as Poss Superior.
0x000020CC 8396 Schema update failed recalculating validation cache.
0x000020CD 8397 Tree deletion is not yet complete. The request must be made again to continue deleting the tree.
0x0000020CE  The requested delete operation could not be performed.
0x00000020CF  Unable to read the governance class identifier for the schema record.
0x0000020D0  The attribute schema has bad syntax.
0x0000020D1  The attribute could not be cached.
0x0000020D2  The class could not be cached.
0x0000020D3  The attribute could not be removed from the cache.
0x0000020D4  The class could not be removed from the cache.
0x0000020D5  The distinguished name attribute could not be read.
0x0000020D6  No parent reference has been configured for the directory service. Therefore, the directory service cannot issue references to objects outside of this forest.
0x0000020D7  The instance type attribute could not be retrieved.
0x000020D8  An internal error has occurred.
0x0000020D9  A database error has occurred.
0x000020DA  The GOVERNSID attribute is missing.
0x0000020DB  An expected attribute is missing.
0x0000020DC  The specified naming context is missing a cross reference.
0x000020DD 8413 A security verification error has occurred.
0x000020DE  The schema is not loaded.
0x0000020DF  Schema mapping failed. Please check if the computer is low on memory.
0x00000020E0  The required syntax for the attribute schema could not be obtained.
0x0000020E1  Verification of the global catalog failed. The global catalog is not available or does not support the operation. Part of the directory is currently unavailable.
0x0000020E2  The replication operation failed due to a schema mismatch between the servers involved.
0x0000020E3  The DSA object could not be found.
0x0000020E4  The naming context could not be found.
0x0000020E5  The naming context could not be found in the cache.
0x0000020E6  The child object could not be retrieved.
0x000020E7  The change was not allowed for security reasons.
0x0000020E8  The operation cannot replace the hidden record.
0x0000020E9  The hierarchy file is invalid.
0x0000020EA  The attempt to create the hierarchy table failed.
0x0000020EB  The directory configuration parameter is missing from the registry.
0x0000020EC  An attempt to count the address book indexes failed.
0x000020ED 8429 The mapping of the hierarchy table failed.
0x0000020EE  The directory service encountered an internal error.
0x00000020EF  The directory service encountered an unknown error.
0x000020F0 8432 A root object requires a class of "Top".
0x0000020F1  This directory server is shutting down and cannot accept new floating single master operational roles.
0x0000020F2  The directory service is missing mandatory configuration information and is unable to determine ownership of floating single master operational roles.
0x0000020F3  The directory service could not transfer ownership of one or more flexible single master operational roles to other servers.
0x0000020F4  The replication operation failed.
0x0000020F5  An invalid parameter was specified for this replication operation.
0x0000020F6  The directory service is too busy to complete the replication process at this time.
0x0000020F7  The Distinguished Name specified for this replication operation is invalid.
0x0000020F8  The naming context specified for this replication operation is invalid.
0x0000020F9  The distinguished name specified for this replication operation already exists.
0x00000020FA  The replication system encountered an internal error.
0x00000020FB  The replication process encountered a database inconsistency.
0x0000020FC  The server specified for this replication operation could not be contacted.
0x00000020FD  The replication process encountered an object with an invalid instance type.
0x0000020FE  The replication process could not allocate memory.
0x00000020FF  The replication process encountered an error in the mail system.
0x00002100  The replication reference information for the target server already exists.
0x00002101  The replication reference information for the target server does not exist.
0x00002102  The naming context cannot be removed because it is being replicated to another server.
0x00002103  The replication process encountered a database error.
0x00002104  The naming context is in the process of being removed or not being replicated from the specified server.
0x00002105  Replication access was denied.
0x00002106  The requested operation is not supported by this version of the directory service.
0x00002107  The replication remote procedure call was aborted.
0x00002108  The source server is currently refusing replication requests.
0x00002109  The target server is currently refusing replication requests.
0x00000210A  The replication operation failed due to an object name collision.
0x00000210B  The replication source has been reinstalled.
0x0000210C  The replication operation failed because a required parent is missing.
0x0000210D  The replication process ended prematurely.
0x00000210E  The replication synchronization attempt was aborted due to missing updates.
0x00000210F  The replication process has ended because the system is shutting down.
0x00002110  The sync attempt failed because the target DC is currently waiting to sync new partial attributes from the source. This condition is normal when a recent schema change changed the partial attribute set. The target partial attribute set is not a subset of the source partial attribute set.
0x00002111  The replication sync attempt failed because a master replica attempted to sync from a partial replica.
0x0002112  The server specified for this replication operation was contacted, but this server was unable to contact an additional server required to complete the operation.
0x00002113  The source forest directory service schema version is incompatible with the directory service version on this computer.
0x00002114  Schema update failed: an attribute with the same link id already exists.
0x0002115  Name translation: General processing error.
0x00002116  Name translation: The name could not be found or the right to view the name is insufficient.
0x00002117  Name translation: input name mapped to more than one output name.
0x00002118  Name translation: input name found but not the associated output format.
0x00002119  Name translation: cannot fully resolve, only domain found.
0x00000211A  Name translation: It is not possible to do a purely syntactical mapping on the client without going to the line.
0x00000211B  Changing a constructed attribute is not allowed.
0x0000211C  The specified OM object class is incorrect for an attribute with the specified syntax.
0x0000211D  The replication request was sent; waiting for answer.
0x00000211E  The requested operation requires a directory service and none was available.
0x00000211F  The class or attribute LDAP friendly name contains non-ASCII characters.
0x00002120  The requested search operation is only supported for basic searches.
0x00002121  The search could not retrieve attributes from the database.
0x00002122  The schema update operation attempted to add a reverse link attribute that does not have a corresponding forward link.
0x00002123  The source and destination of a cross-domain move do not match on the object's epoch number. Source or destination does not have the latest version of the object.
0x00002124  The source and target of a cross-domain move do not match the current name of the object. Source or destination does not have the latest version of the object.
0x00002125  The source and target for the cross-domain move operation are the same. The caller should use the local move operation instead of the cross-domain move operation.
0x00002126  The source and target for a cross-domain move do not match across the forest naming contexts. Either the source or the destination does not have the latest version of the partition container.
0x00002127  The target of a cross-domain move is irrelevant to the target naming context.
0x00002128  The source and target of a cross-domain move do not match the identity of the source object. Source or destination does not have the latest version of the source object.
0x00002129  Object being moved between domains has already been deleted from destination server. The source server does not have the latest version of the source object.
0x00000212A  Another operation that requires exclusive access to the PDC FSMO is already in progress.
0x00000212B  A cross-domain move operation failed, resulting in two versions of the moved object - one each in the source and destination domains. The target object must be removed to bring the system back to a consistent state.
0x0000212C  This object is not allowed to be moved across domains because either cross-domain moves are not allowed for this class or the object has some special characteristics, e.g. B.: Trusted account or restricted RID preventing its movement.
0x0000212D  Objects with memberships cannot be moved across domain boundaries as this would violate the account group membership terms. Remove the object from all account group memberships and try again.
0x00000212E  A naming context header must be the immediate child of another naming context header, not an interior node.
0x00000212F  The directory cannot validate the proposed naming context because it does not contain a replica of the naming context over the proposed naming context. Ensure that the domain naming master role is held by a server that is configured as a global catalog server and that the server is up to date with its replication partners. (Applies only to Windows 2000 domain naming masters)
0x00002130  The target domain must be in native mode.
0x00002131  The operation cannot be performed because the server does not have an infrastructure container in the requested domain.
0x00002132  Cross-domain move of non-empty account groups is not allowed.
0x00002133  Cross-domain move of non-empty resource groups is not allowed.
0x00002134  The search flags for the attribute are invalid. The ANR bit is only valid for attributes of Unicode or Teletex strings.
0x00002135 8501 Tree deletes starting at an object that has an NC head as a descendant are not allowed.
0x00002136  The directory service could not lock a tree in preparation for deleting a tree because the tree was in use.
0x00002137  The directory service could not identify the list of objects to delete when attempting to delete the tree.
0x00002139  Only an administrator can change the membership list of an administrative group.
0x0000213A  The primary group ID of a domain controller account cannot be changed.
0x0000213B  An attempt was made to change the base schema.
0x0000213C  Adding a new mandatory attribute to an existing class, deleting a mandatory attribute from an existing class, or adding an optional attribute to the special class Top that is not a backlink attribute (directly or through inheritance, e.g. by adding or deleting a subclass) is not allowed.
0x00000213D  Schema update is not allowed on this DC because the DC does not own the schema FSMO role.
0x0000213E  Cannot create an object of this class under the schema container. You can only create attribute schema and class schema objects under the schema container.
0x00000213F  The replica/child installation failed to get the objectVersion attribute for the schema container on the source DC. Either the attribute is missing from the schema container or the credentials provided do not have permission to read it.
0x0002140  The replica/child installation failed to read the objectVersion attribute in the SCHEMA section of the schema.ini file in the system32 directory.
0x00002141  The specified group type is invalid.
0x00002142  You cannot nest global groups in a mixed domain if the group is security-enabled.
0x00002143  You cannot nest local groups in a mixed domain if the group is security-enabled.
0x00002144  A global group cannot have a local group as a member.
0x00002145  A global group cannot have a universal group as a member.
0x00002146  A universal group cannot have a local group as a member.
0x00002147  A global group cannot have a cross-domain member.
0x00002148  A local group cannot have another cross-domain local group as a member.
0x00002149  A group with primary members cannot be changed to a security-disabled group.
0x00000214A  The schema cache load failed to convert the string default SD for a class schema object.
0x00000214B  Only DSAs that are configured as global catalog servers should be allowed to assume the FSMO role of Domain Naming Master. (Applies to Windows 2000 Server only)
0x00000214C  The DSA operation cannot continue due to a DNS lookup error.
0x0000214D  While processing a DNS hostname change for an object, the service principal name values could not be kept in sync.
0x00000214E  The security descriptor attribute could not be read.
0x00000214F  The requested object was not found, but an object with this key was found.
0x00002150  The syntax of the added linked attribute is incorrect. Forward links can only have syntax 184.108.40.206, 220.127.116.11 and 18.104.22.168, and backlinks can only have syntax 22.214.171.124
0x00002151  Security Account Manager needs to retrieve power-on password.
0x00002152  Security Account Manager needs to retrieve startup key from floppy disk.
0x00002153  The directory service cannot be started.
0x00002154  Directory services could not be started.
0x00002155  The connection between client and server requires packet privacy or better.
0x00002156  The source domain may not be in the same forest as the destination.
0x00002157  The target domain must be in the forest.
0x00002158  The operation requires that target domain monitoring be enabled.
0x00002159  The operation could not find a domain controller for the source domain.
0x00000215A  The source object must be a group or a user.
0x0000215B  The source object's SID already exists in the target forest.
0x00000215C  Source and target object must be of the same type.
0x00000215E  Schema information could not be included in the replication request.
0x00000215F  The replication operation could not be completed due to a schema incompatibility.
0x00002160  The replication operation could not be completed due to a previous schema incompatibility.
0x00002161  The replication update could not be applied because either the source or the target has not yet received information about a recent cross-domain move operation.
0x00002162  The requested domain could not be deleted because there are still domain controllers hosting this domain.
0x0002163  The requested operation can only be performed on a global catalog server.
0x00002164  A local group can only be a member of other local groups in the same domain.
0x00002165  Foreign security principals cannot be members of universal groups.
0x00002166  The attribute must not be replicated to the GC for security reasons.
0x00002167 8551 The checkpoint with the PDC could not be taken because too many changes are currently being processed.
0x00002168  The operation requires source domain monitoring to be enabled.
0x00002169  Security principal objects can only be created within domain naming contexts.
0x00000216A  A Service Principal Name (SPN) could not be created because the provided hostname is not in the required format.
0x0000216B  A filter was passed using constructed attributes.
0x0000216C  The value of the UnicodePwd attribute must be enclosed in double quotes.
0x00000216D  Your computer could not be joined to the domain. You have exceeded the maximum number of computer accounts you are allowed to create in this domain. Contact your system administrator to have this limit reset or increased.
0x0000216E  For security reasons, the operation must be performed on the target DC.
0x00000216F  For security reasons, the source DC must be NT4SP4 or higher.
0x00002170  Critical directory service system objects cannot be deleted during tree delete operations. Tree deletion may have been partially completed.
0x00002173  The operating system version is incompatible with the current functional level of the AD DS forest or the functional level of the AD LDS configuration set. You must upgrade to a new version of the operating system before this server can become an AD DS domain controller or add an AD LDS instance in this AD DS forest or AD LDS configuration set.
0x00002174  The version of the installed operating system is incompatible with the current domain functional level. You must upgrade to a new version of the operating system before this server can become a domain controller in this domain.
0x00002175  The version of the operating system installed on this server no longer supports the current functional level of the AD DS forest or the functional level of the AD LDS configuration set. You must raise the functional level of the AD DS forest or AD LDS configuration set before this server can become an AD DS domain controller or an AD LDS instance in that forest or configuration set.
0x00002176  The version of the operating system installed on this server no longer supports the current domain functional level. You must raise the domain functional level before this server can become a domain controller in this domain.
0x00002177  The version of the operating system installed on this server is incompatible with the functional level of the domain or forest.
0x00002178  The domain (or forest) functional level cannot be raised to the requested value because there are one or more domain controllers in the domain (or forest) that are at a lower, incompatible functional level.
0x00002179  The forest functional level cannot be raised to the requested value because at least one domain is still in mixed domain mode. All domains in the forest must be in native mode before you can increase the functional level of the forest.
0x00000217A  The requested sort order is not supported.
0x0000217B  The requested name already exists as a unique identifier.
0x0000217C  The machine account was created before NT4. The account needs to be recreated.
0x0000217D  The database is out of version storage.
0x00000217E  The operation cannot continue because multiple conflicting controls were used.
0x00000217F  A valid security descriptor reference domain could not be found for this partition.
0x00002180  Schema update failed: the link ID is reserved.
0x00002181  Schema update failed: no link IDs are available.
0x00002182  An account group cannot have a universal group as a member.
0x00002183  Rename or move operations on naming context headers or read-only objects are not allowed.
0x0002184  Move operations on objects in schema naming context are not allowed.
0x00002185  A system flag has been set on the object and does not allow the object to be moved or renamed.
0x00002186  This object is not allowed to change its grandparent container. Moves are not forbidden on this object, but are restricted to sibling containers.
0x00002187  Cannot resolve fully, generating a reference to another forest.
0x00002188  The requested action is not supported on standard servers.
0x0002189  A directory service partition on a remote server could not be accessed. Make sure at least one server is running for the partition in question.
0x00000218A  The directory cannot validate the proposed naming context name (or partition name) because it neither contains nor can contact a replica of the naming context above the proposed naming context. Please ensure that the parent naming context is properly registered in DNS and that at least one copy of this naming context is reachable from the domain naming master.
0x0000218B  The thread limit for this request has been exceeded.
0x0000218C  The global catalog server is not in the closest location.
0x00000218D  The DS cannot derive a service principal name (SPN) that is used to mutually authenticate the target server because the corresponding server object in the local DS database does not have a serverReference attribute.
0x00000218E  The directory service could not enable single-user mode.
0x00000218F  The directory service cannot parse the script because of a syntax error.
0x00002190  The directory service cannot process the script because of an error.
0x00002191  The directory service cannot perform the requested operation because the servers involved are from different replication epochs (usually related to an ongoing domain rename).
0x00002192  The directory service binding needs to be renegotiated due to a change in server extension information.
0x00002193  Operation not allowed on a disabled locator.
0x00002194  Schema update failed: no values available for msDS-IntId.
0x00002195  Schema update failed: Duplicate msDS INtId. Repeat the process.
0x00002196  Schema deletion failed: attribute is used in rDNAttID.
0x00002197  The directory service could not authorize the request.
0x00002198  The directory service cannot process the script because it is invalid.
0x00002199  The remote create cross reference operation failed on the domain naming master FSMO. The error of the operation is in the extended data.
0x00000219A  A cross reference is used locally with the same name.
0x00000219B  The DS cannot derive a Service Principal Name (SPN) that allows the target server to be mutually authenticated because the server's domain has been deleted from the forest.
0x0000219C 8604 Writable NCs prevent this DC from being demoted.
0x0000219D  The requested object has a non-unique identifier and cannot be retrieved.
0x00000219E  Insufficient attributes were specified to create an object. This object may not exist because it may have been deleted and already been garbage collected.
0x00000219F  The group cannot be converted due to attribute restrictions for the requested group type.
0x000021A0 8608 Cross-domain move of non-empty base application groups is not allowed.
0x00000021A1  Moving non-empty query-based application sets across domains is not allowed.
0x0000021A2  Ownership of the FSMO role could not be verified because its directory partition was not successfully replicated with at least one replication partner.
0x0000021A3  The target container for a known object container redirection cannot already be a special container.
0x0000021A4  The directory service cannot perform the requested operation because a domain rename is in progress.
0x0000021A5  The directory service detected a child partition under the requested partition name. The partition hierarchy must be created in a top-down method.
0x0000021A6  The directory service cannot replicate with this server because the time since the last replication with this server has exceeded the tombstone lifetime.
0x0000021A7  The requested operation is not allowed on an object under the system container.
0x000021A8  The LDAP server's network send queue is full because the client is not processing the results of its requests fast enough. No further requests will be processed until the client catches up. If the client doesn't catch up, it will be disconnected.
0x0000021A9  The scheduled replication did not occur because the system was too busy to complete the request within the schedule window. The replication queue is overloaded. Consider reducing the number of partners or reducing the planned frequency of replication.
0x00000021AA  Cannot currently determine if the branch replication policy is available on the hub domain controller. Please try again later to allow for replication latencies.
0x0000021AB  The site settings object for the specified site does not exist.
0x0000021AC  The local account store does not contain any classified material for the specified account.
0x0000021AD  A writable domain controller could not be found in the domain.
0x0000021AE  The server object for the domain controller does not exist.
0x00000021AF  The NTDS Settings object for the domain controller does not exist.
0x00000021B0  The requested search operation is not supported for ASQ searches.
0x0000021B1  A required audit event could not be generated for the operation.
0x0000021B2  The search flags for the attribute are invalid. The subtree index bit is only valid for single-valued attributes.
0x0000021B3  The search flags for the attribute are invalid. The tuple index bit is only valid for Unicode string attributes.
0x00000021B4  The address books are nested too deeply. The hierarchy table could not be created.
0x0000021B5  The specified recency vector is corrupt.
0x0000021B6  The request to replicate secrets is denied.
0x0000021B7  Schema update failed: MAPI identifier is reserved.
0x00000021B8  Schema update failed: no MAPI IDs are available.
0x0000021B9  The replication operation failed because the required attributes of the local krbtgt object are missing.
0x0000021BA  The domain name of the trusted domain already exists in the forest.
0x0000021BB  The trusted domain flat name already exists in the forest.
0x0000021BC  The user principal name (UPN) is invalid.
0x00000021BD  OID mapped groups cannot have members.
0x0000021BE  The specified OID cannot be found.
0x00000021BF  The replication operation failed because the target object referenced by a link value is being reused.
0x00002329  DNS server cannot interpret format.
$000232A 9002 DNS-Serverfehler.
0x00000232B  DNS name does not exist.
0x00000232C  DNS request is not supported by the name server.
0x00000232D  DNS operation refused.
0x0000232E DNS name that should not exist does exist.
0x0000232F  DNS RR record that should not exist does exist.
0x00002330  DNS RR record that should exist does not exist.
0x00002331  DNS server not authoritative for zone.
0x00002332  DNS name in update or prereq is not in zone.
0x00002338  DNS signature could not be verified.
0x00002339  Invalid DNS key.
0x00000233A  DNS signature validity expired.
0x00000251D  No records were found for the specified DNS query.
0x00000251E  Invalid DNS packet.
0x00000251F  No DNS packet.
0x00002520  DNS error, check rcode.
0x00002521  Unsecured DNS packet.
0x00000254F  Invalid DNS type.
0x00002550  Invalid IP address.
0x00002551  Invalid property.
0x00002552  Try DNS operation again later.
0x00002553  First name and type record is not unique.
0x00002554  DNS name does not conform to RFC specifications.
0x00002555  The DNS name is a fully qualified DNS name.
0x00002556 9558 DNS name is dotted (multi-label).
0x00002557  The DNS name is a one-part name.
0x00002558  The DNS name contains an invalid character.
0x00002559  The DNS name is all numeric.
0x00000255A  The requested operation is not allowed on a DNS root server.
0x00000255B  The record could not be created because this portion of the DNS namespace has been delegated to another server.
0x00000255C  The DNS server could not find a set of root hints.
0x00000255D  The DNS server found root hints but they were not consistent across adapters.
0x00000255E  The value specified is too small for this parameter.
0x0000255F  The specified value is too large for this parameter.
0x00002560  This operation is not allowed while the DNS server is loading zones in the background. Please try again later.
0x0002561  The requested operation is not allowed for a DNS server running on a read-only domain controller.
0x00002562  There must be no data under a DNAME entry.
0x00002563  This operation requires delegation of credentials.
0x00002564  The name resolution policy table has been corrupted. DNS resolution will fail until fixed. Contact your network administrator.
0x00002581  DNS zone does not exist.
0x00002582  DNS zone information not available.
0x00002583  Invalid DNS zone operation.
0x00002584  Invalid DNS zone configuration.
0x00002585  The DNS zone does not have an SOA (Start of Authority) record.
0x00002586  DNS zone does not have a Name Server (NS) record.
0x00002587  DNS zone is locked.
0x00002588  DNS zone creation failed.
0x00002589  DNS zone already exists.
0x0000258A 9610 Automatic DNS zone already exists.
0x00000258B  Invalid DNS zone type.
0x00000258C  Secondary DNS zone requires master IP address.
0x00000258D  DNS zone not secondary.
0x00000258E  Secondary IP address required.
0x00000258F  WINS initialization failed.
0x00002590  Requires WINS server.
0x0002591  NBTSTAT initialization call failed.
0x00002592  Invalid deletion of start of authority (SOA)
0x00002593  A conditional forwarding zone already exists for this name.
0x00002594  This zone must be configured with one or more master DNS server IP addresses.
0x00002595  The operation cannot be performed because this zone is down.
0x00000025B3  Primary DNS zone requires data file.
0x0000025B4  Invalid data file name for DNS zone.
0x00000025B5  Error opening DNS zone data file.
0x00000025B6  Error writing DNS zone data file.
0x00000025B7  Error reading data file for DNS zone.
0x0000025E5  DNS record does not exist.
0x000025E6  DNS record format error.
0x00000025E7  Failed to create node in DNS.
0x0000025E8  Unknown DNS record type.
0x000025E9  DNS record timed out.
$000025EA  Name nicht in DNS-Zone.
0x000025EB  CNAME loop detected.
0x000025EC  Node is a CNAME DNS record.
0x000025ED 9709 A CNAME entry already exists for the first name.
0x00000025EE  Record only in root of DNS zone.
0x000025EF  DNS record already exists.
0x00000025F0  Secondary DNS zone data error.
0x0000025F1  DNS cache data could not be created.
0x0000025F2  DNS name does not exist.
0x0000025F3  Failed to create pointer record (PTR).
0x000025F4  DNS domain recovered.
0x0000025F5  The directory service is not available.
0x000025F6  DNS zone already exists in the directory service.
0x00000025F7  DNS server does not create or read the startup file for the directory service's built-in DNS zone.
0x000025F8  node is a DNAME DNS record.
0x000025F9  A DNAME entry already exists for the first name.
0x00000025FA  An alias loop was detected with CNAME or DNAME records.
0x00002617  DNS AXFR (zone transfer) completed.
0x00002618  DNS zone transfer failed.
0x00002619  Added local WINS server.
0x00002649  Secure update call must continue update request.
0x00000267B  TCP/IP network protocol not installed.
0x00000267C  No DNS servers configured for local system.
0x0000026AD  The specified directory partition does not exist.
0x0000026AE  The specified directory partition already exists.
0x00000026AF  This DNS server is not listed in the specified directory partition.
0x00000026B0  This DNS server is already listed in the specified directory partition.
0x0000026B1  The directory partition is currently unavailable. Please wait a few minutes and try again.
0x0000026B2  The application directory partition operation failed. The domain controller with the domain naming master role is down or cannot service the request, or Windows Server 2003 is not running.
0x00002714  A blocking operation was interrupted by a call to WSACancelBlockingCall.
0x00002719  The specified file handle is invalid.
0x0000271D  An attempt was made to access a socket in a way prohibited by its access permissions.
0x00000271E  The system encountered an invalid pointer address when attempting to use a pointer argument in a call.
0x00002726  An invalid argument was specified.
0x00002728  Too many open sockets.
0x00002733 10035] A non-blocking socket operation could not be completed immediately.
0x00002734 10036 A blocking operation is in progress.
0x00002735 10037] An operation was attempted on a non-blocking socket that already has an operation in progress.
0x00002736  An attempt was made to perform an operation on something that is not a socket.
0x00002737  A required address was omitted from an operation on a socket.
0x00002738  A message sent over a datagram socket was larger than the internal message buffer or other network limit, or the buffer used to receive a datagram was smaller than the datagram itself.
0x00002739  A protocol was specified in the socket function call that does not support the semantics of the requested socket type.
0x0000273A  An unknown, invalid, or unsupported option or level was specified in a getsockopt or setsockopt call.
0x00000273B  The requested protocol has not been configured in the system or there is no implementation for it.
0x00000273C  Support for the specified socket type does not exist in this address family.
0x0000273D  The attempted operation is not supported for the referenced object type.
0x00000273E  The protocol family has not been configured in the system or there is no implementation for it.
0x0000273F  An address incompatible with the requested protocol was used.
0x00002740  Only one use of each socket address (protocol/network address/port) is normally allowed.
0x00002741  The requested address is not valid in its context.
0x00002742  A dead network occurred during a socket operation.
0x00002743 10051] Attempting to perform a socket operation with an unreachable network.
0x00002744  The connection was lost because keep-alive activity encountered an error while the operation was in progress.
0x00002745  An established connection was aborted by the software on your host computer.
0x00002746  An existing connection was forcibly closed by the remote host.
0x00002747  An operation on a socket could not be performed because the system ran out of buffer space or a queue was full.
0x00002748  A connection request was made for a socket that was already connected.
0x00002749  A request to send or receive data was disallowed because the socket is not connected and (when sending over a datagram socket with a sendto call) no address was specified.
0x00000274A 10058] A request to send or receive data was disallowed because the socket in that direction was already shut down with a previous shutdown call.
0x00000274B  Too many references to a kernel object.
0x0000274C 10060 A connection attempt failed because the connected party did not respond properly after some time, or the established connection failed because the connected host did not respond.
0x0000274D 10061 A connection could not be established because the target computer actively refused it.
0x00000274E  Name cannot be translated.
0x0000274F 10063 Name part or name was too long.
0x00002750  A socket operation failed because the target host was down.
0x00002751  An attempt was made to perform a socket operation with an unreachable host.
0x00002752  A directory that is not empty cannot be removed.
0x00002753  A Windows Sockets implementation may have a limit on the number of applications that can use it at the same time.
0x00002754 10068 Quota exhausted.
0x00002755  Disk quota full.
0x00002756 10070] File handle reference is no longer available.
0x00002757  Item is not available locally.
0x0000276B 10091 WSAStartup cannot function at this time because the underlying system it uses to provide network services is currently unavailable.
0x00000276C  The requested Windows Sockets version is not supported.
0x00000276D  Either the application did not call WSAStartup or WSAStartup failed.
0x00002775 10101 Returned by WSARecv or WSARecvFrom to indicate that the peer initiated a proper shutdown sequence.
0x00002776  No more results can be returned from WSALookupServiceNext.
0x00002777  A call to WSALookupServiceEnd was made while this call was still being processed. The call was canceled.
0x00002778  The procedure call table is invalid.
0x00002779  The requested service provider is invalid.
0x00000277A  The requested service provider could not be loaded or initialized.
0x00000277B  A system call failed.
0x0000277C 10108 No such service is known. The service cannot be found in the specified namespace.
0x0000277D  The specified class was not found.
0x0000277E  WSALookupServiceNext cannot return any more results.
0x00000277F  A call to WSALookupServiceEnd was made while this call was still being processed. The call was canceled.
0x00002780  A database query failed because it was actively denied.
0x00002AF9  No such host is known.
0x00002AFA  This is usually a transient error during hostname resolution and means the local server did not receive a response from an authoritative server.
0x00002AFB  An unrecoverable error occurred during a database lookup.
0x00002AFC  The requested name is valid, but no data of the requested type was found.
0x00002AFD  At least one reserve has arrived.
0x00002AFE  At least one path arrived.
0x00002AFF  There are no senders.
0x00002B00  There are no recipients.
0x00002B01  Reservation has been confirmed.
0x00002B02 11010 Error due to lack of resources.
0x00002B03 11011 Rejected for administrative reasons - invalid credentials.
0x000002B04  Unknown or conflicting style.
0x00002B05 11013 Problem with some parts of the filter specification or the vendor specific buffer in general.
0x00002B06 11014 problem with a part of the flow specification.
0x000002B07  General QOS error.
0x000002B08  An invalid or unrecognized service type was found in the flowspec.
0x000002B09  An invalid or inconsistent flow specification was found in the QOS structure.
0x000002B0A  Invalid provider-specific QOS buffer.
0x000002B0B  An invalid QOS filter style was used.
0x00002B0C 11020 An invalid QOS filter type was used.
0x00002B0D  An incorrect number of QOS FILTERSPECs was specified in the FLOWDESCRIPTOR.
0x00002B0E  An object with an invalid ObjectLength field was specified in the QOS provider specific buffer.
0x00002B0F 11023 An incorrect number of flow descriptors was specified in the QOS structure.
0x000002B10  An unknown object was found in the QOS provider specific buffer.
0x000002B11  An invalid policy object was found in the QOS provider-specific buffer.
0x000002B12  An invalid QOS flow descriptor was found in the flow descriptor list.
0x000002B13  An invalid or inconsistent flow specification was found in the QOS provider specific buffer.
0x00002B14 11028 An invalid FILTERSPEC was found in the provider-specific QOS buffer.
0x000002B15  An invalid shape discard mode object was found in the QOS provider-specific buffer.
0x000002B16  An invalid shaping rate object was found in the QOS provider specific buffer.
0x000002B17  A reserved policy element was found in the provider-specific QOS buffer.
0x00002B18 11032 No such host is known for certain.
0x000002B19  Failed to add name-based IPSEC policy.
0x0000032C8  The specified quick mode policy already exists.
0x0000032C9  The specified quick mode policy was not found.
0x0000032CA  The specified quick mode policy will be used.
0x0000032CB  The specified main mode policy already exists.
0x0000032CC  The specified main mode policy was not found
0x00000032CD  The specified main mode policy will be used.
0x000032CE 13006 The specified main mode filter already exists.
0x0000032CF  The specified main mode filter was not found.
0x0000032D0  The specified transport mode filter already exists.
0x0000032D1  The specified transport mode filter does not exist.
0x0000032D2  The specified main mode authentication list exists.
0x0000032D3  The specified main mode authentication list was not found.
0x0000032D4  The specified main mode authentication list is used.
0x0000032D5  The specified default main mode policy was not found.
0x0000032D6  The specified main mode default authentication list was not found.
0x0000032D7  The specified default quick mode policy was not found.
0x0000032D8  The specified tunnel mode filter exists.
0x0000032D9  The specified tunnel mode filter was not found.
0x000032DA 13018 The main mode filter is about to be cleared.
0x000032DB 13019 The transport filter is about to be deleted.
0x000032DC 13020 The tunnel filter is about to be deleted.
0x00000032DD  The main mode policy is about to be deleted.
0x00000032DE  The main mode authentication package is about to be deleted.
0x0000032DF  The quick mode policy is about to be deleted.
0x00000032E0  The main mode policy was added successfully, but some of the requested offers are not supported.
0x00000032E1  The quick mode policy was added successfully, but some of the requested offers are not supported.
0x000035E8  ERROR_IPSEC_IKE_NEG_STATUS_BEGIN
0x0000035E9  IKE authentication credentials are not acceptable
0x000035EA 13802 IKE security attributes are not acceptable
0x000035EB  IKE negotiation in progress
0x0000035EC  General processing error
0x000035ED 13805 Negotiation timed out
0x0000035EE  IKE could not find a valid machine certificate. Contact your network security administrator to install a valid certificate in the appropriate certificate store.
0x000035EF 13807 IKE SA deleted by peer before setup was complete
0x000035F0 13808 IKE SA cleared before setup was complete
0x000035F1 13809 Negotiation request was queued too long
0x000035F2  The negotiation request was queued too long
0x000035F3  The negotiation request was queued too long
0x000035F4  The negotiation request was queued too long
0x0000035F5  No response from peer
0x000035F6  Negotiation took too long
0x000035F7  Negotiation took too long
0x0000035F8  Unknown error occurred
0x0000035F9  Certificate revocation check failed
0x0000035FA  Invalid use of certificate key
0x0000035FB  Invalid certificate type
0x00000035FC  IKE negotiation failed because the machine certificate used does not have a private key. IPsec certificates require a private key. Contact your Network Security Administrator to replace the certificate with a private key certificate.
0x000035FD 13821 Simultaneous rekeys were detected.
0x0000035FE  Error in Diffie-Hellman calculation
0x0000035FF  No idea how to handle critical payload
0x0003600  Invalid header
0x00003601  No policy configured
0x0003602  Error verifying signature
0x0003603  Error authenticating with Kerberos
0x00003604  The peer's certificate did not have a public key
0x0003605  Error processing error payload
0x0003606  Error processing SA payload
0x0003607  Error processing offer payload
0x0003608  Error processing transform payload
0x0003609  Error processing KE payload
0x0000360A  Error processing ID payload
0x0000360B  Error processing cert payload
0x000360C  Error processing certificate request payload
0x0000360D  Error processing hash payload
0x0000360E  Error processing signature payload
0x0000360F  Error processing nonce payload
0x00003610  Notify error processing payload
0x0003611  Error processing clear payload
0x0003612  Error processing VendorId payload
0x0003613  Invalid payload received
0x00003614  Soft SA loaded
0x00003615 13845 Soft SA torn down
0x0003616  Invalid cookie received.
0x0003617  Peer could not send a valid machine certificate
0x0003618  Certification revocation check of peer certificate failed
0x00003619  New policy invalidated SAs created with old policy
0x00000361A  There is no IKE policy available for main mode.
0x0000361B  Error activating TCB privilege.
0x0000361C  Error loading SECURITY.DLL.
0x0000361D  Error getting SSPI security function table dispatch address.
0x00000361E  Error querying Kerberos package to get maximum token size.
0x00000361F  Error getting Kerberos server credentials for ISAKMP/ERROR_IPSEC_IKE service. Kerberos authentication does not work. The most likely reason for this is lack of domain membership. This is normal if your computer is a member of a workgroup.
0x0003620  Error getting SSPI principal name for ISAKMP/ERROR_IPSEC_IKE service (QueryCredentialsAttributes).
0x0003621  Failed to get a new SPI for the inbound SA from the ipsec driver. The most common reason for this is that the driver does not have the correct filter. Check your policy to verify the filters.
0x00003622  The specified filter is invalid
0x0003623  Failed to allocate memory.
0x0003624  Error adding security association to ipsec driver. The most common reason for this is that the IKE negotiation took too long. If the problem persists, reduce the load on the faulty computer.
0x0003625  Invalid policy
0x0003626  Invalid DOI
0x0003627  Invalid situation
0x0003628  Diffie-Hellman error
0x0003629  Invalid Diffie-Hellman group
0x00000362A  Error encrypting user data
0x00000362B  Error decrypting payload
0x0000362C  Policy compliance error
0x00000362D  Unsupported ID
0x00000362E  Hash verification failed
0x00000362F  Invalid hash algorithm
0x0003630  Invalid hash size
0x0003631  Invalid encryption algorithm
0x0003632  Invalid authentication algorithm
0x0003633  Invalid certificate signature
0x0003634  Load failed
0x00003635  Deleted via RPC call
0x00003636  Temporary state created to perform reinstallation. This isn't really an error.
0x00003637  The lifetime value received in Responder Lifetime Notify is below the Windows 2000 configured minimum value. Please correct the policy on the peer computer.
0x0003638  The recipient cannot process the IKE version specified in the header.
0x00003639  The key length in the certificate is too small for the configured security requirements.
0x0000363A 13882 Maximum number of established MM-SAs to the peer exceeded.
0x00000363B  IKE received a policy that disables negotiation.
0x00000363C  Reached maximum quick mode limit for main mode. The new main mode will start.
0x0000363D  The main mode SA lifetime has expired or the peer sent a main mode delete.
0x0000363E 13886 Main mode SA assumed invalid because peer stopped responding.
0x00000363F  The certificate does not chain to a trusted root in the IPsec policy.
0x0003640  Unexpected message ID received.
0x0003641  Invalid authentication offers received.
0x0003642  DoS cookie notification sent to initiator.
0x0003643  The IKE service is shutting down.
0x0003644  The binding between CGA address and certificate could not be verified.
0x0003645  Error processing NatOA payload.
0x00003646  Main mode parameters are invalid for this quick mode.
0x00003647  Quick Mode SA has been expired by the IPsec driver.
0x00003648  Too many dynamically added IKEEXT filters were detected.
0x00003649  ERROR_IPSEC_IKE_NEG_STATUS_END
0x0000364A 13898 NAP Reauth successful and needs to clear the dummy NAP IkeV2 tunnel.
0x0000364B  Failed to assign inner IP address to initiator in tunnel mode.
0x0000364C  Required configuration payload is missing.
0x0000364D  A negotiation is in progress because the security principal that established the connection is in progress
0x0000364E  SA was deleted due to IKEv1/AuthIP coexistence suppression check.
0x0000364F  Incoming SA request was discarded due to peer IP address rate limiting.
0x00003650  peer does not support MOBIKE
0x0003651 13905 SA facility is not authorized.
0x00003652  The SA setup is not authorized because it does not have a sufficiently strong PKINIT-based credential.
0x0003653 13907 SA setup is not authorized. You may need to enter updated or different credentials, such as a smart card.
0x00003654  The SA setup is not authorized because it does not have a sufficiently strong PKINIT-based credential. This may be related to a certificate-to-account mapping error for the SA.
0x00003655  ERROR_IPSEC_IKE_NEG_STATUS_EXTENDED_END
0x00003656  The SPI in the packet does not match a valid IPsec SA.
0x00003657  Packet received on an IPsec SA that has expired.
0x00003658  Packet received on an IPsec SA that does not match the packet properties.
0x0003659  Verification of packet sequence number representation failed.
0x00000365A  The IPsec header and/or trailer in the packet is invalid.
0x00000365B  IPsec integrity check failed.
0x00000365C  IPsec dropped a plaintext packet.
0x00000365D  IPsec dropped an incoming ESP packet in authenticated firewall mode. This waste is benign.
0x0000365E  IPsec dropped a packet due to DoS throttling.
0x00003665  IPsec DoS protection matched an explicit blocking rule.
0x00003666  IPsec DoS Protection received an IPsec-specific multicast packet that is not allowed.
0x00003667  IPsec DoS protection received a malformed packet.
0x00003668  IPsec DoS protection could not determine the status.
0x00003669  IPsec DoS Protection could not create a state because the maximum number of entries allowed by the policy was reached.
0x00000366A  IPsec DoS protection received an IPsec negotiation packet for a key module that is not allowed by the policy.
0x00000366B  IPsec DoS protection has not been enabled.
0x00000366C  IPsec DoS protection could not create a queue per internal IP rate limit because the maximum number of queues allowed by the policy was reached.
0x000036B0  The requested section did not exist in the activation context.
0x0000036B1  The application failed to start because its side-by-side configuration is incorrect. For more information, see the application event log or use the sxstrace.exe command line tool.
0x0000036B2  The application binding data format is invalid.
0x0000036B3  The referenced assembly is not installed on your system.
0x0000036B4  The manifest file does not begin with the required tag and format information.
0x00000036B5  The manifest file contains one or more syntax errors.
0x00000036B6  The application attempted to activate a disabled activation context.
0x0000036B7  The requested search key was not found in any active activation context.
0x0000036B8  A component version required by the application conflicts with another component version that is already active.
0x0000036B9  The activation context part requested by the type does not match the query API used.
0x00000036BA  Lack of system resources required disabling isolated activation for the current thread of execution.
0x0000036BB  An attempt to set the process's default activation context failed because the process's default activation context has already been set.
0x0000036BC  The specified encoding group identifier is not recognized.
0x0000036BD  The requested encoding is not recognized.
0x00000036BE  The manifest contains a reference to an invalid URI.
0x00000036BF  The application manifest contains a reference to a dependent assembly that is not installed
0x00000036C0  The manifest for an assembly used by the application contains a reference to a dependent assembly that is not installed
0x00000036C1  The manifest contains an invalid assembly identity attribute.
0x00000036C2  The manifest is missing the required default namespace specification for the assembly element.
0x00000036C3  The manifest has a default namespace specified on the assembly item, but its value is not "urn:schemas-microsoft-com:asm.v1".
0x00000036C4  The examined private manifest crossed a path with an unsupported reparse point.
0x0000036C5  Two or more components referenced directly or indirectly by the application manifest have files with the same name.
0x00000036C6  Two or more components referenced directly or indirectly by the application manifest have window classes with the same name.
0x00000036C7  Two or more components referenced directly or indirectly by the application manifest have the same COM server CLSIDs.
0x00000036C8  Two or more components referenced directly or indirectly by the application manifest have proxies for the same COM interface IIDs.
0x00000036C9  Two or more components referenced directly or indirectly by the application manifest have the same COM type library TLBIDs.
0x00000036CA  Two or more components referenced directly or indirectly by the application manifest have the same COM ProgIDs.
0x00000036CB  Two or more components referenced directly or indirectly by the application manifest are different versions of the same component, which is not allowed.
0x00000036CC  A component's file does not match the verification information in the component's manifest.
0x0000036CD  The policy manifest contains one or more syntax errors.
0x000036CE 14030 Manifest Parse Error: Expected a string literal but no opening quote was found.
0x00000036CF  Manifest Parse Error: Incorrect syntax was used in a comment.
0x00000036D0  Manifest Parse Error: A name started with an invalid character.
0x0000036D1  Manifest Parse Error: A name contained an invalid character.
0x00000036D2  Manifest Parse Error: A string literal contained an invalid character.
0x0000036D3  Manifest Parse Error: Invalid syntax for an XML declaration.
0x00000036D4  Manifest Parse Error: An invalid character was found in the text content.
0x0000036D5  Manifest Parse Error: Required white space was missing.
0x0000036D6  Manifest Parse Error: The character " was expected.
0x0000036D7  Manifest Parse Error: A semicolon was expected.
0x0000036D8  Manifest Parse Error: Unbalanced parentheses.
0x0000036D9  Manifest Parse Error: Internal error.
0x000036DA  Manifest Parse Error: Spaces are not allowed here.
0x000036DB 14043 Manifest Parse Error: The end of file was reached in an invalid state for the current encoding.
0x0000036DC  Manifest Parse Error: Missing parenthesis.
0x000036DE  Manifest Parse Error: Multiple colons are not allowed in a name.
0x000036DF 14047 Manifest Parse Error: Invalid character for decimal digit.
0x000036E0 14048 Manifest Parse Error: Invalid character for hexadecimal digit.
0x000036E1 14049 Manifest Parse Error: Invalid Unicode character value for this platform.
0x000036E2 14050 Manifest Parse Error: Expected spaces or "?".
0x0000036E3  Manifest Parse Error: End tag was not expected at this position.
0x0000036E5  Manifest Parse Error: Duplicate attribute.
0x000036E6 14054 Manifest Parsing Error: Only one top-level element is allowed in an XML document.
0x00000036E7  Manifest Parse Error: Invalid at the top level of the document.
0x000036E8 14056 Manifest Parse Error: Invalid XML declaration.
0x000036E9 14057 Manifest Parse Error: The XML document must have a top-level element.
0x0000036EA  Manifest Parse Error: Unexpected end of file.
0x000036EB 14059 Manifest Parse Error: Cannot use parameter entities within markup declarations in an internal subset.
0x0000036EC  Manifest Parse Error: Item was not closed.
0x000036ED 14061 Manifest parsing error: The character " was missing in the end element
0x000036EE 14062 Manifest Parse Error: A string literal was not closed.
0x000036EF 14063 Manifest Parse Error: A comment was not closed.
0x0000036F0  Manifest Parse Error: A declaration was not closed.
0x0000036F1  Manifest Parse Error: A CDATA section was not closed.
0x000036F2 14066 Manifest Parse Error: The namespace prefix cannot start with the reserved string 'xml'.
0x000036F3 14067 Manifest Parse Error: The system does not support the specified encoding.
0x000036F4 14068 Manifest Parse Error: Switching from the current encoding to the specified encoding is not supported.
0x000036F5 14069 Manifestanalysefehler: Der Name „xml“ ist reserviert und muss in Kleinbuchstaben geschrieben werden.
0x000036F6 14070 Manifest Parse Error: The standalone attribute must have a value of yes or no.
0x0000036F7  Manifest Parse Error: The standalone attribute cannot be used in external entities.
0x0000036F8  Manifest Parse Error: Invalid version number.
0x0000036F9  Manifest Parse Error: Missing equal sign between attribute and attribute value.
0x0000036FA  Assembly Protection Error: The specified assembly could not be restored.
0x000036FB 14075 Assembly Protection Error: The public key for an assembly was too short to be allowed.
0x000036FC 14076 Assembly Protection Error: The catalog for an assembly is invalid or does not match the assembly's manifest.
0x00000036FD  An HRESULT could not be translated into a corresponding Win32 error code.
0x0000036FE  Assembly Protection Error: The catalog for an assembly is missing.
0x00000036FF  The provided assembly identity is missing one or more attributes that must be present in this context.
0x00003700  The provided assembly identity has one or more attribute names that contain characters that are not allowed in XML names.
0x00003701  The referenced assembly could not be found.
0x00003702  The activation context activation stack for the current execution thread is corrupt.
0x00003703  The application isolation metadata for this process or thread is corrupt.
0x00003704  The activation context to be deactivated is not the last activated one.
0x00003705  The activation context to be deactivated is not active for the current execution thread.
0x00003706  The activation context to be deactivated has already been deactivated.
0x00003707  A component used by the isolation facility has requested the process to end.
0x00003708  A kernel-mode component releases a reference to an activation context.
0x0003709  The activation context of the system default assembly could not be generated.
0x00000370A  The value of an attribute in an identity is out of range.
0x00000370B  The name of an attribute in an identity is out of range.
0x00000370C  An identity contains two definitions for the same attribute.
0x0000370D  The identity string is malformed. This can be due to a trailing comma, more than two unnamed attributes, a missing attribute name, or a missing attribute value.
0x0000370E 14094 A localized replaceable content string was malformed. Either a dollar sign ($) was followed by something other than a left parenthesis or another dollar sign, or the right parenthesis of a substitution was not found.
0x00000370F  The public key token does not match the given public key.
0x00003710  A substitution string had no mapping.
0x00003711  The component must be locked before the request.
0x00003712  The component store has been corrupted.
0x0003713  An advanced installer failed during setup or maintenance.
0x00003714  The character encoding in the XML declaration did not match the encoding used in the document.
0x00003715  Manifest identities are the same, but their content is different.
0x00003716  The component identities are different.
0x00003717  The assembly is not a deployment.
0x00003718  The file is not part of the assembly.
0x00003719  The size of the manifest exceeds the maximum allowed.
0x00000371A  The setting is not registered.
0x00000371B  At least one required member of the transaction does not exist.
0x0000371C  The simple SMI installer failed during setup or maintenance.
0x0000371D  A generic command executable returned a result indicating an error.
0x00000371E  A component is missing file verification information in its manifest.
0x00003A98  The specified channel path is invalid.
0x00003A99  The specified query is invalid.
0x00003A9A  The publisher metadata cannot be found in the resource.
0x00003A9C  The specified publisher name is invalid.
0x00003A9D 15005 The event data raised by the publisher is incompatible with the event template definition in the publisher's manifest
0x00003A9F  The specified channel could not be found. Check the channel configuration.
0x000003AA0  The specified XML text was not well-formed. See Extended Error for more details.
0x00003AA1  The caller is trying to subscribe to a direct channel, which is not allowed. The events for a direct channel go directly to a log file and cannot be subscribed to.
0x00003AA2  Configuration error.
0x00003AA3  The query result is outdated/invalid. This may be due to the log being cleared or moved after the query result is created. Users should handle this code by freeing the query result object and reissuing the query.
0x00003AA4  The query result is currently in an invalid position.
0x000003AA5  Registered MSXML does not support validation.
0x00003AA6  An expression can only be followed by a change of scope operation if it itself evaluates to a node set and is not already part of another change of scope operation.
0x000003AA7  A step operation cannot be performed from a term that is not a member set.
0x00003AA8  Left-hand arguments of binary operators must be either attributes, nodes, or variables, and right-hand arguments must be constants.
0x00003AA9  A step operation must include either a node test or, in the case of a predicate, an algebraic expression against which each node in the node-set identified by the preceding node-set can be tested.
0x00003AAA  This data type is not currently supported.
0x000003AAC  This implementation of the filter does not support this operator.
0x000003AAD  The token found was unexpected.
0x000003AAE  The requested operation cannot be performed over an enabled direct channel. The channel must first be disabled before the requested operation can be performed.
0x00003AB1  The channel cannot be activated.
0x00003AB2  The xpath expression has exceeded the supported complexity. Please simplify it or break it down into two or more simple expressions.
0x00003AB3  The message resource exists, but the message was not found in the string/message table
0x00003AB4  The message ID for the requested message could not be found.